Landslides are one of the most recurring and damaging natural hazards worldwide, with rising impacts on communities, infrastructure, and the environment. Landslide hazard, vulnerability, and risk assessments are critical for landslide mitigation, land use and developmental planning. They are, however, often lacking in complex and data-poor regions. This study proposes an integrated approach to evaluate landslide hazard, vulnerability, and risk using a range of freely available geospatial data and semi-quantitative techniques for one of the most landslide-prone areas in the Hindukush mountain ranges of northern Pakistan. Very high-resolution satellite images and their spectral characteristics are utilized to develop a comprehensive landslide inventory and predisposing factors using bi-variate models to develop a landslide susceptibility map. This is subsequently integrated with landslide-triggering factors to derive a Landslide Hazard Index map. A geospatial database of the element-at-risk data is developed from the acquired remote sensing data and extensive field surveys. It contains the building’s footprints, accompanied by typological data, road network, population, and land cover. Subsequently, it is analyzed using a spatial multi-criteria evaluation technique for vulnerability assessment and further applied in a semi-quantitative technique for risk assessment in relative risk classes. The landslide risk assessment map is classified into five classes, i.e., very low (18%), low (39.4%), moderate (26.3%), high (13.3%), and very high (3%). The developed landslide risk index map shall assist in highlighting the landslide risk hotspots and their subsequent mitigation and risk reduction.
Landslides are devastating natural hazards in mountain terrain with significant impacts on the society and economy. The upper Chitral is part of the eastern Hindu Kush ranges and is frequently prone to widespread and damaging landslides, debris flow, and floods. Therefore, it is critical to assess the landslide hazard and their social, economic and environmental impacts, to contribute to disaster risk reduction. This study aims to assess the landslide hazard assessment utilizing the causative and triggering factors and evaluate the physical, social and environmental vulnerability and risk assessment. An extensive field has been conducted to develop a comprehensive landslide inventory and their distribution into different categories. The landslide causative parameters (geological, topographical and anthropogenic) are compared with the landslide inventory using a bivariate statistical model to develop a landslide susceptibility map with an accuracy of 89%. Moreover, building topology data has been acquired for more than 19,000 buildings to evaluate their proneness to landslides. Multi-criteria evaluation techniques have been used to determine the landslide's induced physical, environmental and social vulnerability, which is subsequently integrated with landslide hazard to assess risk. The results show that 28.3% of the total area is highly susceptible to land sliding. Furthermore, the impact of the predicted landslides explicates that 90% of the building/population is living in a very high-risk zone, while the remaining 10% are in a high-risk zone. The study can effectively be used for developing landslide mitigation strategies.
1 June 2026 in Journal of Groundwater Science and Engineering
Northern Pakistan is highly susceptible to debris flows due to its complex geomorphic structure, steep topography, climate change, glaciation, monsoonal rainfall, active seismicity, deforestation, and human activities. Despite this, high-resolution, quantitative assessments of debris flow hazards are limited, constraining effective disaster risk management. This study aims to model a representative debris flow event in the Ghizer District to predict potential deposition areas and support emergency preparedness and sustainable land-use planning in this hazard-prone region. High-resolution Unmanned Aerial Vehicle (UAV)-derived topographic data were integrated with the Rapid Mass Movement Simulation (RAMMS-DF) model to simulate debris flow runout for three release scenarios, representing distinct and combined initiation zones. Satellite images and field validation were used to delineate release and erosion zones, while vulnerability and risk were assessed by mapping exposed elements including 210 buildings and a population of 1,500 and applying spatial multi-criteria analysis within a Geographic Information System (GIS) framework. The numerical simulation for the most critical event, Scenario 3 (representing simultaneous dual-source initiation), yielded the highest magnitude results with a total flow volume of 193,717 m3, a peak flow height of 12.96 m, and a maximum impact pressure of 992.28 kPa. Vulnerability mapping identified infrastructure and agricultural land as the most exposed. Risk assessment showed that the combined scenario posed the greatest threat to local assets and communities. The study demonstrates that debris flow dynamics in high-mountain environments are non-linearly sensitive to initial release volumes and the interaction between multiple flow sources. Topographic controls such as channel confinement and slope variations are the primary drivers of flow intensity and energy dissipation. This research establishes a replicable, data-driven framework for quantitative risk assessment in data-limited mountainous regions. The resulting high-resolution hazard and risk maps provide a scientific basis for defining land-use restrictions, prioritizing slope stabilization, and guiding the placement of emergency infrastructure to support disaster-resilient development in northern Pakistan.