In the fabrication of polymeric electroluminescent devices with indium-tin oxide (ITO) as anode, indium contamination of the polymers can greatly degrade the device performance. In the present study, we have used x-ray photoelectron spectroscopy to measure indium incorporation in poly(3,4-ethylene dioxythiophene):poly(styrene sulphonate), referred to as PEDOT:PSS, which were spincast on bare ITO and encapsulated ITO. We found that the deposition of a self-assembled monolayer of alkylsiloxanes on ITO prior to spincasting PEDOT:PSS was effective and practical in blocking the reactions between ITO and PEDOT:PSS.
The influence of oxidative and reductive treatments of indium–tin–oxide (ITO) on the performance of electroluminescent devices is presented. The improvement in device performance is correlated with the surface chemical composition and work function. The work function is shown to be largely determined by the surface oxygen concentration. Oxygen-glow discharge or ultraviolet–ozone treatments increase the surface oxygen concentration and work function in a strongly correlated manner. High temperature, vacuum annealing reduces both the surface oxygen and work function. With oxidation the occupied, density of states (DOS) at the Fermi level is also greatly reduced. This process is reversible by vacuum annealing and it appears that the oxygen concentration, work function, and DOS can be cycled by repeated oxygen treatments and annealing. These observations are interpreted in terms of the well-known, bulk properties of ITO.
Silicon carbide (SiC) nanowires on a silicon substrate were prepared using hot-filament-assisted chemical-vapor deposition with a solid silicon and carbon source. The SiC nanowires show good field-emitting properties as revealed by the current–voltage characteristics. Together with its ease of preparation, these SiC nanowires are shown to have great potential in the area of electron field-emitting devices.
Silicon nanowires (SiNWs) were synthesized using laser ablation. A continuous SiNW film was prepared by grinding the pieces of sponge-like SiNWs to powder, then dispersing and sticking the powder onto a Si wafer. The field emission characteristics of the SiNW film were studied based on current–voltage measurements and the Fowler–Nordheim equation. The electron field emission increased with decreasing diameter of SiNWs. A hydrogen plasma treatment of the SiNW film aimed at reducing the oxide overlayer improved the emission uniformity of the film.