In this work, we investigate the mechanical properties of an annealed high strength Ti-20Zr-6.5Al-4V alloy in uniaxial tensile tests in different directions. The results show that the alloy exhibits obvious anisotropic ductility in different directions, while the tensile strength of the alloy remains almost unchanged. This phenomenon is closely related to α laths with similar orientations along the prior-β grain boundaries. These α laths significantly affect the initiation and propagation of cracks when the alloy reaches its yield limit, thereby affecting the ductility of the alloy, such that it exhibits anisotropic ductility.

Metallic glasses (MGs) have excellent properties, such as high strength and low elastic modulus, can be used as reinforcement in metal matrix composites. In this paper, aluminum matrix composites reinforced with Fe₈₀Si₉B₁₁ MG strips with different weight contents (5, 10, 15, 20 and 25%) were produced by roll-bonding at an initial temperature of 450 °C and 80% deformation. Tensile mechanical tests showed that the tensile strength of the composite sheets containing 10% MG strips showed the highest tensile strength of 166 MPa. Further studies on the sandwich structured samples were conducted using high-pressure torsion (HPT) technology with various pressures of 0.55 GPa, 1.10 GPa, 1.65 GPa, and 2.20 GPa. X-ray diffractometry (XRD), scanning electron microscopy (SEM), TriboIndenter nanomechanical testing, and transmission electron microscopy (TEM) were used to study the microstructures, mechanical properties and the bonding interface of the material. The results show that the hardness near the interface presented a transition area. High-resolution TEM observation showed that physical metallurgical bonding can be achieved between MG and aluminum alloy. A preliminary fitting of metallurgical bonding conditions was carried out according to the experimental parameters of HPT and the interface bonding condition in this study.

A series of Ti₄₀Zr₂₅Cu₉Ni₈Be₁₈)_100-xTM_x (x = 0, 1, 2, 3, 4 at.%, TM = Nb, Y) Bulk amorphous alloys were designed and prepared using the copper mold casting method. The microstructures, glass forming ability and mechanical properties of the alloys were investigated by means of X-ray diffractometry (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), differential scanning colorimetry (DSC), depth-sensitive nanoindentation and uniaxial compressive test. The Bulk amorphous alloys with different ductility were investigated by measuring their plastic deformation energy (PDE) of the first pop-in events during loading. The relationships between the PDE value, shear band formation and ductility in Bulk amorphous alloys have been investigated. The results show that the PDE value decreases by the Nb addition and promotes the generation of multiple shear bands easily, which increase the fracture strength and plasticity significantly. Substituting Nb with Y has exactly the reverse effect. A useful rule for preparing of Bulk amorphous alloys with high plasticity is herein proposed, whereby the chemical composition of the Bulk amorphous alloys can be tailored to possess a lower PDE value.