Takeshi Kato

Dr. Takeshi Kato


Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 December 2019 in Japanese Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
KKKeisuke Kawakami
Keisuke Kawakami
TKTakeshi Kato
Takeshi Kato
DODaiki Oshima
Daiki Oshima
SISatoshi Iwata
Satoshi Iwata
Compositional dependence of spin–orbit torque (SOT) of the bilayer comprised of Ta and ferrimagnetic GdFeCo was investigated. Critical current density of SOT switching J sw of the GdFeCo/Ta bilayers did not vary with Gd composition x , and were found to exhibit roughly J sw = 11 MA cm −2 . Two orthogonal components of SOT, damping-like torque τ DL and field-like torque τ FL were estimated by measuring harmonic Hall resistance under in-plane fields parallel and perpendicular to the AC current, respectively. The absolute values of SOT, ∣ τ DL ∣ and ∣ τ FL ∣, were confirmed to be roughly constant within 22 ≤ x ≤ 28. On the other hand, the sign of τ FL changed across the compensation composition. These results suggest that the injected spin current is considered to exert a torque to the transition metal FeCo moment rather than to the rare earth Gd moment.

19 March 2018 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
YHY. Hashimoto
Y. Hashimoto
NYN. Yamamoto
N. Yamamoto
TKTakeshi Kato
Takeshi Kato
DOD. Oshima
D. Oshima
SIS. Iwata
S. Iwata
Giant magneto-resistance (GMR) spin-valve films with an FeSiB/CoFeB free layer were fabricated to detect applied strain in a GMR device. The magnetostriction constant of FeSiB was experimentally determined to have 32 ppm, which was one order of magnitude larger than that of CoFeB. In order to detect the strain sensitively and robustly against magnetic field fluctuation, the magnetic field modulation technique was applied to the GMR device. It was confirmed that the output voltage of the GMR device depends on the strain, and the gauge factor K = 46 was obtained by adjusting the applied DC field intensity and direction. We carried out the simulation based on a macro-spin model assuming uniaxial anisotropy, interlayer coupling between the free and pin layers, strain-induced anisotropy, and Zeeman energy, and succeeded in reproducing the experimental results. The simulation predicts that improving the magnetic properties of GMR films, especially reducing interlayer coupling, will be effective for increasing the output, i.e., the gauge factor, of the GMR strain sensors.

1 February 2020 in AIP Advances
Verified
Journal Article
Open access
PDF file
DODaiki Oshima
Daiki Oshima
TKTakeshi Kato
Takeshi Kato
SISatoshi Iwata
Satoshi Iwata
5 nm- and 15 nm-thick (001) oriented MnAl films were fabricated on CoGa buffer layers with various thermal treatments. The insertion of the CoGa layer was effective to obtain the square out-of-plane hysteresis loop even in the MnAl thickness of 5 nm. Highly (001) oriented MnAl film was obtained by depositing Mn and Al on CoGa at a substrate temperature of 200°C followed by annealing at 500°C. The perpendicular magnetic anisotropy was estimated to be 7.4±0.2 and 8.5±0.4 Merg/cc for 5 nm- and 15 nm-thick MnAl, respectively. Lower anisotropy in 5 nm-thick MnAl may be due to the interdiffusion between the MnAl and CoGa layers.

1 March 2025 in Applied Physics Express
Verified
Journal Article
Open access
PDF file
RKRio Kawana
Rio Kawana
NONatsuko Oguchi
Natsuko Oguchi
DODaiki Oshima
Daiki Oshima
MYMichiyuki Yoshida
Michiyuki Yoshida
TSTakashi Sugiura
Takashi Sugiura
KYKeisuke Yamada
Keisuke Yamada
We have successfully controlled the layer thickness in Co-Pt alloy multilayer nanowires with a diameter of approximately 130 nm through dual-bath electrodeposition into nanoporous polycarbonate templates. The Co-Pt alloy multilayer nanowires were found to have compositions of cobalt-rich (Co71Pt29) and platinum-rich (Co13Pt87) for various layer thicknesses ranging from 3.3 to 427 nm, as confirmed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations. Both X-ray diffraction (XRD) and TEM analyses revealed a face-centered cubic (FCC) alloy phase corresponding to the Co-Pt alloy in each layer. We could measure the increasing magnetoresistance (MR) ratio by reducing the layer thickness and demonstrate MR measurements resulting from domain wall motion.

27 August 2015 in Metals
Verified
Journal Article
Open access
PDF file
SSShotaro Saito
Shotaro Saito
OOOsamu Ohno
Osamu Ohno
SIShukuro Igarashi
Shukuro Igarashi
TKTakeshi Kato
Takeshi Kato
HYHitoshi Yamaguchi
Hitoshi Yamaguchi
A selective separation and recycling system for metal ions was developed by homogeneous liquid-liquid extraction (HoLLE) using a fluorosurfactant. Sixty-two different elemental ions (e.g., Ag, Al, As, Au, B, Ba, Be, Bi, Ca, Cd, Ce, Co, Cr, Cu, Dy, Er, Eu, Fe, Ga, Gd, Ge, Hf, Hg, Ho, In, Ir, La, Lu, Mg, Mn, Mo, Nb, Nd, Ni, Os, P, Pb, Pd, Pr, Pt, Re, Rh, Ru, Sb, Sc, Se, Si, Sm, Sn, Sr, Ta, Tb, Te, Ti, Tl, Tm, V, W, Y, Yb, Zn, and Zr) were examined. By changing pH from a neutral or alkaline solution (pH ≥ 6.5) to that of an acidic solution (pH < 4.0), gallium, zirconium, palladium, silver, platinum, and rare earth elements were extracted at >90% efficiency into a sedimented Zonyl FSA® (CF3(CF2)n(CH2)2S(CH2)2COOH, n = 6–8) liquid phase. Moreover, all rare earth elements were obtained with superior extraction and stripping percentages. In the recycling of rare earth elements, the sedimented phase was maintained using a filter along with a mixed solution of THF and 1 M sodium hydroxide aqueous solution. The Zonyl FSA® was filtrated and the rare earth elements were recovered on the filter as a hydroxide. Furthermore, the filtrated Zonyl FSA was reusable by conditioning the subject pH.

16 May 2024 in Journal of Magnetism and Magnetic Materials
Verified
Journal Article
Closed access
NONatsuko Oguchi
Natsuko Oguchi
MSMikiko Saito
Mikiko Saito
THTakayuki Homma
Takayuki Homma
TKTakeshi Kato
Takeshi Kato
TOTeruo Ono
Teruo Ono
KYKeisuke Yamada
Keisuke Yamada