Microgrids can be considered as controllable units from the utility point of view because the entities of microgrids such as distributed energy resources and controllable loads can effectively control the amount of power consumption or generation. Therefore, microgrids can make various contracts with utility companies such as demand response program or ancillary services. Another advantage of microgrids is to integrate renewable energy resources to low-voltage distribution networks. Battery energy storage systems (BESSs) can effectively compensate the intermittent output of renewable energy resources. This paper presents intelligent control schemes for BESSs and autonomous energy management schemes of microgrids based on the concept of multi-agent systems. The proposed control scheme consists of two layers of decision-making procedures. In the bottom layer, intelligent agents decide the optimal operation strategies of individual microgrid entities such as BESSs, backup generators and loads. In the upper layer, the central microgrid coordinator (MGCC) coordinates multiple agents so that the overall microgrid can match the load reduction requested by the grid operator. The proposed control scheme is applied to Korea Power Exchange’s Intelligent Demand Response Program.
Grid codes in many countries require low-voltage ride-through (LVRT) capability to maintain power system stability and reliability during grid fault conditions. To meet the LVRT requirement, wind power systems must stay connected to the grid and also supply reactive currents to the grid to support the recovery from fault voltages. This paper presents a new fault detection method and inverter control scheme to improve the LVRT capability for full-scale permanent magnet synchronous generator (PMSG) wind power systems. Fast fault detection can help the wind power systems maintain the DC-link voltage in a safe region. The proposed fault detection method is based on on-line adaptive parameter estimation. The performance of the proposed method is verified in comparison to the conventional voltage measurement method defined in the IEC 61400-21 standard.
Along with global efforts to reduce the carbon footprint, electrification of powertrains is occurring in various applications, certainly including transportation systems. One of the most important components is an electric energy storage system, i.e., a battery pack. Regardless of battery form factors, such as cylindrical, pouch and prismatic type, it is critical to maintain the safety of the battery module/pack by monitoring the conditions of each and every battery cell of the battery pack. It becomes even more critical as the battery cells are used over many charging and discharging cycles. Thermal runaways of the battery packs can even be triggered by a single faulty battery cell which degrades in an unexpected manner and speed compared to the neighboring battery cells, resulting in extreme fire hazards. Typically, this faulty cell with an abnormally increased internal resistance can be detected using a voltage sensor or a temperature sensor. However, in this study, instead of depending on those sensors, activities of cell balancing switching devices are used to identify a degraded cell compared to other cells in a relative manner. A currently proposed faulty cell detection algorithm was developed through multiple simulations with Matlab Simulink®, then, a simple BMS prototype was built and tested as a proof of concept.