Feature Selection (FS) is a major preprocessing stage which aims to improve Machine Learning (ML) models’ performance by choosing salient features, while reducing the computational cost. Several approaches are presented to select the most Optimal Features Subset (OFS) in a given dataset. In this paper, we introduce an FS-based approach named Reptile Search Algorithm–Snake Optimizer (RSA-SO) that employs both RSA and SO methods in a parallel mechanism to determine OFS. This mechanism decreases the chance of the two methods to stuck in local optima and it boosts the capability of both of them to balance exploration and explication. Numerous experiments are performed on ten datasets taken from the UCI repository and two real-world engineering problems to evaluate RSA-SO. The obtained results from the RSA-SO are also compared with seven popular Meta-Heuristic (MH) methods for FS to prove its superiority. The results show that the developed RSA-SO approach has a comparative performance to the tested MH methods and it can provide practical and accurate solutions for engineering optimization problems.
22 January 2024 in IEEE Transactions on Consumer Electronics
The Internet of Things (IoT) depends primarily on low-cost wireless sensors with limited energy capacity to allow pervasive monitoring and intelligent control. Nevertheless, unmanned aerial vehicle (UAV) can be used to connect remote terminals that are outside wireless coverage to IoT networks. This solution provides a means of extending the reach of IoT networks, offering more opportunities for monitoring and control. Despite this benefit, the UAV also suffers from low capacity onboard battery. To overcome these problems, solar energy is integrated with UAV, and wireless-powered communication (WPC) techniques are used for IoT terminals. Also, the non-orthogonal multiple access (NOMA) technique can be employed to address the massive connectivity issue of IoT terminals. By leveraging these advantages, we jointly optimize the three-dimensional UAV trajectory and time allocation for WPC powered IoT devices (IoTDs) underlaying solar-powered UAV. To achieve the target, in this paper, introduces a multiagent federated reinforcement learning (MAFAL) algorithm, which concentrates on maximizing energy efficiency (EE) while minimizing energy consumption, guaranteeing quality of service (QoS), fairness, and trajectory planning. The proposed algorithm aims to optimize the overall performance of the system by learning from the collective experience of multiple agents. Simulation result demonstrated that the proposed method achieves 56.84%, 68.45%, and 73.63% higher EE as compared to MAD2PG, DDPG, and DQN, respectively.
Electronic waste generation is increasing dramatically throughout the world. Consequently, this increase in E-waste harms the environment, health, and other aspects of human life. Moreover, hazardous substances and the informal disposal of E-waste severely threaten human health and the environment. Saudi Arabia is the largest Arab country in terms of electronic waste generation and is the Arab country that generates the most E-waste. Over the past few decades, several initiatives and policy implementations have been undertaken in the country. However, the management of E-waste is still a source of distress and an unresolved issue. Sustainable development requires much more effort, primarily efficient E-waste management, which can only be achieved by establishing a formal collection system, early forecasting, and accurate estimations. The purpose of this study is to provide an overview of the fundamental and emerging trends in E-waste production worldwide and in Saudi Arabia. This paper aims to summarize the hazardous elements present in E-waste, their dangerous effects, and the economic potential for recycling E-waste as a means of developing sustainable communities. This study explores the practices regarding efficient E-waste management and E-waste estimation and prediction globally, specifically in Saudi Arabia and other Arab countries. This study suggests that more than the use of a single management probe will be needed to achieve significant results. Instead, a complementary approach can be used to achieve the most effective results. Additionally, people should be aware of the importance of handling and recycling E-waste. This study emphasizes the importance of formal collection and documentation to ensure effective monitoring and sustainable development in any developed country.
With the increasing worldwide population and the requirement for efficient approaches to farm care and irrigation, the demand for water is constantly rising, and water resources are becoming scarce. This has led to the development of smart water management systems that aim to improve the efficiency of water management. This paper pioneers an effective Irrigation Water Quality Prediction (IWQP) model using a convolution neural architecture that can be trained on any general computing device. The developed IWQP4Net is assessed using several evaluation measurements and compared to the Logistic Regression (LR), Support Vector regression (SVR), and k-Nearest Neighbor (kNN) models. The results show that the developed IWQP4Net achieved a promising outcome and better performance than the other comparative models.
Cybersecurity in the Internet of Things (IoT) ecosystem is vital to protect sensitive data, stop unauthorized access, and mitigate the risk of disruptive cyberattacks. Mitigating risks in IoT devices and networks through encryption, authentication protocols, and continuous monitoring is paramount to ensure the privacy, reliability, and entire safety of connected systems, raising the wide support and success of IoT technologies. Cyberattack recognition utilizing an intrusion detection system (IDS) is a major imperative given the increase in the number of connected devices. Advanced cybersecurity methods deploy machine learning (ML) approaches, anomaly detection, and behavioral analysis to analyze IoT network traffic for irregular patterns indicative of potential cyberattacks. The combination of feature selection (FS) and deep learning (DL) approaches in cyberattack recognition suggests a proactive and sophisticated manner to bolster cybersecurity. Leveraging DL structures like neural networks (NNs) assists the automatic extraction and analysis of intricate patterns in the difficult IoT data landscape. This synergy develops the accuracy and performance of cyberattack recognition, as the system learns to detect normal device behavior from anomalies. This paper develops an Improved Mayfly Optimization Algorithm with a Hybrid Deep Learning based Intrusion Detection (IMFOHDL-ID) approach in IoT environments. The designed IMFOHDL-ID approach’s main goal is to classify intrusions and accomplish security in the IoT environment. The IMFOHDL-ID technique initially follows data normalization as a preprocessing stage. In addition, the IMFOHDL-ID technique makes use of the IMFO-based feature selection (FS) method to elect feature subsets. For IDs, the IMFOHDL-ID technique applies the Long Short Term Memory based Deep Stacked Sequence-to-Sequence Autoencoder (LSTM-DSSAE) model. Finally, the dipper-throated optimization algorithm (DTOA) was utilized for optimal hyperparameter selection of the LSTM-DSSAE method. To highlight better results of the IMFOHDL-ID model, a series of simulation analyses were performed. Extensive comparative results stated the improved outcome of the IMFOHDL-ID technique over existing approaches.
Malware is a malicious software intended to cause damage to computer systems. In recent times, significant proliferation of malware utilized for illegal and malicious goals has been recorded. Several machine and deep learning methods are widely used for the detection and classification of malwares. Image-based malware detection includes the usage of machine learning and computer vision models for analyzing the visual representation of malware, including binary images or screenshots, for the purpose of detecting malicious behaviors. This techniques provides the potential to identify previously hidden or polymorphic malware variants based on the visual features, which provide a further layer of defense against emerging cyber-attacks. This study introduces a new Snake Optimization Algorithm with Deep Convolutional Neural Network for Image-Based Malware Classification technique. The primary intention of the proposed technique is to apply a hyperparameter-tuned deep learning method for identifying and classifying malware images. Primarily, the ShuffleNet method is mainly used to derivate the feature vectors. Besides, the snake optimization algorithm can be deployed to boost the choice of hyperparameters for the ShuffleNet algorithm. For the recognition and classification of malware images, attention-based bi-directional long short-term memory model. The simulation evaluation of the proposed algorithm has been examined using the Malimg malware dataset. The experimental values inferred that the proposed methodology achieves promising performance with a maximum accuracy of 98.42% compared to existing models.