The mechanical properties of gas-containing coal and rock mass play important roles in controlling the occurrence and development of coal and gas outbursts. The gradual increase in mining depth will change the failure mechanism of gas-containing coal and rock mass. In order to further study the failure mechanism of gas-containing coal and rock mass, samples were taken from the gas-containing coal seam in the Wuhushan Coal Mine of the Wuhai Mining area of China. The mechanical parameters of coal samples during the failure process under different gas pressure conditions were measured and analyzed with the SAW-2000 rock mechanics testing machine, the gas-containing coal uniaxial compression device and inflation system. Meanwhile, the failure process and mechanical parameters of coal samples under different gas pressure were simulated by RFPA^2D gas plate numerical simulation software. The results show that with increasing gas pressure in the coal there is decrease in Compressive strength, Elastic modulus, Strain, Peak strength and Bearing capacity and increase in Poisson’s ratio. When the failure state appears in the coal, the cracks are longer and wider, more random cracks are genareted, and the damage degree of the coal is greater. The numerical analysis’ results are in good agreement with experimental results. The research results are applicable to the gas bearing coal with the same or similar gas geological conditions. The tests can be carried out repeatedly and reasonable results can be obtained according to the physical and mechanical parameters of the actual coal seam and the occurrence of gas. On this basis, physical experiments and numerical simulations of triaxial compression can also be carried out to further study the mechanical characteristics of deformation and the failure of gas-containing coal under gas pressure and provide technical support for revealing the mechanism of coal and gas outbursts.

The heating industries are extremely dispersed in China, and most heating enterprises are small in scale, poor in foundation, and chaotic in safety management. The construction method of the double prevention mechanism of heating enterprises in China was analyzed and studied based on the PDCA cycle model and the improved risk assessment method for operating conditions. The analytic hierarchy process was used to determine the weight of dangerous and harmful factors and corresponding control measures for an accident type. The concept of “failure frequency” was introduced, and the calculation method of accident probability (L) was modified so that the accurate hierarchical control and dynamic risk assessment of accident risks can be realized. At the same time, the failure of control measures is defined as “hidden danger” in this paper. Finally, the bidirectional dynamic transmission mechanism of hidden danger investigation and treatment and risk hierarchical control was established. The main problems existing in the construction of double prevention mechanism of heating enterprises in China were discussed and some countermeasures and suggestions were put forward. According to the above methods and steps, the double prevention mechanism of heating enterprises can be reasonably established. Thus, the risks can be effectively identified, the hidden dangers can be controlled, and the safety production of heating enterprises can be guaranteed.