Nowadays, patchouli oil extraction in Indonesia is generally carried out using conventional methods, although such methods require large amounts of energy, solvents in significant amounts, and quite a long time.
The implementation of this research consists of 2 (two) aspects: the making and testing of bio-briquettes called technological aspects and economic analysis called economic aspects. Bio-briquettes is made from cashew nutshell waste obtained from Southeast Sulawesi, Indonesia. It is followed by pyrolysis, which is carried out in a simple batch type reactor by heating using liquefied petroleum gas (LPG). The bio-briquettes product has a calorific value of 29.49 MJ/kg, moisture content of 5.3%, ash content of 4.96%, volatile substances content of 17.16%, and carbon content of 72.62%, which meets the universally accepted bio-briquettes standard (SNI 016235-2000), Japanese, English and ISO 17225. The bio-briquettes product is suitable as an energy source. The economic analysis of the cashew nutshell was analyzed to determine its economic feasibility. For the bio-briquettes production capacity in 2,000 tons/year, cashew nut shell-briquettes products can be sold at 1,052,878 USD/year. The total production cost is USD842,304/year. The net profit is of USD147,402/year. The cost of LPG for 2,000 tons/year production capacity is USD954,358/years. The replacement of LPG with cashew seed bio-briquettes tends to help the average household of Muna Regency community to reduce the annual cost by 37.00%. In conclusion, bio-briquettes production's economic feasibility as analyzed from the investment rate is 23.55%, payout time is 3.42 years, and break-even point is 50.09%.
Fossil fuel is the main energy resource in Indonesia with oil as the dominant fuel (44.1% of primary energy consumption) in 2017. But fossil fuel is not environmentally friendly and non-renewable. Thus, there is a need for alternative renewable fuels such as biodiesel. Biodiesel from nyamplung (Calophyllum inophyllum L.) oil can provide a promising future as a renewable fuel resource. The used of CaO catalyst from eggshell waste is also profitable, and microwave radiation can help the biodiesel production process run more effectively. Optimization of parameters such as microwave power, catalyst concentration, and transesterification time was performed by using Box-Behnken design. Combinations between biodiesel production from nyamplung oil with CaO catalyst using microwave and treated with Box-Behnken design is considered a new and modern method with optimization of the parameters which affect the transesterification process. The result showed that at a microwave power of 325.24 W, a concentration of catalyst of 3.88%, and a transesterification time of 12.47 min can produce an optimal yield of biodiesel of 98.9079% with the reliability of 92.37%.
The increasing demand of non-toxic and environmentally friendly dyes, colorants that come from natural source have risen as an alternative of sintetic poisonous dyes. In this research natural dye from S. mahagony was extracted using microwave-assisted extraction method under different operating condition such as extraction time (10-30min), plant material to solvent ratio (0.03-0.05g/mL) and microwave power level (100-380 watt). Box-Behnken method and central composite design (CCD) method is widely used for modeling response surface methodology (RSM), both methods show good prediction performance. In this study response surface methodology was performed to optimize the process, both methods were performed by the help Statgraphics Centurion 16 to evaluate the effects of different operating parameters. Finally, both methods were statistically compared by root mean square error (RMSE) and absolute average deviation (AAD) based on validation data set. Further, result suggests that CCD has better performance as compared to Box-Behnken method. The maximum yield obtained for Box-Behnken is 3.7647% (380 watt, 0.0339g/mL, 28.8899min) and 3.7506% (379.986 watt, 0.0378g/mL, 30min) for central composite design method.