The strong radioactivity of iodine compounds derived from nuclear power plant wastes has motivated the development of highly efficient adsorbents. Porous aromatic frameworks (PAFs) have attracted much attention due to their low density and diverse structure. In this work, an azo group containing PAF solid, denoted as LNU-58, was prepared through Suzuki polymerization of tris-(4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-phenyl)-amine and 3,5-dibromoazobenzene building monomers. Based on the specific polarity properities of the azo groups, the electron-rich aromatic fragments in the hierarchical architecture efficiently capture iodine molecules with an adsorption capacity of 3533.11 mg g⁻¹ (353 wt%) for gaseous iodine and 903.6 mg g⁻¹ (90 wt%) for dissolved iodine. The iodine uptake per specific surface area up to 8.55 wt% m⁻² g⁻¹ achieves the highest level among all porous adsorbents. This work illustrates the successful preparation of a new type of porous adsorbent that is expected to be applied in the field of practical iodine adsorption.

Eating vegetables with pesticide residues over a long period of time causes serious adverse effects on the human body, such as acute poisoning, chronic poisoning, and endocrine system interference. To achieve the goal of a healthy society, it is an urgent issue to find a simple and effective method to detect organic pesticides. In this work, two fluorescent porous organic polymers, LNU-45 and LNU-47 (abbreviation for Liaoning University), were prepared using π-conjugated dibromopyrene monomer and boronic acid compounds as building units through a Suzuki coupling reaction. Due to the large π-electron delocalization effect, the resulting polymers revealed enhanced fluorescence performance. Significantly, in sharp contrast with the planar π-conjugated polymer framework (LNU-47), the distorted conjugated structure (LNU-45) shows a higher specific surface area and provides a broad interface for analyte interaction, which is helpful to achieve rapid response and detection sensitivity. LNU-45 exhibits strong fluorescence emission at 469 nm after excitation at 365 nm in THF solution, providing strong evidence for its suitability as a luminescent chemosensor for organic pesticides. The fluorescence quenching coefficients of LNU-45 for trifluralin and dicloran were 5710 and 12,000 (LNU-47 sample by ca. 1.98 and 3.38 times), respectively. Therefore, LNU-45 serves as an effective “real-time” sensor for the detection of trifluralin and dicloran with high sensitivity and selectivity.

Ultramicropores (size < 0.7 nm) are critically demanded to provide an efficient path for the penetration and transportation of electrolytes to achieve high-performance supercapacitors. Here, a self-sacrificial template approach is adopted, which introduces C8 alkyl chains with a kinetic diameter of 0.8–1 nm to occupy the cavity of a porous aromatic framework (PAF). During the heating process, the alkyl chains decompose from the dense architecture as the temperature increased from 500 to 600 °C, forming ∼1 nm micropores. The newly-obtained cavities provide sites for thermal-driven skeleton engineering (700–900 °C) to obtain ultramicropores. Based on the well-defined pore structure, the carbonized PAF solid revealed outstanding electrochemical performances, including high rate and long-term stability in a 6 M KOH electrolyte. Notably, the specific capacitance (294 F g⁻¹) derived from the self-sacrificial template method exceeds the capability of all the other methods for the construction of ultramicropores including self-template strategy, carbonization of nanoparticles, and template-assisted strategy. The synthesis of ultramicroporous carbons via the self-sacrificial template route opens up a promising gate to adjust the porous structure for high-performance applications in supercapacitors.

Nitrogen-rich porous networks with additional polarity and basicity may serve as effective adsorbents for the Lewis electron pairing of iodine molecules. Herein a carbazole-functionalized porous aromatic framework (PAF) was synthesized through a Sonogashira–Hagihara cross-coupling polymerization of 1,3,5-triethynylbenzene and 2,7-dibromocarbazole building monomers. The resulting solid with a high nitrogen content incorporated the Lewis electron pairing effect into a π-conjugated nano-cavity, leading to an ultrahigh binding capability for iodine molecules. The iodine uptake per specific surface area was ~8 mg m⁻² which achieved the highest level among all reported I₂ adsorbents, surpassing that of the pure biphenyl-based PAF sample by ca. 30 times. Our study illustrated a new possibility for introducing electron-rich building units into the design and synthesis of porous adsorbents for effective capture and removal of volatile iodine from nuclear waste and leakage.

In this study, a porous aromatic framework (PAF) material (LNU-18) with two kinds of nitrogen atoms (N_triazine and N_amine) was prepared via a Suzuki coupling reaction. After carbonization at 700, 800, and 900 °C, there is no obvious change in the morphology of the samples compared with their precursor accompanied by an enlargement in the surface area. Evaluated in an alkali environment (6 M KOH), LNU-18-800 as the electrode material reached a maximum specific capacitance of 269 F g⁻¹ at a current density of 0.5 A g⁻¹. To reveal their excellent electrochemical properties, PAF-48, with a similar theoretical structure to LNU-18 but with the whole carbon skeleton being carbonized, shows a capacitance of 54 F g⁻¹, which is ca. four times lower than that of LNU-18-800. This is because the strong covalent bonds in the porous aromatic framework will maintain the chemical structure of N atoms, and the customized nitrogen atoms (N_triazine and N_amine) in porous carbons enhance the capability to function as high-performance supercapacitors. This study demonstrates that porous aromatic frameworks as precursors will generate the special N atoms for further investigation of porous carbon electrodes.

Radioiodine (¹²⁹I and ¹³¹I) emission from the nuclear waste stream has aroused enormous apprehension because of its quick diffusion and radiological contamination. Conventional porous adsorbents such as zeolites and carbon with rigid skeletons and constant pore volumes reveal a limited performance for reliable storage. Here, a series of soft porous aromatic frameworks (PAFs) with additional π-conjugated fragments is disclosed to serve as physicochemical stable media. Due to the flexibility of the tertiary amine center, the PAF products provide sufficient space for the binding sites, and thus exhibit a considerable capability for iodine capture from both gaseous and soluble environments. The obtained capacity of PAFs is ca. 1.6 times higher than that of PAF-1 which possesses similar aromatic constituents featuring an ultra-large specific surface area (BET = 5600 m² g⁻¹). The novel paradigm of dynamic frameworks is of fundamental importance for designing adsorbents to treat environmental pollution issues.