Ralph E. Edward White

Dr. Ralph E. Edward White


Research Focus & Metrics

Academic Career Length

37Years (1990-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2011 in Journal of the Electrochemical Society
Verified
Journal Article
Closed access
PDF file
MGMeng Guo
Meng Guo
GSGodfrey Sikha
Godfrey Sikha
RWRalph E. Edward White
Ralph E. Edward White
The single-particle model presented by Santhanagopalan et al. [ J. Power Sources , 156 , 620 (2006)] is extended to include an energy balance. The temperature dependence of the solid phase diffusion coefficient of the lithium in the intercalation particles, the electrochemical reaction rate constants, and the open circuit potentials (OCPs) of the positive and negative electrodes are included in the model. The solution phase polarization is approximated using a nonlinear resistance, which is a function of current and temperature. The model is used to predict the temperature and voltage profiles in a lithium-ion cell during galvanostatic operations. The single-particle thermal model is validated by comparing the simulated voltage and temperature profiles to the results obtained using a distributed porous electrode model. The simulation results from the single-particle thermal model also show good agreement with experimental voltage data obtained from lithium-ion pouch cells under different discharge rates (C/33, C/2 and C) at different temperatures (15, 25, 35, and <mml:math display="inline"><mml:mrow><mml:mn>45</mml:mn><mml:mi>°</mml:mi><mml:mi mathvariant="normal">C</mml:mi></mml:mrow></mml:math>45°C ).

1 January 2010 in Journal of the Electrochemical Society
Verified
Journal Article
Closed access
PDF file
LCLong Cai
Long Cai
RWRalph E. Edward White
Ralph E. Edward White
The proper orthogonal decomposition method was applied to develop an efficient, reduced order electrochemical–thermal model for a lithium-ion cell. This model was validated for discharge simulations over a wide range of C rates and various cooling conditions of the cell. The reduced order model agrees well with the COMSOL model, a commercial finite element method solver, and requires times less computation time than the COMSOL model. The model predictions indicate that the discharge time or percent of capacity removed from the cell at an end of discharge voltage of 3.0 V depends on the rate of the discharge and heat transfer rate away from the cell. Also, the heat transfer rate determines whether the capacity removed is limited by mass transfer in the solid phase or mass transfer in the electrolyte.

17 June 2019 in Journal of the Electrochemical Society
Verified
Journal Article
Closed access
PDF file
SGShang Gao
Shang Gao
LLLanguang Lu
Languang Lu
MOMinggao Ouyang
Minggao Ouyang
YDYongkang Duan
Yongkang Duan
XZXinwei Zhu
Xinwei Zhu
PCPaul T Coman
Paul T Coman
An experimental study of the module-to-module thermal runaway (TR) propagation in a multi-modular battery pack is presented here. During the experiment a cell in one of the modules is triggered by heating to study both cell-to-cell and module-to-module propagation. In order to understand the mechanism and gain insight into the thermal hazards of a battery pack system, the thermal characteristics of the cells in different modules are analyzed in detail. Although the TR-propagations are all triggered from the side next to the heater, the results indicate that the thermal characteristics of the modules vary in different phases. The upward direction of burning flame and heat flow highlight the importance of design considerations in a multi-modular battery pack.

1 January 2010 in Journal of the Electrochemical Society
Verified
Journal Article
Closed access
PDF file
SRSaeed Khaleghi Rahimian
Saeed Khaleghi Rahimian
SRSean C. Rayman
Sean C. Rayman
RWRalph E. Edward White
Ralph E. Edward White
Using a dynamic optimization method, the optimum charge currents as a function of cycle number during cycling for the lithium-ion cell are obtained. A single particle physics-based model, which includes capacity fade, was applied to simulate the cell performance under low earth-orbit (LEO) cycling conditions. Useful cell life is defined as the number of cycles before the end of discharge voltage drops below 3.0 V or the cell discharge capacity becomes less than 20% of the original discharge capacity. The simulated useful cell life can be increased by <mml:math display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn>29.28</mml:mn><mml:mi mathvariant="normal">%</mml:mi></mml:mrow></mml:math>∼29.28% by varying the charge current.

31 January 2019 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
PDF file
NKNiloofar Kamyab
Niloofar Kamyab
JWJohn W. Weidner
John W. Weidner
RWRalph E. Edward White
Ralph E. Edward White
A mixed mode solid electrolyte interphase (SEI) growth model is presented that includes both the influence of the kinetics of the solvent reduction reaction at the SEI/electrode interface and diffusion of the solvent through the SEI layer. The governing equations are solved numerically to predict the solvent concentration profile, the SEI layer thickness, and the capacity loss. Capacity loss predictions are fitted to two sets of experimental data from the literature. The high quality of the fits demonstrates that the mixed mode model provides a useful description of the capacity loss in the cell due to the growth of the SEI layer on the anode under constant voltage storage condition. Also, analytical expressions are presented for SEI growth for both the combined kinetics/diffusion mode (mixed mode model) and the limit of a fast solvent reduction reaction (diffusion limited mode model) as a function of cell characteristics.

1 January 2011 in Journal of the Electrochemical Society
Verified
Journal Article
Closed access
PDF file
MGMeng Guo
Meng Guo
RWRalph E. Edward White
Ralph E. Edward White
In this work, a mathematical thermal model for lithium ion battery pack with specific configuration was developed by coupling the single particle model and energy balance equation with basic circuit constraints. The temperature variation at different parts of the battery pack was considered in charge/discharge operations, and the dependency of cell parameters on temperature were taken into account. The model was validated by comparing the simulated current, voltage, and temperature profiles with experimental data. Case studies such as battery balancing and circuit interruption were also performed and discussed.