We performed measurements of SO2 emissions with a high UV sensitive dual-camera optical system. Generally, in order to retrieve the two-dimensional SO2 emission rates of a source, e.g., the slant column density of a plume emitted by a stack, one needs to acquire four images with UV cameras: two images including the emitting stack at wavelengths with high and negligible absorption features (λon/off), and two additional images of the background intensity behind the plume, at the same wavelengths as before. However, the true background intensity behind a plume is impossible to obtain from a remote measurement site at rest, and thus, one needs to find a way to approximate the background intensity. Some authors have presented methods to estimate the background behind the plume from two emission images. However, those works are restricted to dealing with clear sky, or almost homogeneously illuminated days. The purpose of this work is to present a new approach using background images constructed from emission images by an automatic plume segmentation and interpolation procedure, in order to estimate the light intensity behind the plume. We compare the performance of the proposed approach with the four images method, which uses, as background, sky images acquired at a different viewing direction. The first step of the proposed approach involves the segmentation of the SO2 plume from the background. In clear sky days, we found similar results from both methods. However, when the illumination of the sky is non homogeneous, e.g., due to lateral sun illumination or clouds, there are appreciable differences between the results obtained by both methods. We present results obtained in a series of measurements of SO2 emissions performed on a cloudy day from a stack of an oil refinery in Montevideo City, Uruguay. The results obtained with the UV cameras were compared with scanning DOAS measurements, yielding a good agreement.
Nowadays, smartphones are in everyone’s life. Apart from being excellent tools for work and communication, they can also be used to perform several measurements of simple physical magnitudes, serving as a mobile and inexpensive laboratory, ideal for use physics lectures in high schools or universities. In this article, we use a smartphone to analyse the acoustic beat phenomena by using a simple experimental setup, which can complement lessons in the classroom. The beats were created by the superposition of the waves generated by two tuning forks, with their natural frequencies previously characterized using different applications. After the characterization, we recorded the beats and analysed the oscillations in time and frequency.
We analyze and compare two approaches for the tomographic reconstruction of trace gas distributions in the atmosphere, adapted to differential optical absorption spectroscopy (DOAS) applications. The first approach performs the inversion by solving a regularized least squares problem. Regularization is required because the retrieval of the distribution from a limited set of measurements is an ill‐posed problem. This approach does not consider the nonnegativity of the trace gas concentrations. The second approach is a new proposal that solves an optimization problem with the Laplacian of the solution as the regularization term. This approach enables the possibility of adding the nonnegativity constraint to the solution. The algorithm here is stated as an instance of a convex optimization problem and can numerically be solved using, for example, the CVX package. We test both approaches on reconstructions of simulated gas distributions and different experimental configurations applicable to Multi‐Axis DOAS and multispectral imaging measurements. From the results, we can then determine a set of reconstruction parameters appropriate to real plume measurements.
In this work we present a simple and low-cost setup to illustrate the dependence of the behaviour of a standing wave in a guitar string with the initial conditions. To do so, we impose two kinds of initial conditions; in the first instance, the initial shape of the string is varied. Secondly, different nodes are imposed on the string. This dependence was studied using the Fourier analysis of the sound produced by the vibration of the string with a smartphone. The simplicity of the proposed activity makes it suitable to be implemented in any classroom to illustrate the concept of normal modes and as an example of Fourier series in a real system that is also familiar for the students.
Biomass burning releases large amounts of aerosols and chemical species into the atmosphere, representing a major source of air pollutants. Emissions and by-products can be transported over long distances, presenting challenges in quantification. This is mainly done using satellites, which offer global coverage and data acquisition for places that are difficult to access. In this study, ground-based observations are used to assess the abundance of trace gases and aerosols. On 24 November 2020, a significant increase in formaldehyde was observed with a Multi-AXis Differential Optical Absorption Spectroscopy (MAX-DOAS) instrument located in Montevideo (Uruguay), and its vertical column densities reached values of 2.4×1016 molec. cm−2, more than twice the values observed during the previous days. This was accompanied by an increase in the aerosol levels measured by an AErosol RObotic NETwork (AERONET) photometer located at the same site. The aerosol optical depth (AOD) at 440 nm reached values close to 1, an order of magnitude larger than typical values in Montevideo. Our findings indicate that the increase was associated with the passage of a plume originating from distant biomass burning. This conclusion is supported by TROPOspheric Monitoring Instrument (TROPOMI) satellite observations as well as HYbrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) simulations. The profiles of the gases and aerosols retrieved from the MAX-DOAS observations are consistent with the HYSPLIT analysis, showing the passage of a plume over Montevideo on 24 November located at a height of ∼ 1.5 km. This corroborates the finding that biomass burning events occurring about 800 km north of Montevideo can affect the local atmosphere through long-distance emissions transport. This study underscores the potential of ground-based atmospheric monitoring as a tool for detection of such events. Furthermore, it demonstrates greater sensitivity compared to satellite when it comes to detection of relatively small amounts of carbonyls like glyoxal and formaldehyde.
We focus on the study of the processes undergone by a perfect gas when the external pressure is suddenly modified. The analysis shows that, from the second law perspective, there is a non-evident asymmetry between the processes of compression and expansion between the same pressures, which is manifested through different levels of entropy production. If the system remains in contact with a thermal reservoir during the processes this asymmetry is remarkable, since while entropy grows linearly with the relative change of pressure during the compression, the relation between those variables is logarithmic during the expansion.