Curve is the traffic accident-prone area in the traffic system of the structural road. How to effectively detect the lane-line and timely give the traffic information ahead for drivers is a difficult point for the assisted safe driving. The traditional lane detection technology is not very applicable in the curved road conditions. Thus, a curve detection algorithm which is based on straight-curve model is proposed in this paper and this method has good applicability for most curve road conditions. First, the method divides the road image into the region of interest and the road background region by analyzing the basic characteristics of the road image. The region of interest is further divided into the straight region and the curve region. At the same time, the straight-curve mathematical model is established. The mathematical equation of the straight model is obtained by using the improved Hough transform. The polynomial curve model is established according to the continuity of the road lane-line and the tangent relationship between the straight model and the curve model. Then, the parameters of the curve model equation are solved by the curve fitting method. Finally, the detection and identification of the straight and the curve are realized respectively and the road lane-line is reconstructed. Experiments show that this method can accurately identify the curve lane-line, provide effective traffic information, make early warning and it also has a certain universality.
Efficient navigation of multiple autonomous underwater vehicles (AUVs) plays an important role in monitoring underwater and off-shore environments. It has encountered challenges when AUVs work in complex underwater environments. Traditional swarm intelligence (SI) optimization algorithms have limitations such as insufficient path exploration ability, susceptibility to local optima, and difficulty in convergence. To address these issues, we propose an improved multi-objective manta ray foraging optimization (IMMRFO) method, which can improve the accuracy of trajectory planning through a comprehensive three-stage approach. Firstly, basic model sets are established, including a three-dimensional ocean terrain model, a threat source model, the physical constraints of AUV, path smoothing constraints, and spatiotemporal coordination constraints. Secondly, an innovative chaotic mapping technique is introduced to initialize the position of the manta ray population. Moreover, an adaptive rolling factor “S” is introduced from the manta rays’ rolling foraging. This allows the collaborative-vehicle population to jump out of local optima through “collaborative rolling." In the processes of manta ray chain feeding and manta ray spiral feeding, Cauchy reverse learning is integrated to broaden the search space and enhance the global optimization ability. The optimal Pareto front is then obtained using non-dominated sorting. Finally, the position of the manta ray population is mapped to the spatial positions of multi-AUVs, and cubic spline functions are used to optimize the trajectory of multi-AUVs. Through detailed analysis and comparison with five existing multi-objective optimization algorithms, it is found that the IMMRFO algorithm proposed in this paper can significantly reduce the average planned path length by 3.1~9.18 km in the path length target and reduce the average cost by 18.34~321.872 in the cost target. In an actual off-shore measurement process, IMMRFO enables AUVs to effectively bypass obstacles and threat sources, reduce risk costs, and improve mobile surveillance safety.
17 May 2024 in IEEE Transactions on Intelligent Vehicles
The application of air-ground collaborative network has become increasingly widespread in intelligent vehicular systems. In order to effectively utilize multiple unmanned aerial vehicles (UAVs) to provide fast services and improve resource allocation for air-ground vehicular network, this paper proposes a 3D terrain-oriented path planning algorithm for multi-UAVs assisted intelligent vehicular network based on swarm intelligence optimization. It is aimed to address UAVs' air-ground path planning in complex 3D terrains, requiring substantial computation. However, the current multi-objective bald eagle search algorithm tends to approach the center point, resulting in low accuracy when solving such problems. Firstly, the 3D terrain environment model, threat source model, and other models were constructed, and the multi-objective cost function was determined. Secondly, a coupled chaotic map initialization was designed to effectively improve the quality of the initialized population. In addition, an adaptive Gaussian walk strategy based on the “reconnaissance eagle” was designed to balance development and search capabilities. The fast non-dominated sorting was introduced to further improve the algorithmic efficiency. Finally, we utilized the correlation between the position of the bald eagle and UAV flight parameters of speed, turning angle, and climbing angle. An improved multi-objective bald eagle search (IMBES) was designed to efficiently search for UAV configuration space and find the optimal Pareto front. The experimental results show that the designed IMBES algorithm has a success rate of 70.50%. This proposed method offers improved optimization ability, smoother paths, and reduced energy consumption for optimizing collaborative terrain-oriented air-ground path planning, compared with existing path planning methods.
Due to the high fog concentration in sea fog images, serious loss of image details is an existing problem, which reduces the reliability of aerial visual-based sensing platforms such as unmanned aerial vehicles. Moreover, the reflection of water surface and spray can easily lead to overexposure of images, and the assumed prior conditions contained in the traditional fog removal method are not completely valid, which affects the restoration effectiveness. In this paper, we propose a sea fog removal method based on the improved convex optimization model, and realize the restoration of images by using fewer prior conditions than that in traditional methods. Compared with dark channel methods, the solution of atmospheric light estimation is simplified, and the value channel in hue–saturation–value space is used for fusion atmospheric light map estimation. We construct the atmospheric scattering model as an improved convex optimization model so that the relationship between the transmittance and a clear image is deduced without any prior conditions. In addition, an improved split-Bregman iterative method is designed to obtain the transmittance and a clear image. Our experiments demonstrate that the proposed method can effectively defog sea fog images. Compared with similar methods in the literature, our proposed method can actively extract image details more effectively, enrich image color and restore image maritime targets more clearly. At the same time, objective metric indicators such as information entropy, average gradient, and the fog-aware density evaluator are significantly improved.
9 June 2025 in IEEE Transactions on Instrumentation and Measurement
Superficial defect detection on bridge piers is crucial for assessing the health condition of bridges. A novel ring vision acquisition system based on a climbing operation robot is proposed to aim at the limitations of existing Unmanned Aerial Vehicles (UAVs) and wall-climbing robots. In addition, to address the quadratic computational complexity of the Transformer-based model, a Vision Mamba-based defects detection model, Piers Defects-Mamba (PD-Mamba), is proposed, which contributes to more efficient inferencing the high-resolution defects images. Finally, field experiments were performed at Shouchun Bridge in Anhui Province, China. The results demonstrated that the robotic system could automate acquiring high-precision visual images of bridge piers’ superficial defects. The proposed PD-Mamba achieves 77.97% mean Intersection over Union (mIoU), 88.81% mean Precision (mP), 85.42% mean Recall (mR), and 87.05% mean F1-score (mF1) on the multi-category bridge pier defect dataset, exhibiting state-of-the-art (SOTA) performance, and has global modelling capability and linear computational complexity, which achieves accurate and efficient detection of bridge piers’ superficial defects. It is important to assess the health condition of the bridge.
With the advancement of remote sensing technology, the demand for the accurate monitoring and tracking of various targets utilizing unmanned aerial vehicles (UAVs) is increasing. However, challenges such as object deformation, motion blur, and object occlusion during the tracking process could significantly affect tracking performance and ultimately lead to tracking drift. To address this issue, this paper introduces a high-precision target-tracking method with anomaly tracking status detection and recovery. An adaptive feature fusion strategy is proposed to improve the adaptability of the traditional sum of template and pixel-wise learners (Staple) algorithm to changes in target appearance and environmental conditions. Additionally, the Moth Flame Optimization (MFO) algorithm, known for its strong global search capability, is introduced as a re-detection algorithm in case of tracking failure. Furthermore, a trajectory-guided Gaussian initialization technique and an iteration speed update strategy are proposed based on sexual pheromone density to enhance the tracking performance of the introduced re-detection algorithm. Comparative experiments conducted on UAV123 and UAVDT datasets demonstrate the excellent stability and robustness of the proposed algorithm.