An algorithm for self-tuning the PID controller to the second order systems is proposed in this paper. The proposed self-tuning procedure was developed according to the maximum stability degree criterion, the criterion that permits to achieve the high stability degree, good performance and robustness of the system. According to the proposed algorithm, the controller can be tuned according to the parameters that characterize the process and they can be determinate from the experimental response of the open loop system. To demonstrate the efficiency of proposed procedure of self-tuning the PID controller, the computer simulation was performed and the obtained results were compared with Haeri’s method, maximum stability degree method with iterations and parametrical optimization method. According to the developed algorithm, it was performed the control of the thermal regime in the oven.
In this paper, there have been synthesized the control algorithms in cascade control systems. The control object is the robotic arm which is actuated by a servo motor presented as an automatic cascade control system which is consisting of two loops. The use of multiple loops is justified by the fact that with a single loop, only one parameter of the servo motor is controlled, which leads to a decrease in the reliability of the automatic system. A case study was carried out for a direct current electric motor, where proportional (P), proportional-integral (PI), and proportional-integral-derivative (PID) control algorithms were used, with P and PI applied to the inner loop, and P, PI, and PID to the outer loop. The system was simulated with the synthesized algorithms and the results were analyzed, it was established that the system has robustness and high performance for the case of using maximum stability degree method with iterations.
The paper presents the procedure for tuning the PID control algorithm to the object model with secondorder inertia with identical elements and time delay according to the modified polynomial method. Methods that can be applied for tuning the PID control algorithm to this control object model are analyzed. The modified polynomial method of tuning the PID algorithm to the second-order inertial control object model with identical elements and time delay is developed, which presents as a simple procedure. To compare the obtained results, tuning methods are applied: the maximum stability degree method in analitycal form and with iterations, Ziegler-Nichols method and parametrical optimization of the PID controller to the model of the given object. The tuning algorithm according to the method of the maximum degree of stability with iterations and the modified polynomial method is synthesized for an example of the object model with secondorder inertia with identical elements and time delay, and the results obtained for the variation of the object model parameters are analyzed. The advantages of the maximum stability degree methods with iterations and modified polynomial are highlighted.
The paper presents the procedure for tuning the PID controller to the object model with second-order inertia and time delay according to the method of the maximum degree of stability with iterations and the modified polynomial method. In industrial process automation, mathematical models attached to slow and very slow processes are approximated by mathematical model with second-order inertia and time delay. The modified polynomial method of tuning the PID algorithm to the control object model with first-order inertia and time delay is developed, which presents a simple procedure. To compare the obtained results, the method of the maximum degree of stability with iterations, the Ziegler-Nichols method of tuning the PID controller to the object model with second-order inertia and time delay is applied. Examples are examined and the results obtained when varying the parameters of the object model are analyzed. The advantages of the maximum degree of stability method with iterations and modified polynomial method are highlighted.
This paper presents an approach for control-relevant identification of inertial systems with time delay. The experimental identification was conducted in closed-loop, and the control object is approximated by a first-order inertial transfer function with time delay. The coefficients were determined using simple analytical expressions based on values obtained from the undamped step response of the closed-loop system with a P controller. This study enhances the understanding of closed-loop experimental identification of inertial systems with time delay and offers effective strategies for synthesizing the PID control algorithm. The obtained results are validated through computer simulation using the MATLAB software package. The results confirm that the proposed identification method for first-order inertial systems provides accurate model estimation and that the control algorithm delivers good system performance.