A zero-voltage and zero-current switching full-bridge pulse-width modulated dc-dc converter with controlled secondary-side rectifier using a novel nondissipative energy recovery turn-off snubber is presented in this paper. Using a controlled rectifier, a turn-off snubber, and an innovative control algorithm, the circulating current of the converter is eliminated and soft switching for all power switches of the inverter is achieved for full-load range from no-load to short circuit. The principle of converter operation is explained and analyzed and the experimental results on a 4.5 kW, 100 kHz laboratory model of the converter are presented.

Soft switching pulse-width modulation (PWM) dc-dc full-bridge converter with controlled rectifier on the secondary side of the high-frequency power transformer is presented in this paper. An active secondary switch, including new nondissipative passive energy recovery turn-off snubber on the secondary side and modified PWM control algorithm, provide conditions for zero-voltage and zero-current turn-on and zero-current turn-off of IGBT transistors on the primary side of the high-frequency dc-dc converter. The simple passive energy recovery snubber ensures also zero-voltage turn-off of the transistor on the secondary side of the power transformer. The principle of operation is explained and analyzed and consequently verified on a 2 kW, 50 kHz laboratory model of the converter.

The paper describes the digital twin of a Li-ion battery cell based on the MATLAB/Simulink generic model. The digital twin is based on measured data for constant current/constant voltage charging and discharging cycles with State of Health (SoH) up to 79%, also including fast charging. Mathematical equations used for the digital twin are obtained by 3D data fitting of measured SoH, battery capacity, and battery cell current. The input to the proposed digital twin is only the measured battery cell current, and its output includes State of Charge (SoC), SoH, and battery cell voltage. The designed digital twin is tested and compared with MATLAB/Simulink generic model and battery cell measurements for constant discharging current and dynamically generated discharging current profile. The results show significant improvement in the generic MATLAB/Simulink model.

This paper introduces a high-frequency soft-switching pulse-width modulation DC-DC power converter with secondary active rectifier tested as a DC current source for arc welding applications. The soft-switching DC-DC converter consists of a high-frequency full-bridge inverter, high-frequency power transformer, and a controlled output rectifier with new secondary energy recovery turn-off snubber. Circulating currents in the converter are reduced by using active rectifier, and RMS values of the currents in primary and secondary switches are decreased by utilizing a novel control algorithm. The experimental results of a 4.5 kW DC-DC converter working at switching frequency of 100 kHz are presented.

This paper describes a high-frequency soft-switching dc-dc converter with a simple energy recovery capacitor snubber on the secondary side. The presented dc-dc full-bridge converter with the energy recovery snubber removes the main drawbacks of the classic Phase Shifted PWM (PS-PWM) dc-dc converter, e.g., the circulating current flowing during the free-wheeling interval and dependency of the soft switching on the load current. The converter utilizes a full-bridge topology with pulse-width modulation and a centre-tapped full-wave controlled rectifier with one active switch. The zero-voltage switching on the primary side is ensured by utilising only the magnetizing current of the high-frequency transformer, and thus is load-independent. The proposed energy recovery snubber is described in detailed time waveforms of the converter and verified by simulation. The control algorithm also removes the circulating current, which is typical for PS-PWM converters. The soft-switching of the secondary side transistor is achieved by a simple capacitor snubber with an energy-recovery circuit connected to the output of the dc-dc converter. The principle of operation is verified by measurements on a 2 kW, 50 kHz laboratory model of the proposed dc-dc converter.

The paper presents a novel control technique for a phase-shifted PWM (PS-PWM) soft-switching dc-dc converter. The converter is a full bridge dc-dc converter with controlled output rectifier and an active snubber on the secondary side. To solve the problems with nonlinear nature of the dc-dc converter a fuzzy logic control is used. The fuzzy logic controller design and simulation is presented. The performance of the designed fuzzy logic controller is compared to classical PI controller.DOI: http://dx.doi.org/10.5755/j01.eie.22.5.16334