Different wind models are being used for the operational safety evaluation of a high-speed train exposed to crosswinds. However, the methodology for simulating natural wind is of substantial importance in the wind–train system, and different simplified forms of natural wind result in different levels of accuracy. The purpose of the research in this paper is to investigate the effects of different wind models on the operational safety evaluation of high-speed trains. First, three wind models, namely, steady wind model, gust wind model, and turbulent wind model, are constructed. Following this, the algorithms for computing the aerodynamic loads using the wind models are described. A multi-body dynamic model of a vehicle is then set up using the commercial software “Simpack” for investigating the dynamic behavior of a railway vehicle exposed to wind loads. The rollover risks corresponding to each wind model are evaluated by applying the definition of characteristic wind curves (CWC). The results indicate that the CWC computed using the gust wind model is marginally higher than that computed using the turbulent wind model; the difference is less than 1%. With regard to the steady wind model, the assurance coefficient substantially affects the final CWC. A reasonable agreement of CWC between the steady wind model and turbulent wind model can be obtained by applying an “appropriate value” of the assurance coefficient. This study included a systematic analysis of the operational safety evaluation results using different wind models; the analysis can serve as a reference basis for different engineering accuracy requirements.
7 September 2013 in Journal of Zhejiang University-SCIENCE A
With the continuous improvement of the train speed, the dynamic environment of trains turns out to be aerodynamic domination. Solving the aerodynamic problems has become one of the key factors of the high-speed train head design. Given that the aerodynamic drag is a significant factor that restrains train speed and energy conservation, reducing the aerodynamic drag is thus an important consideration of the high-speed train head design. However, the reduction of the aerodynamic drag may increase other aerodynamic forces (moments), possibly deteriorating the operational safety of the train. The multi-objective optimization design method of the high-speed train head was proposed in this paper, and the aerodynamic drag and load reduction factor were set to be optimization objectives. The automatic multi-objective optimization design of the high-speed train head can be achieved by integrating a series of procedures into the multi-objective optimization algorithm, such as the establishment of 3D parametric model, the aerodynamic mesh generation, the calculation of the flow field around the train, and the vehicle system dynamics. The correlation between the optimization objectives and optimization variables was analyzed to obtain the most important optimization variables, and a further analysis of the nonlinear relationship between the key optimization variables and the optimization objectives was obtained. After optimization, the aerodynamic drag of optimized train was reduced by up to 4.15%, and the load reduction factor was reduced by up to 1.72%.
1 April 2021 in Journal of Wind Engineering and Industrial Aerodynamics
The conventional crosswind stability analysis of high-speed trains is based on a deterministic approach with the final output being a characteristic wind curve (CWC). The CWC only provides the dividing line between the safe state and failure state of vehicles, thus it cannot be used to evaluate the overturning probability of vehicles subjected to strong winds. To overcome this shortcoming of the conventional CWC, a fuzzy stochastic approach is proposed that can make an effective assessment of the operational safety of high-speed trains exposed to stochastic winds. According to this methodology, the uncertain parameters existing in the system such as stochastic winds and aerodynamic coefficients are modelled as basic random variables, and the failure of the structure is considered as a fuzzy random event. An algorithm for computing the unsteady aerodynamic loads of high-speed trains exposed to stochastic winds is created and then the aerodynamic loads are applied to a dynamic model of the vehicle system in order to investigate the dynamic response. Importance sampling is used to conduct an analysis of the crosswind stability of high-speed trains based on fuzzy random reliability theory. This finally leads to the substitution of the conventional CWC by probabilistic characteristic wind curves (PCWCs). The conventional CWC is shown to be over-conservative, while the PCWCs can provide more significant reference for the safe operation of high-speed trains.