In this paper, we have utilized Lateral Force Microscopy (LFM) based mechanical pushing of micro/nano-objects to study adhesion and friction characterization at the micro/nanoscale. Continuum micro...
The elliptical adhesive contact is studied experimentally utilizing two hemicylinders of elastomeric poly(dimethylsiloxane) (PDMS). Experimental results are compared with the recent approximate Johnson–Kendall–Roberts (JKR) theory for elliptical contacts, and the deviation of the experiments from this theory is discussed in detail. To do this, the cylinders are placed with different skew angles with respect to each other in order to emulate the effect of orientation. The maximum adhesion force and the size of the contact zone are determined experimentally under the action of surface energy. The difference of the maximum adhesion force between experiments and theory is found to increase as the contact area goes from mildly elliptical to slim elliptical contact. Similarly, it is observed that the contact area can be approximated to have elliptical geometry for a wide range of skew angles while a deviation is observed for slim elliptical contacts. Moreover, the reduction in the contact area is observed to be nonself-similar during detachment from an elliptical shape to a circular one.
1 October 2008 in Review of Scientific Instruments
In this work, calibration and correction of cross-talk in atomic force microscopy (AFM) is demonstrated. Several reasons and effects of this inherent problem on experimental results are discussed. We propose a general procedure that can be used on most AFM systems to compensate for cross-talk on the cantilever bending and twisting signals. The method utilizes two initial experiments on a flat surface to achieve an affine transformation between the measured signals and the actual signals. Using this transformation directly on the voltage signals allows us to remove the detrimental effects of cross-talk on AFM-based force measurement experiments. The achieved transformation matrix can be turned into a simple circuit and applied online, by users who have access to the raw signals in the AFM head. As a case study, a lateral deflection based mechanical characterization test for a poly(methyl methacrylate) microfiber that is suspended on a trench is investigated in terms of the effectiveness of the cross-talk compensation.