This study presents three distributed beamforming algorithms to address the challenges of positioning and signal phase errors in unmanned aerial vehicle (UAV) arrays that hinder effective beamforming. Firstly, the array’s received signal phase error model was analyzed under near-field conditions. In the absence of navigation data, a beamforming algorithm based on the Extended Kalman Filter (EKF) was proposed. In cases where navigation data were available, Taylor expansion was utilized to simplify the model, the non-Gaussian noise of the compensated received signal phase was approximated to Gaussian noise, and the noise covariance matrix in the Kalman Filter (KF) was estimated. Then, a beamforming algorithm based on KF was developed. To further estimate the Gaussian noise distribution of the received signal phase, the noise covariance matrix was iteratively estimated using unscented transformation (UT), and here, a beamforming algorithm based on the Unscented Kalman Filter (UKF) was proposed. The proposed algorithms were validated through simulations, illustrating their ability to suppress the malign effects of errors on near-field UAV array beamforming. This study provides a reference for the implementation of UAV array beamforming under varying conditions.
The target of an unmanned aerial vehicle swarm will present near-field characteristics when it is integrated as an array, and the existence of the unmanned aerial vehicle swarm motion error will greatly deteriorate the beam pattern formed by the array. To solve these problems, a near-field array beamforming model with array element position error is constructed, and the Taylor expansion of the phase difference function is used to approximately simplify the model. The improved Newton maximum entropy algorithm is proposed to estimate and compensate for the phase errors. The maximum entropy objective function is established, and the Newton iterative algorithm is used to estimate the phase error iteratively. To select the proper Newton iteration initial value, based on a single reference source signal, the initial value of the phase error is estimated through the phase gradient information of the received array signal. Beamforming is carried out after phase error compensation regarding the array. In order to assess the mismatch of the phase error compensation function based on the proposed method, when the beam is scanning, the effectively compensated spatial area of the array beamforming is divided, which lays a foundation for subsequent spatial region division and unmanned aerial vehicle swarm path planning. The simulation results show that the beam formed by the method proposed in this paper has a lower sidelobe level, and as the signal-to-noise ratio changes, the robustness of the proposed method is better validated. The proposed algorithm can effectively suppress the adverse influence of array element position error on array beamforming, and when the beam is scanning, the effectively compensated area of the phase error compensation function is divided, based on the proposed method.
To address the challenge of recognizing Active Electronically Scanned Arrays (AESA) radar work modes under few labeled data, this paper proposes a semi-supervised algorithm based on multi-task contrastive learning. The method employs a dual-stage collaborative optimization framework combining self-supervised pre-training and supervised fine-tuning to effectively leverage latent feature information from unlabeled data. In the self-supervised pre-training stage, a dual-path data augmentation strategy is designed to generate mode-consistent pulse sequence samples, where an expander and a base encoder work synergistically to capture both temporal dependencies and cross-pulse deep correlation features. Additionally, three self-supervised tasks—contextual contrastive learning, pulse sequence reconstruction, and augmentation feature prediction—are introduced to optimize feature space distribution, disentangle noise interference, and enforce consistency constraints across augmented samples, respectively. During the supervised fine-tuning stage, a classifier integrates self-supervised representations with few labeled data to enhance recognition performance. Comparative experiments demonstrate that the proposed algorithm achieves significantly higher recognition accuracy on the AESA radar work mode dataset compared to other mainstream semi-supervised methods under few labeled conditions. Ablation studies validate the strengthening effect of the multi-task collaborative mechanism on model performance. Additionally, data augmentation comparison experiments identify the optimal augmentation strategy for this algorithm.