The present paper offers the chance to experimentally measure, for the first time, the internal tire strain by optical fiber sensors during the tire rolling in real operating conditions. The phenomena that take place during the tire rolling are in fact far from being completely understood. Despite several models available in the technical literature, there is not a correspondently large set of experimental observations. The paper includes the detailed description of the new multi-sensing technology for an ongoing vehicle measurement, which the research group has developed in the context of the project OPTYRE. The experimental apparatus is mainly based on the use of optical fibers with embedded Fiber Bragg Gratings sensors for the acquisition of the circumferential tire strain. Other sensors are also installed on the tire, such as a phonic wheel, a uniaxial accelerometer, and a dynamic temperature sensor. The acquired information is used as input variables in dedicated algorithms that allow the identification of key parameters, such as the dynamic contact patch, instantaneous dissipation and instantaneous grip. The OPTYRE project brings a contribution into the field of experimental grip monitoring of wheeled vehicles, with implications both on passive and active safety characteristics of cars and motorbikes.
13 January 2014 in Mathematics and Mechanics of Solids
This paper considers the damping induced on a single degree-of-freedom system when it is coupled at one end of a waveguide in which waves are radiated producing an energy loss in the oscillator motion that appears as a damping effect. In general, the whole system is described by the equation of the motion of the harmonic oscillator coupled with the wave equation of the propagation field. Hiding the variable that describes the wave motion and expressing it in terms of the oscillator vibration, a new equation for the oscillator is determined. In general, a nonconventional damping effect is born from the coupling terms. This paper examines cases in which the induced damping effect is of fractional-derivative type. This point of view produces physical examples of the way that simple mechanical structural systems, familiar to engineers, can exhibit fractional damping, a concept that does not always have a clear physical interpretation.
In this work we present the results of a field trial with a FBG sensor array system for the real time monitoring of railway traffic and for the structural health monitoring of both the railway track and train wheels. The test campaigns are performed on the on the 2nd line of Milan metropolitan underground, employing more than 50 FBG sensors along 1,5 km of the rail track, where the trains are tested during daily passenger rail transport, with maximum speeds roughly of 90 km/h. The measurements were continuatively performed for over six months, with a sampling frequency of about 400 Hz. The large amount of data/sensors allow a rather accurate statistical treatment of the measurement data and permit, with dedicated algorithms, the estimation of rail and wheel wear, key traffic parameters such as the number of axles, the train speed and load, and, in the next future, the detection of localised imperfections.
12 August 2023 in Applications in Engineering Science