The Zhanjiang Formation gray clay has physical properties similar to the muddy clay of other areas, such as a large void ratio and high-water content. At the same time, it also has mechanical properties that differ from muddy clay in other areas, such as high strength and low compressibility. When calculating the foundation settlement, the equation that calculates the foundation settlement as suggested by the code tends to produce values of compression modulus that are too small, which leads to larger calculated values. This study investigated the relationship between the pressure and deformation of Zhanjiang Formation gray clay foundations with different densities, water content, and stress histories by means of a plate loading model test. It revealed the influence of these factors on the deformation modulus, and the quantitative relationship between this modulus and the density of soils, water content, and the over consolidation ratio was established. In doing so, the aforementioned quantitative relationship was applied to the equation which calculated the foundation settlement as suggested by the current code, thereby proposing a pertinent formula relevant to Zhanjiang Formation gray clay foundations. The formula was subsequently applied to two engineering examples, and the settlement amounts output were in agreement with actual measured values, indicating it is reasonable and feasible for practical application. Therefore, it can provide a reference for the calculation of foundation settlements across the coastal area of Beibu Gulf.
Settlement values calculated per the current “Code for Design of Building Foundations” demonstrate significant discrepancies when compared to the actual measured settlement values observed after disturbing a strong, cohesive soil foundation. This inconsistency introduces uncertainties in engineering design. To investigate the deformation behavior of highly structured clay, which is particularly sensitive to disturbances, this study employed a shaking table to subject undisturbed soil samples to various disturbance levels. The shaking frequencies were set at 20 Hz, 35 Hz, and 50 Hz, with durations of 30, 60, 90, and 120 min. One-dimensional compression tests were performed to examine the relationship between soil deformation parameters and overburden pressure, alongside an analysis of the deformation process and pore structure damage in the highly structured clay. A fitting process using Origin software was utilized to develop a deformation modulus calculation model that accounted for disturbance and damage effects, aiming to enhance the accuracy of foundation settlement predictions. The results indicate that the proposed empirical formula for the deformation modulus is highly reliable, which is essential for improving the precision of foundation settlement calculations and ensuring engineering safety.