Xifeng Lv

Dr. Xifeng Lv

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 September 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
XLXifeng Lv
Xifeng Lv
YZYishi Zhang
Yishi Zhang
Xiaodong WangXiaodong Wang
Xiaodong Wang
LHLibing Hu
Libing Hu
CSChunhui Shi
Chunhui Shi
To address the performance deterioration of ZIF-8 for the adsorption of copper ions caused by powder volume pressure and particle aggregation, we employed multilayer graphene oxide (MGO) as a support to prepare composite adsorbents (MGO@ZIF-8) by using the in situ growth of ZIF-8 on MGO. Due to a good interfacial compatibility and affinity between ZIF-8 and graphene nanosheets, the MGO@ZIF-8 was successfully prepared. The optimal Cu2+ adsorption conditions of MGO@ZIF-8 were obtained through single factor experiments and orthogonal experiments. Surprisingly, the Cu2+ adsorption capacity was significantly improved by the integration of MGO and ZIF-8, and the maximum Cu2+ adsorption capacity of MGO@ZIF-8 reached 431.63 mg/g under the optimal adsorption conditions. Furthermore, the kinetic fitting and isotherm curve fitting confirmed that the adsorption law of Cu2+ by MGO@ZIF-8 was the pseudo-second-order kinetic model and the Langmuir isotherm model, which indicated that the process of Cu2+ adsorption was monolayer chemisorption. This work provides a new approach for designing and constructing ZIF-8 composites, and also offers an efficient means for the removal of heavy metals.

24 May 2023 in Solar Energy Materials and Solar Cells
Verified
Journal Article
Closed access
XLXifeng Lv
Xifeng Lv
TTTianwei Tan
Tianwei Tan
DCDi Cai
Di Cai
XZXiqin Zhou
Xiqin Zhou
GLGuohua Li
Guohua Li
HCHui Cao
Hui Cao

8 May 2022 in Materials
Verified
Journal Article
Open access
PDF file
XLXifeng Lv
Xifeng Lv
XSXuehua Shen
Xuehua Shen
LZLuxiang Zhang
Luxiang Zhang
YWYazhou Wang
Yazhou Wang
FWFang Wang
Fang Wang
The serious phase separation in inorganic phase change materials, and easy leakage of organic phase change materials are the main obstacles to the practical batch application of phase change heat storage materials. To solve these problems, in this work, emulsion polymerization is introduced as the method for preparing organic-inorganic coupling phase change material (oic-PCM) with high heat storage performance using polyacrylamide (PAM) as the wall material and organic phase change material of cetyl alcohol as the core material, and diatomite is used as a supporting substrate to absorb inorganic sodium sulfate decahydrate (SSD). A differential scanning calorimeter (DSC), X-ray diffractometer (XRD), dust morphology and dispersion analyzer, and thermal conductivity tester were used to characterize the prepared organic-inorganic coupled phase change materials and investigate their performance. The research results show that when the mass fraction of cetyl alcohol is 68.97%, the mass fraction of emulsifier is 3.38%, and the mass fraction of sodium sulfate decahydrate/diatomite is 3.40%. The phase change latent heat of the organic-inorganic coupled phase change material is as high as 164.13 J/g, and the thermal conductivity reaches up to 0.2061 W/(m·k), which proves that the prepared organic-inorganic coupled phase change material has good heat storage performance, showing its good application prospects.

7 September 2023 in Materials
Verified
Journal Article
Open access
PDF file
XLXifeng Lv
Xifeng Lv
CFChaoqun Fan
Chaoqun Fan
YHYing Han
Ying Han
XTXiaojin Tang
Xiaojin Tang
CZChangwei Zhang
Changwei Zhang
HCHuidong Chen
Huidong Chen
Aiming to promote the application of D-mannitol in the field of phase change thermal storage, obstacles, including low thermal storage efficiency and high supercooling, should be properly disposed of. The adoption of adaptable and low-cost supporting materials to make shape-stable phase change materials (ss-PCMs) affordable is a primary solution to solve the above shortcomings. In this study, high-performance ss-PCM for effective medium-temperature heat storage was prepared using expanded vermiculite as the support for D-mannitol preservation. Among the three candidates that treated the raw vermiculite by dilute acid, calcination, and microwave heating, the calcinated expanded vermiculite (CV) was characterized as the most suitable one. After impregnating D-mannitol into the CV carrier by vacuum, a melting enthalpy of 205.1 J/g and a crystallization enthalpy of 174.1 J/g were achieved by the as-received CV/D-mannitol ss-PCM. Additionally, the supercooling of the ss-PCM was reduced to 45.6 °C. The novel CV/D-mannitol ss-PCM also exhibited excellent reusability and stability. All the findings indicate that the abundant and inexpensive CV exhibited great potential as the supporting material for D-mannitol-based ss-PCMs, which allow effective waste heat recovery and temperature regulation.

29 January 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
XLXifeng Lv
Xifeng Lv
HCHuan Cao
Huan Cao
RZRui Zhang
Rui Zhang
XSXuehua Shen
Xuehua Shen
Xiaodong WangXiaodong Wang
Xiaodong Wang
FWFang Wang
Fang Wang
The research on the high-value utilization of biomass has good application prospects and is conducive to sustainable development. In this paper, three different types of activators (potassium hydroxide, phosphoric acid, and polypropylene) were used to carbonize jujube branches at high temperatures of 600 °C and 800 °C, and then the PEG/jujube charcoal composite phase change materials (PCM) were prepared by vacuum impregnation of polyethylene glycol (PEG). The results showed that the carbon support activated by polypropylene (PP) had a richer pore size distribution than the other two activation methods, and the 800 °C carbonization carrier loaded PEG had a higher phase change enthalpy than the composite material at 600 °C. The mesoporous and macroporous structures were staggered with PP-activated jujube charcoal at 800 °C, with a specific surface area of 1082.2 m²/g, the melting enthalpy of the composite material reached 114.92 J/g, and the enthalpy of solidification reached 106.15 J/g after PEG loading. The diffraction peak of the composite phase change material was the superposition of PEG and carbon matrix, which proved that the loading process was physical adsorption. After 200 thermal cycles, the melting enthalpy and crystallization enthalpy were only reduced by 4.3% and 4.1%, respectively, and they remained stable and leak-free at the melting point of PEG for 2 h, demonstrating good thermal stability of the composite phase change materials. In summary, PP has obvious advantages over traditional activation, and the carbon-supported PEG phase change composite after PP activation is a biochar energy storage material with excellent performance.

13 January 2026 in RSC Advances
Verified
Journal Article
Open access
PDF file
XZXuejian Zhou
Xuejian Zhou
YYYufei Yang
Yufei Yang
RYRuiqi Yang
Ruiqi Yang
LSLei Shi
Lei Shi
LZLing Zhou
Ling Zhou
XLXifeng Lv
Xifeng Lv
This study aims to address the limitations of existing adsorbents in treating copper(II)-containing wastewater by developing a high-performance and highly practical adsorbent. A chitosan-EDTA bifunctional modified magnetic walnut shell biochar (E-CMBC) was synthesized via a three-step method: magnetic modification of walnut shell biochar with Fe3O4 nanoparticles, surface coating with chitosan, and grafting of EDTA via amide bond coupling. The physicochemical properties of E-CMBC were characterized using field emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) analysis, Thermogravimetric (TGA) analysis and zeta potential measurement, and its adsorption performance for copper(II) was systematically evaluated through batch experiments. Key results demonstrate that the maximum adsorption capacity of E-CMBC for copper(II) reaches 130.8 mg g−1, with 52.4% of the equilibrium capacity achieved within 15 min; the adsorption process conforms to the pseudo-second-order kinetic model and the Langmuir isotherm model, confirming that chemical chelation is the dominant mechanism, and thermodynamic analysis indicates that the adsorption process is spontaneous and endothermic, with entropy increase serving as the primary driving force. Notably, E-CMBC maintains high adsorption efficiency within the pH range of 3–5, exhibits strong selectivity against coexisting ions (Na+, K+, Ca2+, Mg2+), enables rapid magnetic separation within seconds, and retains 91.13% of its initial adsorption capacity after five adsorption–desorption cycles. By integrating the combined advantages of EDTA (high selectivity), chitosan (abundant complexation sites), and magnetic biochar (easy separation), this study fills the gaps in existing literature and provides an efficient, sustainable, and engineering-applicable solution for heavy metal pollution control and high-value utilization of agricultural waste.