Summary: Wind turbine emulators (WTE) have become a necessity for testing, developing, and improving design and control strategies in the renewable energy domain. The aim of this paper is to realize an experimental standalone wind energy conversion system emulator (WECSE) with improved torque and current control strategy using a nonlinear PI controller. The prototype was developed with a separately excited DC motor to simulate the wind turbine by providing the required speed and torque for power generation using a directly driven wound‐rotor synchronous generator and a power conversion system controlled by a modified drift‐free Perturb and Observe (P&O) Maximum Power Point Tracking algorithm (MPPT). The DC motor torque is controlled by an nonlinear PI controller regulator for an estimated current reference through a chopper driven by a dSPACE control board where the MATLAB/Simulink platform is used for wind turbine simulation. The proposed method was validated by experimental tests for different wind speeds and was compared with the conventional method. The experimental results have demonstrated that the control, emulation, and MPPT performances of the proposed method are significantly better.
The quadrotor is an unmanned aerial vehicle (UAV) with four rotors, able to carry out a multitude of missions. This paper consists of establishing nonlinear laws of command to control the movement of this engine. Firstly a dynamic model, taking care of the all the phenomenon which govern the movement of the helicopter, has been developed. Secondly two approaches of control one classic, the other uses the backstepping. Thereafter, a new strategy has been proposed to improve the performance of control. The control law of this technique is developed using backstepping based on the PID. The results of simulation show the performance of this command.