Epoxy composites with glass fiber reinforcement can be found in the automotive and aerospace industries. In this study, the properties of the epoxy matrix were enhanced by processing composites filled with ceramic particles of silicon carbide (SiC). At first, SiC-filled E-glass fiber-reinforced epoxy composites/sandwich structures were processed using the hand layup technique. Next, processed composites were characterized using a tensile tester and an Izod impact tester to determine the best mixing ratio of ceramic-embedded epoxy composites. The highest mechanical properties were obtained according to ASTM D638 and D256 standards. Next, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), analysis of differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA) were carried out respectively to find out the presence of functional groups, surface morphology, crystallographic structure, glass transition temperature (Tg) and thermal/material stability of processed composites. In the end, the study elaborates that the mechanical properties of epoxy matrix composites were improved by the addition of SiC ceramic fillers, and among processed composites, 10% SiCE composite carried the highest properties, including the Tg value of 62.8 °C, 69.87 MPa for tensile strength and 57.12 kJ m−1 for impact strength.
This study is focused on to find out chemical and structural suitability of newly synthesised ceramic-embedded polymer composite as bone cement. Synthesised ceramic is derived from high-grade rock phosphate and is a form of hydroxyapatite prepared using sol–gel technique, alcoholic route. A mixture of commercially available bone cement and its liquid monomer, commercially available methyl methacrylate (MMA) and a mixture of sol–gel-synthesised Eppawala hydroxyapatite (SGHAp) powder with commercially available MMA was prepared. Then physical and chemical properties including composition, crystallinity, presence of functional groups, thermal stability, surface morphology and microstructural features were examined compared to human bone. Results show that there is a close similarity between newly synthesised product and human bone. Also it has credent high thermal stability and good crystalline properties than the commercial product. The study concluded that newly synthesised SGHAp-embedded MMA composite can be used directly as a substitution for human bone.