6 May 2022 in Smart Materials and Structures
Smart materials are widely used for vibration control of rotating machines. This paper considers the control of vibration of a bi-disk rotor bearing system using electro-rheological elastomer (ERE) rings inserted in the bearings. The bi-disk rotor is selected so that vibration response can be studied in a rotating speed range which includes the first two critical speeds. The rotor bearing system is modelled using the finite element method taking into account the gyroscopic effect of the rotor and the internal damping of the shaft. The influence of the active elastomer when it is subjected to different levels of the electric field on the critical speeds is first investigated. Then, the vibration response is determined for both steady-state and transient running up and running down conditions. Simulation results show the potentials of the ERE when used in passive mode for vibration reduction in the steady-state and transient running up and down conditions of the rotor system. In the active mode, the application of an electric field to the EREs shifts slightly the resonant speeds to higher frequencies due to the increase of the stiffness of the bearings while increasing the vibration amplitudes in the steady-state and transient running up and down conditions in the vicinity of the resonant speeds. Nevertheless, it has been shown that the rotor steady-state vibration response can be reduced at other rotating speed range when an electric field is applied.
26 August 2026 in Journal of Intelligent Material Systems and Structures
Magnetorheological elastomers (MREs) are magneto-active smart materials consisting of micron-sized ferromagnetic particles embedded in an elastomeric matrix. This paper presents a dynamic analysis of a novel hybrid MRE ring designed for vibration control of rotor system. The proposed hybrid MRE comprises alternating sectors of silicone rubber-based MRE (MRE-SR) and polydimethylsiloxane-based MRE (MRE-PDMS). The rheological properties of these two smart materials, particularly the storage modulus and the loss modulus, are derived from the literature. To assess the effectiveness of the hybrid design, its vibration responses are compared with those of conventional MRE-SR and MRE-PDMS rings. Frequency-dependent stiffness and loss factors of all MRE variants are first characterized under identical magnetic fields to assess their viscoelastic properties. A rotor system supported by MRE ring bearings is then modeled and analyzed, to evaluate vibration responses and resonant speeds across rotating speeds. The results reveal that the hybrid MRE presents compromised dynamic characteristics between the two single-material rings. Compared to MRE-PDMS, the hybrid reduces vibration amplitude by up to 76.9% at the first critical speed and 34.8% at the second critical speed. When the magnetic field is applied, the vibration amplitude increases at resonance speeds while decreasing at other ranges of rotational speeds.
2 January 2026 in Mechanics Based Design of Structures and Machines
1. Mechanical systems and structures subjected to dynamic loads are usually affected by vibrations that can reduce their performance and their stability. Several control methods have been developed...