Chen Li

Dr. Chen Li

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 July 2022 in Micromachines
Verified
Journal Article
Open access
PDF file
MYMu Yuan
Mu Yuan
CLChen Li
Chen Li
JGJiangqin Ge
Jiangqin Ge
QXQingduo Xu
Qingduo Xu
ZLZhian Li
Zhian Li
Microjets caused by the cavitation effect in microchannels can affect the motion trajectory of solid particles in microchannels under ultrasonic conditions. The optimal parameters for an observation experiment were obtained through simulations, and an experiment was designed to verify these parameters. When the cavitation bubbles collapse in the near-wall area, the solid particles in the microchannel can be displaced along the expected motion trajectory. Using fluent software to simulate the bubble collapse process, it can be seen that, when an ultrasonic sound pressure acts on a bubble near the wall, the pressure causes the top of the bubble wall to sink inward and eventually penetrate the bottom of the bubble wall, forming a high-speed microjet. The maximum speed of the jet can reach nearly 28 m/s, and the liquid near the top of the bubble also moves at a high speed, driving the particles in the liquid towards the wall. A high-speed camera was used to observe the ultrasonic cavitation process of bubbles in the water to verify the simulation results. A comparison of particle motion with and without ultrasonic waves proved the feasibility of using the ultrasonic cavitation effect to guide small particles towards the wall. This method provides a novel experimental basis for changing the fluid layer state in the microchannel and improving precision machining.

2 April 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
CLChen Li
Chen Li
垠卢垠旭 卢
垠旭 卢
YBYong BIAN
Yong BIAN
JTJie Tian
Jie Tian
MYMu Yuan
Mu Yuan
The quality and safety of agricultural products involve a variety of risk factors, a large amount of risk information data, and multiple circulation and disposal processes, making it difficult to accurately trace the source of risks. To achieve precise traceability of agricultural product quality and safety, the monitoring and supervision level of agricultural product traceability systems needs to be improved. In this paper, the agricultural product quality- and safety-related detection data are taken as the research object, the agricultural product supply chain and business process are sorted out, the agricultural product risk factors under the influence of heavy metals are analyzed, and the agricultural product quality and safety risk evaluation model is established. The agricultural product risk traceability system was designed based on the six-layer architecture of the equipment layer, data layer, service layer, application layer, display layer, and user layer. Combined with the agricultural product quality and safety risk evaluation model, the system data were stored and modified by using the MySQL relational database, and the agricultural product risk traceability system was developed, which realized the accurate traceability of the risk link of the quality and safety of agricultural products. The research results of this paper provide an effective information means for the quality and safety supervision of agricultural products, and provide a technical reference for the development of a traceability system of risk factors related to agricultural products, which has good practical significance.

26 May 2023 in Micromachines
Verified
Journal Article
Open access
PDF file
XWxiaoxing weng
xiaoxing weng
CLChen Li
Chen Li
CCChangqing Chen
Changqing Chen
GWGang Wang
Gang Wang
CXChenghao Xia
Chenghao Xia
LZLianyou Zheng
Lianyou Zheng
Aiming at the problem of how to achieve the rapid detection of pathogenic microorganisms, this paper takes tobacco ringspot virus as the detection object, designs the impedance detection and analysis platform of tobacco ringspot virus based on microfluidic impedance method, establishes an equivalent circuit model to analyze the experimental results, and determines the optimal detection frequency of tobacco ringspot virus detection. Based on this frequency, an impedance–concentration regression model was established for the detection of tobacco ringspot virus in a tobacco ringspot virus detection device. Based on this model, a tobacco ringspot virus detection device was designed by using an AD5933 impedance detection chip. A comprehensive test study was carried out on the developed tobacco ringspot virus detection device through various testing methods, which verified the feasibility of the tobacco ringspot virus detection device and provided technical support for the field detection of pathogenic microorganisms.

18 October 2022 in Micromachines
Verified
Journal Article
Open access
PDF file
CLChen Li
Chen Li
BYBo Ye
Bo Ye
YXYongxin Xi
Yongxin Xi
MYMu Yuan
Mu Yuan
A microfluidic impedance sensor embedded with gold interdigitated array microelectrodes was utilized to rapidly detect Tomato Ringspot Virus (ToRSV) and achieve efficient and precise detection. The electrochemical impedance spectrum was obtained by immobilizing ToRSV antibody on the surface of a gold interdigital array microelectrode and mixing it with ToRSV to generate an impedance change. The electrochemical impedance spectrum was obtained. The equivalent circuit was established to analyze the mechanism of impedance change, and the quantitative linear relationship between ToRSV concentration and impedance was established. According to an equivalent circuit analysis, ToRSV increases the solution resistance Rs, the electron transfer resistance Ret on the electrode surface, and the double layer capacitance Cdl, resulting in an increase in impedance. The results reveal that the ToRSV concentration detected in the range of 0.001 to 10 μg/mL ranges from 248.8 to 687.2 kΩ at the ideal detection frequency of 10.7 Hz, with a good linear connection, R2 = 0.98. When this method’s detection limit is tested, the impedance value is 367.68 kΩ. 0.0032 μg/mL was the detection limit. The sensor is quick and easy to use, has high detection sensitivity, and can be used to detect other plant viruses.

11 September 2020 in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
Verified
Journal Article
Closed access
PDF file
CLChen Li
Chen Li
CLChen Li
Chen Li
JGJiangqin Ge
Jiangqin Ge
LGLiming Guo
Liming Guo
SWShuang Wei
Shuang Wei
In this study, a calculation model was proposed to predict the motion locus of particles moving to a wall in boundary layers. The velocity of soft abrasive flow and the incident angle of the particles were obtained based on the results calculated by the mixture model and realizable k–ε model. After the model formed, the distributions of the dynamic pressure and the volume fraction of abrasive particles were analyzed and compared to experimental results. After analysis, it was found that the amount of removed material is positively correlated with the incident velocity and the volume fraction of abrasive particles, as well as the dynamic pressure on the surface of the workpiece. In addition, the comparison shows that the numerical simulation method is feasible to predict the flow field and effect of soft abrasive flow. In addition, it was found that the simulation results are consistent with the flow field distribution and machining effect. Therefore, this model can be used in design of constrained modules.

12 January 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ZLZhian Li
Zhian Li
XLXiao Li
Xiao Li
CLChen Li
Chen Li
JGJiangqin Ge
Jiangqin Ge
YQYi Qiu
Yi Qiu
The reliability analysis system is currently evolving, and reliability analysis efforts are also focusing more on correctness and efficiency. The effectiveness of the active learning Kriging metamodel for the investigation of structural system reliability has been demonstrated. In order to effectively predict failure probability, a semi-parallel active learning method based on Kriging (SPAK) is developed in this study. The process creates a novel learning function called UA, which takes the correlation between training points and samples into account. The UA function has been developed from the U function but is distinct from it. The UA function improves the original U function, which pays too much attention to the area near the threshold and the accuracy of the surrogate model is improved. The semi-parallel learning method is then put forth, and it works since UA and U functions are correlated. One or two training points will be added sparingly during the model learning iteration. It effectively lowers the required training points and iteration durations and increases the effectiveness of model building. Finally, three numerical examples and one engineering application are carried out to show the precision and effectiveness of the suggested method. In application, evaluation efficiency is increased by at least 14.5% and iteration efficiency increased by 35.7%. It can be found that the proposed algorithm is valuable for engineering applications.