Radiochromic films (RCF) are commonly used in dosimetry for a wide range of radiation sources (electrons, protons, and photons) for medical, industrial, and scientific applications. They are multi-layered, which includes plastic substrate layers and sensitive layers that incorporate a radiation-sensitive dye. Quantitative dose can be retrieved by digitizing the film, provided that a prior calibration exists. Here, to calibrate the newly developed EBT3 and HDv2 RCFs from Gafchromic™, we used the Stanford Medical LINAC to deposit in the films various doses of 10 MeV photons, and by scanning the films using three independent EPSON Precision 2450 scanners, three independent EPSON V750 scanners, and two independent EPSON 11000XL scanners. The films were scanned in separate RGB channels, as well as in black and white, and film orientation was varied. We found that the green channel of the RGB scan and the grayscale channel are in fact quite consistent over the different models of the scanner, although this comes at the cost of a reduction in sensitivity (by a factor ∼2.5 compared to the red channel). To allow any user to extend the absolute calibration reported here to any other scanner, we furthermore provide a calibration curve of the EPSON 2450 scanner based on absolutely calibrated, commercially available, optical density filters.
Multi-MeV proton beams can be generated by irradiating thin solid foils with ultra-intense (>1018 W/cm2) short laser pulses. Several of their characteristics, such as high bunch charge and short pulse duration, make them a complementary alternative to conventional radio frequency-based accelerators. A potential material science application is the chemical analysis of cultural heritage (CH) artifacts. The complete chemistry of the bulk material (ceramics, metals) can be retrieved through sophisticated nuclear techniques such as particle-induced X-ray emission (PIXE). Recently, the use of laser-generated proton beams was introduced as diagnostics in material science (laser-PIXE or laser-driven PIXE): Coupling laser-generated proton sources to conventional beam steering devices successfully enhances the capture and transport of the laser-accelerated beam. This leads to a reduction of the high divergence and broad energy spread at the source. The design of our hybrid beamline is composed of an energy selector, followed by permanent quadrupole magnets aiming for better control and manipulation of the final proton beam parameters. This allows tailoring both, mean proton energy and spot sizes, yet keeping the system compact. We performed a theoretical study optimizing a beamline for laser-PIXE applications. Our design enables monochromatizing the beam and shaping its final spot size. We obtain spot sizes ranging between a fraction of mm up to cm scale at a fraction of nC proton charge per shot. These results pave the way for a versatile and tunable laser-PIXE at a multi-Hz repetition rate using modern commercially available laser systems.
The exact solution of the Liouville equation expressed in terms of exponential operators can describe the phase space evolution of particle beams in transport lines. In this paper, we generalize the solution of the above equation for the case of beam losses induced by apertures and for particle beams with large spreads in the momentum space. We discuss the applicability of such approach to ion beams produced by high-intensity lasers interacting with critical plasmas, based on the comparison between theoretical findings and measurements.
4 October 2024 in IEEE Transactions on Instrumentation and Measurement
Laser-driven proton sources are attracting increasing interest because of their promising uses in several fields, from basic science to materials analysis. Applications require quantitative and accurate measurements of the laser-driven particle spectra. However, the peculiar features of these sources pose several challenges to their in-depth characterization. In this work, we present the design of a spectrometer based on silicon photodiodes, focusing on TW-class laser proton sources and their foreseen applications. The device comprises a dipole magnet to deflect the ions along different trajectories according to their energies. The magnet can also be removed to avoid beam deflection and make the particles available for applications. We exploit a finely shaped differential filter to cut the contribution of unwanted heavy ions and a photodiode array for proton detection. These elements are described and experimentally characterized, allowing the development of an analytical description useful to size the instrument. We perform Monte Carlo simulations to validate the model and calibrate the system. The retrieved data are used to simulate the detection of protons in a typical laser-driven particle acceleration experiment. The spectrum reconstructed by Monte Carlo simulations wellmatches the distribution provided as source, demonstrating the founding principles of the spectrometer. Lastly, a first test in a real laser environment at Centro de Láseres Pulsados (1 PW VEGA-3 laser) is also presented, showing the full response of the device and its potential as a laser-driven proton beam monitor in application-oriented scenarios.
The characterization of the phase space of laser-driven proton beams—particularly across a broad energy spectrum—in spite of the recent interest in laser-driven particle accelerators, remains a significant challenge due to the complex interplay between transverse dynamics and spectral properties. This work presents a detailed spectral study of the lateral emittance of laser-driven proton beams, providing energy-resolved, single-shot measurements of the beam emittance by means of a magnetically streaked pepper-pot method. Experimental results from a laser-driven proton source demonstrate the ability to resolve the beam’s transverse trace space at various proton energies, yielding precise emittance estimations and highlighting the variation of beam quality with energy. The study emphasizes the necessity of high spectral resolution for accurate emittance characterization. The findings offer valuable implications for optimizing beamline design and improving the performance of future tabletop laser accelerators.