Rhodotorula toruloides is being developed for the use in industrial biotechnology processes because of its favorable physiology. This includes its ability to produce and store large amounts of lipids in the form of intracellular lipid bodies. Nineteen strains were characterized for mating type, ploidy, robustness for growth, and accumulation of lipids on inhibitory switchgrass hydrolysate (SGH). Mating type was determined using a novel polymerase chain reaction (PCR)-based assay, which was validated using the classical microscopic test. Three of the strains were heterozygous for mating type (A1/A2). Ploidy analysis revealed a complex pattern. Two strains were triploid, eight haploid, and eight either diploid or aneuploid. Two of the A1/A2 strains were compared to their parents for growth on 75%v/v concentrated SGH. The A1/A2 strains were much more robust than the parental strains, which either did not grow or had extended lag times. The entire set was evaluated in 60%v/v SGH batch cultures for growth kinetics and biomass and lipid production. Lipid titers were 2.33–9.40 g/L with a median of 6.12 g/L, excluding the two strains that did not grow. Lipid yields were 0.032–0.131 (g/g) and lipid contents were 13.5–53.7% (g/g). Four strains had significantly higher lipid yields and contents. One of these strains, which had among the highest lipid yield in this study (0.131 ± 0.007 g/g), has not been previously described in the literature. The yeast Rhodotorula toruloides was used to produce oil using sugars extracted from a bioenergy grass.
Contamination of water by microcystins is a global problem. These potent hepatotoxins demand constant monitoring and control methods in potable water. Promising approaches to reduce contamination risks have focused on natural microcystin biodegradation led by enzymes encoded by the mlrABCD genes. The first enzyme of this system (mlrA) linearizes microcystin structure, reducing toxicity and stability. Heterologous expression of mlrA in different microorganisms may enhance its production and activity, promote additional knowledge on the enzyme, and support feasible applications. In this context, we intended to express the mlrA gene from Sphingosinicella microcystinivorans B9 in an industrial Saccharomyces cerevisiae strain as an innovative biological alternative to degrade microcystins. The mlrA gene was codon-optimized for expression in yeast, and either expressed from a plasmid or through chromosomal integration at the URA3 locus. Recombinant and wild yeasts were cultivated in medium contaminated with microcystins, and the toxin content was analyzed during growth. Whereas no difference in microcystins content was observed in cultivation with the chromosomally integrated strain, the yeast strain hosting the mlrA expression plasmid reduced 83% of toxins within 120 h of cultivation. Our results show microcystinase A expressed by industrial yeast strains as a viable option for practical applications in water treatment.
• Stable secondary RNA structure 3′ of the start codon inhibits ymNeonGreen expression. • Removing secondary RNA structure increased expression in S. cerevisiae and E. coli. • Expression was increased 2-fold in S. cerevisiae. • Expression was increased 3.8-fold in E. coli. • Increased expression in S. cerevisiae was promoter independent.
Butyric acid, a four-carbon fatty acid, is an important industrial chemical and feedstock. To produce this chemical, a control fermentation was run with a 126.5 g.L−1 glucose concentration in the feed medium. In this medium, the strain produced 44.8 g.L−1 total acid with a productivity of 0.23 g.L−1h−1 and a yield of 0.41 g.g−1. The strain (Clostridium tyrobutyricum ATCC 25755) was also able to utilize glucose and xylose simultaneously with similar fermentation performance. The culture was also used to produce butyric acid from wheat straw hydrolysate (WSH) employing a hot water pretreatment. In a batch system, the strain resulted in a productivity and yield of 0.27 g.L−1h−1 and 0.44 g.g−1, respectively, which was an improvement over the use of glucose or xylose alone or mixtures of both. To improve reactor productivity, a membrane cell recycle bioreactor was used which resulted in a productivity of 1.89 g.L−1h−1. This productivity was 822% of that achieved in the glucose or xylose batch fermentation. Furthermore, a butyric acid recovery method was developed using XAD-4 adsorbent resin. In this system, up to 206.1 g.L−1 of butyric acid was used in the feed and, as a result of the quick adsorption, the residual butyric acid concentration was 29.5 g.L−1. In this experiment, the rate of acid removal of 1059.4 g.L−1h−1 was achieved.
Degradation products from sugars and lignin are commonly generated as byproducts during pretreatment of biomass being processed for production of renewable fuels and chemicals. Many of the degradation products act as microbial inhibitors, including furanic and phenolic compounds and acetate, which is solubilized from hemicellulose. We previously identified a group of fungi, Coniochaeta species, that are intrinsically tolerant to and capable of mineralizing furans present in biomass hydrolysates. Here, we challenged 20 C. ligniaria and phylogenetically related isolates with acetate to test if the robustness phenotype extended to this important inhibitor as well, and all strains grew at concentrations up to 2.5% (w/v) sodium acetate. At the highest concentrations tested (5.0–7.5% w/v), some variation in growth on solid medium containing glucose plus acetate was apparent among the strains. The hardiness of four promising strains was further evaluated by challenging them (0.5% w/v sodium acetate) in mineral medium containing 10 or 15 mM furfural. The strains grew and consumed all of the acetate and furfural. At a higher (2.5% w/v) concentration, consumption of acetate varied among the strains: only one consumed any acetate in the presence of furfural, but all four strains consumed acetate provided that a small amount (0.2% w/v) of glucose was added. Finally, the four strains were evaluated for biological abatement of rice hull hydrolysates having elevated acetate content. The hardiest strains were also able to consume furfural and 5-hydroxymethylfurfural (HMF) within 24 h, followed by acetate within 40 h when grown in dilute acid pretreated rice hulls containing 0.55% acetate, 15 mM furfural, and 1.7 mM HMF. As such, these strains are expected to be helpful for abating non-desirable compounds from unrefined hydrolysates so as to enable their conversion to bioproducts.
6 December 2023 in Biotechnology for Biofuels and Bioproducts
Background: Significant genetic diversity exists across Saccharomyces strains. Natural isolates and domesticated brewery and industrial strains are typically more robust than laboratory strains when challenged with inhibitory lignocellulosic hydrolysates. These strains also contain genes that are not present in lab strains and likely contribute to their superior inhibitor tolerance. However, many of these strains have poor sporulation efficiencies and low spore viability making subsequent gene analysis, further metabolic engineering, and genomic analyses of the strains challenging. This work aimed to develop an inhibitor tolerant haploid with stable mating type from S. cerevisiae YB-2625, which was originally isolated from bagasse. Results: Haploid spores isolated from four tetrads from strain YB-2625 were tested for tolerance to furfural and HMF. Due to natural mutations present in the HO-endonuclease, all haploid strains maintained a stable mating type. One of the haploids, YRH1946, did not flocculate and showed enhanced tolerance to furfural and HMF. The tolerant haploid strain was further engineered for xylose fermentation by integration of the genes for xylose metabolism at two separate genomic locations (ho∆ and pho13∆). In fermentations supplemented with inhibitors from acid hydrolyzed corn stover, the engineered haploid strain derived from YB-2625 was able to ferment all of the glucose and 19% of the xylose, whereas the engineered lab strains performed poorly in fermentations. Conclusions: Understanding the molecular mechanisms of inhibitor tolerance will aid in developing strains with improved growth and fermentation performance using biomass-derived sugars. The inhibitor tolerant, xylose fermenting, haploid strain described in this work has potential to serve as a platform strain for identifying pathways required for inhibitor tolerance, and for metabolic engineering to produce fuels and chemicals from undiluted lignocellulosic hydrolysates.