Yusheng Yang

Dr. Yusheng Yang


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 June 2021 in HardwareX
Verified
Journal Article
Open access
YYYusheng Yang
Yusheng Yang
JXJun Xu
Jun Xu
WEWillemijn S. Elkhuizen
Willemijn S. Elkhuizen
YSYu (Wolf) Song
Yu (Wolf) Song
Acquiring an accurate 3D scan of the human hand is a challenging task, mainly due to the complicated geometry and the instability of the hand. In this paper, we present a low-cost photogrammetry-based scanner that is designed for scanning the human hand. The scanner has fifty modules, each has a Raspberry Pi with an 8-megapixels camera. They are uniformly positioned in two parallel frames and 96% of a hand surface can be viewed by at least 3 cameras. Using the timestamp method, we synchronize the shutters of the 50 cameras within the range of 80 ms to minimize the influence of the instability of the hand. Moreover, the scanner is easy to build with its modular design, and easy to operate with a laptop that is connected to the system by WiFi. Using a 3D printed prosthetic hand, we compared the 3D scanning accuracy of the proposed scanner with the Artec Spider® scanner. The mean absolute error between the two scans is 0.62 ± 0.28 mm. It is concluded that the proposed hand scanner can be used as a low-cost yet accurate tool in many applications, such as personalized product design.

1 October 2021 in Applied Ergonomics
Verified
Journal Article
Open access
YYYusheng Yang
Yusheng Yang
HZHongpeng Zhou
Hongpeng Zhou
YSYu (Wolf) Song
Yu (Wolf) Song
PVPeter Vink
Peter Vink
Hand anthropometry is one of the fundamentals of ergonomic research and product design. Many studies have been conducted to analyze the hand dimensions among different populations, however, the definitions and the numbers of those dimensions were usually selected based on the experience of the researchers and the available equipment. Few studies explored the importance of each hand dimension regarding the 3D shape of the hand. In this paper, we aim to identify the dominant dimensions that influence the hand shape variability while considering the stability of the measurements in practice. A novel four-step research method was proposed where in the first step, based on literature study, we defined 58 landmarks and 53 dimensions for the exploration. In the second step, 80,000 virtual hand models, each had the associated 53 dimensions, were augmented by changing the weights of Principle Components (PCs) of a statistical shape model (SSM). Deep neural networks (DNNs) were used to establish the inverse relationships from the dimensions to the weight of each PC of the hand SSM. Using the structured sparsity learning method, we identified 21 dominant dimensions that represent 90% of the variance of the hand shape. In the third step, two different manual measuring methods were used to evaluate the stability of the measurements in practice. Finally, we selected 16 dominant dimensions with lower measurement variance by synthesizing the findings in Step 2 and 3. It was concluded that the recognized 21 dominant dimensions can be treated as the reference dimensions for anthropometric study and using the selected 16 dominant dimensions with lower measurement variance, ergonomists are able to generate a 3D hand model based on simple measurement tools with an accuracy of 5.9 mm. Though the accuracy is limited, the efforts are minimum, and the results can be used as an indicator in the early stage of research/design.

14 August 2024 in Sensors
Verified
Journal Article
Open access
PDF file
YYYusheng Yang
Yusheng Yang
JLJiajia Liu
Jiajia Liu
HZHongpeng Zhou
Hongpeng Zhou
AKAfimbo Reuben Kwabena
Afimbo Reuben Kwabena
YZYuqiao Zhong
Yuqiao Zhong
YXYangmin Xie
Yangmin Xie
The expression of robot arm morphology is a critical foundation for achieving effective motion planning and collision avoidance in robotic systems. Traditional geometry-based approaches usually suffer from the contradiction between the high demand for computing resources for fine expression and the insufficient detail expression caused by the pursuit of efficiency. The signed distance function addresses these drawbacks due to its ability to handle complex and arbitrary shapes and lower computational requirements. However, conventional robotic morphology methods based on the signed distance function often face challenges when the robot moves dynamically, since robots with different postures are modeled as independent individuals but the postures of robots are infinite. In this paper, we introduce RobotSDF, an implicit morphology modeling approach that can express the robot shape of arbitrary posture precisely. Instead of depicting a whole model of the robot arm, RobotSDF models the robot morphology as integrated implicit joint models driven by joint configurations. In this approach, the dynamic shape change process of the robot is converted into the coordinate transformations of query points within each joint’s coordinate system. Experimental results with the Elfin robot demonstrate that RobotSDF can accurately depict robot shapes across different postures up to the millimeter level, which exhibits 38.65% and 66.24% improvement over the Neural-JSDF and configuration space distance field algorithms, respectively, in representing robot morphology. We further verified the efficiency of RobotSDF through collision avoidance in both simulation and actual human–robot collaboration experiments.

24 October 2020 in Sensors
Verified
Journal Article
Open access
PDF file
YXYangmin Xie
Yangmin Xie
RZrui zhou
rui zhou
YYYusheng Yang
Yusheng Yang
Real-time obstacle avoidance path planning is critically important for a robot when it operates in a crowded or cluttered workspace. At the same time, the computational cost is a big concern once the degree of freedom (DOF) of a robot is high. A novel path planning strategy, the distorted configuration space (DC-space) method, was proposed and proven to outperform the traditional search-based methods in terms of computational efficiency. However, the original DC-space method did not sufficiently consider the demands on automatic planning, convex space preservation, and path optimization, which makes it not practical when applied to the path planning for robot manipulators. The treatments for the problems mentioned above are proposed in this paper, and their applicability is examined on a three DOFs robot. The experiments demonstrate the effectiveness of the proposed improved distorted configuration space (IDCS) method on rapidly finding an obstacle-free path. Besides, the optimized IDCS method is presented to shorten the generated path. The performance of the above algorithms is compared with the classic Rapidly-exploring Random Tree (RRT) searching method in terms of their computation time and path length.

13 October 2022 in Remote Sensing
Verified
Journal Article
Open access
PDF file
YYYusheng Yang
Yusheng Yang
GFGuorun Fang
Guorun Fang
ZMZhonghua Miao
Zhonghua Miao
YXYangmin Xie
Yangmin Xie
Aligning indoor and outdoor point clouds is a challenging problem since the overlapping area is usually limited, thus resulting in a lack of correspondence features. The windows and doors can be observed from both sides and are usually utilized as shared features to make connections between indoor and outdoor models. However, the registration performance using the geometric features of windows and doors is limited due to the considerable number of extracted features and the mismatch of similar features. This paper proposed an indoor/outdoor alignment framework with a semantic feature matching method to solve the problem. After identifying the 3D window and door instances from the point clouds, a novel semantic–geometric descriptor (SGD) is proposed to describe the semantic information and the spatial distribution pattern of the instances. The best object match is identified with an improved Hungarian algorithm using indoor and outdoor SGDs. The matching method is effective even when the numbers of objects are not equal in the indoor and outdoor models, which is robust to measurement occlusions and feature outliers. The experimental results conducted in the collected dataset and the public dataset demonstrated that the proposed method could identify accurate object matches under complicated conditions, and the alignment accuracy reached the centimeter level.

18 October 2024 in IEEE Geoscience and Remote Sensing Letters
Verified
Journal Article
Closed access
WQWei Qian
Wei Qian
YYYusheng Yang
Yusheng Yang
YXYao Xiao
Yao Xiao
KXKang Xu
Kang Xu
SXShaorong Xie
Shaorong Xie
YXYangmin Xie
Yangmin Xie
This paper proposes Depth-Aided Incremental Image Stitching (DAIIS), an algorithm tailored for low-altitude UAV images in urban environments. DAIIS integrates single-view depth estimation and plane fitting to identify ground feature points, enabling precise computation of transformation matrices and significantly reducing stitching errors caused by large depth variations. Unlike traditional methods, DAIIS effectively addresses misalignments and artifacts, producing seamless and accurate stitched images that closely resemble the real scene. Evaluated on three distinct datasets, DAIIS demonstrated superior performance, achieving a 70% reduction in Mean Square Error (MSE) and notable improvements in Peak Signal-to-Noise Ratio (PSNR) and Structural Similarity Index (SSIM) compared to other methods. The results validate DAIIS as a robust solution for high-precision image stitching, enhancing accuracy and visual quality in challenging low-altitude scenarios, which offers reliable and high-quality results for various urban applications.