Cooling towers play a vital role in many large-scale process applications, and any decline in their performance has a considerable effect on the underlying process. It is known that the efficiency of a power plant is greatly affected by the temperature difference of the condenser. The objective of this paper was to produce cooling tower design recommendations and considerations that would prevent negative impacts and ensure stable and efficient operation. Computational fluid dynamics (CFD) was used to examine the components that contribute to cooling tower performance, using steady-state simulations and average weather data from the Egyptian Meteorological Authority. Air flow patterns in and around cooling towers were predicted using computational fluid dynamics. The current study includes a numerical analysis of the performance of the cooling tower at different wind speeds and heights of the cooling tower above the ground. This study found that some wind speeds have a negative effect and others have a positive effect, and the height of the cooling tower above the ground has a positive effect on the performance of the tower.
Ancient Egyptian obelisks have been carved thousands of years ago and survived many earthquakes and wind storms. This study examines the aerodynamic characteristics and the response of two of the tallest and slenderest ancient Egyptian obelisks to boundary layer winds using a two-phase methodology. The firstphase involved preparing computational fluid dynamics (CFD) models for the twoobelisks with different angles of projection to wind. The variations in the windpressure coefficient and the forces on the obelisks have been studied for differentprojection angles, different reference velocities and along the height of eachobelisk. Within the second phase structural analysis was performed subjecting eachobelisk to a wind load under different angles of loading. The results show that whensubject to boundary layer winds, the pressure coefficient on the surface and thestresses within the obelisks vary significantly with the angle of attack and dimensions of the obelisk.
1 October 2022 in Journal of Al-Azhar University Engineering Sector
In this paper, numerical analysis is used to investigate thermal comfort and airflow patterns in ventilated living rooms, including window openings and utilizing a ceiling fan. The air distribution in the living room was accurately predicted in this study using the CFD program. A five-bladed commercial ceiling fan is used to ventilate the room. The major goal of this study is to change the fan speed, fan height, and fan direction of rotation for the purpose of providing the thermal comfort conditions for individuals in the living room. Temperatures, velocities, the PPD index (Predicted Percentage Dissatisfied), and the PMV index (Predicted Mean Vote) distribution have all been taken into consideration while analyzing each case. The results showed that the best thermal comfort values are associated with fan placement in the center of the room at a height of 2.75 m from the floor at a rotational speed of 110 rpm. The overall level of thermal comfort is not significantly different whether downward-drive or upward-drive fans are used, but there is a substantial variation in the local level of thermal comfort in an occupied zone. في هذا البحث ، يتم استخدام التحليل العددي للتحقق من الراحة الحرارية وأنماط تدفق الهواء في غرف المعيشة ذات التهوية بما في ذلك فتحات النوافذ مع استخدام مروحة السقف. تم التنبؤ بدقة بتوزيع الهواء في غرفة المعيشة في هذه الدراسة باستخدام برنامج تحليل عدادى (بإستخدام ديناميكا الموائع الحسابيه). تستخدم مروحة سقف تجارية بخمس شفرات لتهوية الغرفة. الهدف الرئيسي من هذه الدراسة هو تغيير سرعة المروحة وارتفاعها واتجاه دوران المروحة لغرض توفير ظروف الراحة الحرارية للأفراد في غرفة المعيشة. تم أخذ توزيع درجات الحرارة والسرعات ومؤشر (النسبة المئوية المتوقعة غير الراضية) ومؤشر (متوسط التصويت المتوقع) في الاعتبار أثناء تحليل كل حالة. أظهرت النتائج أن أفضل قيم الراحة الحرارية مرتبطة بوضع المروحة في وسط الغرفة على ارتفاع 2.75 متر من الأرضية، بسرعة دوران 110 دورة في الدقيقة. لا يختلف المستوى العام للراحة الحرارية اختلافًا كبيرًا سواء تم...
19 October 2026 in Journal of Thermal Analysis and Calorimetry
Smoke management is essential for maintaining tenable conditions during fire emergencies in large enclosed arenas. Although Computational Fluid Dynamics has been widely applied to investigate smoke movement, the combined effects of complex roof geometry, mechanical ventilation capacity, and occupant tenability in sports arenas remain insufficiently explored. This study numerically evaluates smoke management in the Galatsi Olympic Hall using the Fire Dynamics Simulator, with the numerical model validated against published large-scale fire experiments. Four design fire scenarios (5, 10, 15, and 20 MW) were simulated over a 600-s period to compare natural ventilation with mechanical smoke extraction operating between 4 and 10 air changes per hour (ACH). Smoke-layer height, gas temperature, visibility, and carbon monoxide concentration were evaluated against established tenability criteria (NFPA 92B, SFPE Handbook, and NFPA 130). The results show that natural ventilation was unable to maintain tenable conditions under the most severe fire scenario, whereas mechanical smoke extraction significantly improved smoke-control performance. Under the investigated conditions, extraction rates of 8–10 ACH provided the most favorable overall performance among the investigated cases. These findings provide engineering guidance for the performance-based design of smoke management systems in large enclosed sports arenas with similar geometric characteristics. These configuration-specific findings provide engineering guidance for the performance-based design of smoke management systems in large enclosed sports arenas with similar geometric characteristics.
23 September 2025 in Case Studies in Thermal Engineering