Application of ultrasound during crystallization can efficiently inhibit agglomeration. However, the mechanism is unclear and sonication is usually enabled throughout the entire process, which increases the energy demand. Additionally, improper operation results in significant crystal damage. Therefore, the present work addresses these issues by identifying the stage in which sonication impacts agglomeration without eroding the crystals. This study was performed using a commercially available API that showed a high tendency to agglomerate during seeded crystallization. The crystallization progress was monitored using process analytical tools (PAT), including focus beam reflectance measurements (FBRM) to track to crystal size and number and Fourier transform infrared spectroscopy (FTIR) to quantify the supersaturation level. These tools provided insight in the mechanism by which ultrasound inhibits agglomeration. A combination of improved micromixing, fast crystal formation which accelerates depletion of the supersaturation and a higher collision frequency prevent crystal cementation to occur. The use of ultrasound as a post-treatment can break some of the agglomerates, but resulted in fractured crystals. Alternatively, sonication during the initial seeding stage could assist in generating nuclei and prevent agglomeration, provided that ultrasound was enabled until complete desupersaturation at the seeding temperature. FTIR and FBRM can be used to determine this end point.
Controlling particle size is essential for crystal quality in the chemical and pharmaceutical industry. Several articles illustrate the potential of ultrasound to tune this particle size during the crystallization process. This paper investigates how ultrasound can control the particle size distribution (PSD) of acetaminophen crystals by continuous seed generation in a tubular crystallizer followed by batch growth. It is demonstrated that the supersaturation ratio at which ultrasound starts seed generation has a substantial effect on the final PSD while the applied power is insignificant in the studied conditions. The higher the supersaturation ratio, the smaller the final crystals become up to a supersaturation ratio of 1.56. Furthermore, it was shown that ultrasound can also impact the final PSD when applied during the growth phase. Frequencies of 850 kHz or below reduce the final particle size; the lower the applied frequency, the smaller the crystals become. In conclusion, one could state that ultrasound is able to control the particle size during seed generation and subsequent growth until the final particle size.