The development of degradable plastic foams is in line with the current development concept of being pollution free and sustainable. Poly(lactic acid) (PLA) microporous foam with biodegradability, good heat resistance, biocompatibility, and mechanical properties can be successfully applied in cushioning packaging, heat insulation, noise reduction, filtration and adsorption, tissue engineering, and other fields. This paper summarizes and critically evaluates the latest research on preparing PLA microporous materials by supercritical carbon dioxide (scCO₂) physical foaming since 2020. This paper first introduces the scCO₂ foaming technologies for PLA and its composite foams, discusses the CO₂-assisted foaming processes, and analyzes the effects of process parameters on PLA foaming. After that, the paper reviews the effects of modification methods such as chemical modification, filler filling, and mixing on the rheological and crystallization behaviors of PLA and provides an in-depth analysis of the mechanism of PLA foaming behavior to provide theoretical guidance for future research on PLA foaming. Lastly, the development and applications of PLA microporous materials based on scCO₂ foaming technologies are prospected.

With the miniaturization and integration of electronic products, the heat dissipation efficiency of electronic equipment needs to be further improved. Notably, polymer materials are a choice for electronic equipment matrices because of their advantages of low cost and wide application availability. However, the thermal conductivity of polymers is insufficient to meet heat dissipation requirements, and their improvements remain challenging. For decades, as an efficient manufacturing technology, additive manufacturing has gradually attracted public attention, and researchers have also used this technology to produce new thermally conductive polymer materials. Here, we review the recent research progress of different 3D printing technologies in heat conduction and the thermal conduction mechanism of polymer matrix composites. Based on the classification of fillers, the research progress of thermally conductive materials prepared by fused filament fabrication (FFF) is discussed. It analyzes the internal relationship between FFF process parameters and the thermal conductivity of polymer matrix composites. Finally, this study summarizes the application and future development direction of thermally conductive composites by FFF.

Wearable flexible sensors with high sensitivity and wide detection range are applied in motion detection, medical diagnostic result and other fields, but poor resilience and hysteresis remain a challenge. In this study, a high-resilience foam sensor was prepared through a combination of additive manufacturing and green physical foaming method. The conductive filaments were prepared by using MWCNTs-modified TPU by the physical method of melt blending. Samples were prefabricated using the FFF printer and then saturated with CO₂ in an autoclave before being removed and heated to foam. The composite foam effectively reduced residual strain, demonstrating the high resilience of the 3D-printed composite materials with a foam porous structure. The residual strain of the sample before foaming was >6% after a single cycle, and then gradually increased. The residual strain of the foamed samples is less than 5%. In addition, composite foam has high sensitivity and can monitor subtle pressure changes (0~40 kPa). The sensing performance of the composite foam was evaluated, and the current signal remained stable under different loading rates and small compression strains (2~5%). By using this highly resilient conductive composite material, a hierarchical shoe insole was designed that successfully detected human walking and running movements.

Bioactive glasses (BG), notably 63s BG, possess distinct properties such as biodegradability, biocompatibility, and the ability to boost cellular interactions. Our research concentrated on formulating polycaprolactone (PCL) porous scaffolds enriched with 63s BG to gauge their combined mechanical and biological potentials. Using twin-screw extrusion, we created composites containing 5%, 10%, and 20% 63s BG. These were transformed into cylindrical scaffolds using 3D printing. Our assessments involved melt flow, SEM, XRD, water contact angle metrics, DSC, and extracorporeal degradation. After co-culturing with MC3T3-E1 cells, an uptick in alkaline phosphatase activity was noted. Preliminary findings demonstrated that as 63s BG content increased, the properties of the composites improved. Yet, they fell short of replicating the mechanical nuances of cortical bone, rendering them inapt for load-bearing orthopedic applications but suitable for mending minor bone defects or cartilage. In summary, while 63s BG brings about significant advancements in scaffold attributes, attaining the mechanical traits ideal for certain medical purposes remains elusive. This investigation offers foundational insights for the evolution of optimized bone tissue engineering materials.