This study presents an investigation of the mix proportion and mechanical properties of one-part alkali-activated geopolymer concrete (GPC). The procedure for determining the mix proportion of one-part alkali-activated GPC, which uses a solid alkali activator in crystal form, is proposed. The proposed procedure was applied to a series of mixed proportions of GPC with different amounts of solid crystalline alkali activator (AA), water (W), and superplasticizer (SP), using the ratio between them to the total amount of binder (B, fly ash, and granulated blast furnace slag) by weight in order to evaluate their effect on the workability and compressive strength of the GPC. The slump, compressive and tensile strength, and elastic modulus of the one-part alkali-activated GPC were tested in various ways. The test results showed that solid crystalline alkali activators, water, and superplasticizers have significant effects on both the workability and compressive strength of GPC. The amount of one-part alkali activator should not exceed 12.0% of the total binder amount by weight (AA/B = 0.12) in order not to lose the workability of GPC. The minimum W–B ratio should be at least 0.43 to ensure the workability of the sample when no superplasticizer is added. An amount of 2.5% can be considered as the upper bound when using superplasticizer-based polysilicate for GPC. In addition, the elastic modulus and various types of tensile strength values of the one-part alkali-activated GPC were evaluated and compared with that predicted from compressive strength using equations given by two common ACI and Eurocode2 codes for ordinary Portland cement (OPC) concrete. Modifications of the equations showing the relationships between splitting tensile strength and compressive strength, as well as between elastic modulus and compressive strength and the development of compressive strength under the time provided by ACI and Eurocode2 for OPC concrete, were also made for one-part alkali-activated GPC.
The applications of the deep belief network (DBN) for addressing practical engineering issues have recently emerged all over the world thanks to its accuracy and availability of data. In this paper, a predictive model using DBN was employed to investigate the factors that affect the ground-penetrating radar (GPR) signals from the rebar embedded in concrete structures. Four variables, namely temperature, relative humidity, chloride contamination level, and rebar surface corrosion condition were used as the model inputs for the investigation. Comprehensive data acquired from previously published documents were used to establish the proposed DBN model. It was shown that temperature and chloride contamination level variables generated significant effects on the GPR amplitude signal from rebar. In contrast, the relative humidity and rebar surface corrosion condition parameters were found to yield a minimal influence on the output of the proposed model. The DBN model can be used to predict the amplitude of GPR signals from the four inputs with a high level of accuracy. Specifically, the coefficient of determination (R2) was 0.9634 and 0.9681 for the testing dataset and the entire database, respectively.
This paper analyzes the vibrational characteristics of a novel sandwich plate configuration composed of an auxetic honeycomb (AH) core and laminated functionally graded carbon nanotube-reinforced composite (FG-CNTRC) face sheets, hereafter referred to as the SD-AuCNT plate. Based on Reddy’s third-order shear deformation theory (SDT), which accurately accounts for transverse shear effects without requiring shear correction factors, the equations of motion are derived using Hamilton’s principle and subsequently solved using a pb-2 Ritz formulation combined with the Newmark time integration scheme for dynamic response analysis. By combining an auxetic core with negative Poisson’s ratio characteristics and laminated FG-CNTRC face sheets featuring tailored CNT distribution patterns and orientations, the hybrid SD-AuCNT plate can improve structural stiffness, energy absorption, and dynamic performance; however, it has not been thoroughly investigated in the existing literature. After verifying the accuracy of the proposed computational procedure, the effects of auxetic core geometry, CNT distribution patterns, thickness ratios, and boundary conditions on the natural frequencies and transient responses of the plate are comprehensively investigated. The results provide new insights into the dynamic behavior of advanced sandwich plates and offer practical guidance for the design of high-performance lightweight structures in aerospace, marine, defense, and other engineering applications.
25 September 2026 in Journal of Science and Technology in Civil Engineering
This paper presents an experimental and theoretical investigation of the vibration behavior of sandwich plates consisting of an Expanded Polystyrene (EPS) porous concrete core and carbon fiber-reinforced polymer (CFRP) face sheets. For the theoretical study, Reddy’s third-order shear deformation theory (RTSDT), combined with the pb-2 Ritz method, is employed to formulate the governing equations, from which natural frequencies are obtained via eigenvalue analysis and dynamic responses are computed using the Newmark integration scheme. The numerical model is validated against established benchmarks. For the experimental study, rectangular sandwich plate specimens with CFRP layups are fabricated and tested under two opposite edges simply supported and the remaining two edges free (SFSF) boundary conditions. The fundamental natural frequencies are measured using step-release free vibration tests with five accelerometers and Fast Fourier Transform (FFT) analysis. The experimentally obtained natural frequencies are then compared with the semi-analytical predictions. The close correlation between the two approaches confirms the reliability of both the proposed model and the experimental procedure. The outcomes of this study can be valuable for the design and analysis of lightweight sandwich plates with porous cores and composite face sheets.