There are abundant granite reserves in China, but the adhesion between granite and asphalt is poor, and there are problems such as insufficient water stability, which seriously restrict the application and promotion of granite in asphalt pavement. In order to improve the adhesion between granite and asphalt, as well as the water stability of asphalt mixture, amines and polymers were selected as anti-stripping agents. First, silane coupling agent modified asphalt (SCAMA), rock asphalt modified asphalt (RMA), SBS modified asphalt (SBS), and double rock composite modified asphalt (SCA&RMA) were produced; the modification effect of different anti-stripping modified asphalts was evaluated. Then, the adhesion of different types of asphalts and granite aggregates before and after aging was evaluated by time-delayed water immersion method. Finally, AC-10 and AC-16 granite–asphalt mixtures were designed, through indoor performance test and 1/3 scale accelerated loading test, evaluating the improvement effect of granite–asphalt mixture on pavement performance. The results show that the asphalt modified by amine or organic polymers anti-stripping agent could significantly improve the adhesion between granite and asphalt. The Hamburg wheel-tracking test failed to fully reflect the whole process of high-temperature rutting failure. When evaluating the high-temperature performance and water stability of asphalt mixtures, it is recommended that the evaluation method should cover the whole failure stage of asphalt mixtures; considering the coupling effect of water and high temperature, the order of water stability of granite–asphalt mixture is proposed as follows: SCA&RMA > RMA > SBS > SCAMA > 70-A, and SCA&RMA has the best modification effect.
The phenomenon of structural destabilization damage to asphalt pavement is becoming increasingly serious as a result of high temperatures and heavy traffic. Considering the advantages of Qingchuan rock asphalt (QRA) in its durability, high-temperature rutting resistance, and good compatibility with asphalt, it was proposed to compound rock asphalt with SBS to ameliorate the high-temperature performance of asphalt. In this study, DSR and BBR were used to determine the rheological properties of Qingchuan rock-modified asphalt (QRMA) and Qingchuan rock–SBS-modified asphalt (QRA-SBSMA), and the optimum blending amount of rock asphalt was determined based on the PG classification results. Secondly, four different structures of ‘30 mm AC-10 upper layer (70-A, QRMA, SBSMA, QRA-SBSMA) + 50 mm AC-16 lower layer (70-A)’ double-layer composite specimens were prepared. Multiple high-temperature performance evaluation indexes (G*/sinδ, Ds, rutting depth, micro-strain, Fn, modulus) were used to assess the improvement effect of QRA. Finally, using a 1/3 scale accelerated loading testing machine, we simulated high-temperature, water, and high-temperature coupled environments to assess the impact of high temperature and water on the performance of QRMA and QRA-SBSMA, respectively. The findings demonstrated that QRA can increase the PG classification of 70-A and SBSMA as well as its resistance to high-temperature deformation. Multi-index comprehensive evaluation methods were used to consummate the asphalt high-temperature evaluation system. The QRA-SBSMA had the smallest rutting depth and creep rate and the largest dynamic modulus, characterizing its ability to optimally resist high-temperature rutting and deformation.
Granite is very widely distributed in the world, but granite is an acidic aggregate with poor adhesion to asphalt. In untreated asphalt mixtures, asphalt pavement water damage and loose disease are more prominent, affecting the service life of the pavement and service level. Enhancing the road performance of granite asphalt mixture generally improves the adhesion properties of asphalt and granite. Qingchuan rock asphalt, anti-stripping agent KH5, aliphatic amine anti-stripping agent AJ-1 and two groups of the composite anti-stripping agents were used to modify the asphalt and analyze the effect of different anti-stripping agents on the improvement of asphalt-granite aggregate adhesion properties based on the surface free energy (SFE) theory. Second, the effect of anti-stripping agents on the rheological properties of asphalt were analyzed by rheological tests, and the modification effect of granite asphalt mixture road performance was evaluated by Marshall tests. The aging of asphalt and asphalt mixture was simulated by thermal oxygen aging, and the durability of different anti-stripping agents was investigated by comparing the performance of asphalt and asphalt mixtures before and after aging. The results showed that Qingchuan rock asphalt can effectively enhance the high-temperature stability and anti-aging properties of asphalt mixes, but the low temperature performance was relatively poor. KH5 and AJ-1 can make up for the lack of low temperature performance of rock asphalt, but the water stability of asphalt mixes decreases after aging. All five groups of anti-stripping agents improve the adhesion of granite-asphalt and the water stability of the asphalt mixture to some extent. Considering the aging effect, the order of granite-asphalt mixture water stability is: KH/RAMA > AJ/RAMA > RAMA > KHMA > AJMA.
After aging, the adhesiveness of asphalt deteriorates, leading to a reduction in the durability of asphalt mixtures and affecting the service life of asphalt pavements. To enhance the anti-aging performance of asphalt, this study employed the method of melt blending to prepare three types of modified asphalt: graphene/SBS modified asphalt (G/SBSMA), crumb rubber/SBS modified asphalt (CR/SBSMA), and petroleum resin/SBS modified asphalt (PR/SBSMA). Different dosages of the three types of modified asphalt were tested for changes in conventional performance indicators. The optimal dosages of graphene, crumb rubber, and C9 petroleum resin were determined to be 2%, 15%, and 5%, respectively. Based on the theory of surface free energy, the effects of anti-aging agents on the microscopic properties of SBS modified asphalt before and after aging were analyzed using the three-liquid method. The mechanisms of strength attenuation at the asphalt–aggregate interface under water exposure and aging were revealed. The results showed that with the increase of aging gradient, the asphalt-aggregate biphasic system became more active. The cohesive energy and peel energy of SBS modified asphalt increased continuously, while the adhesive energy decreased continuously, leading to a decrease in the energy ratio parameter. Resin-based anti-aging agents exhibited the most significant improvement in asphalt adhesion performance, while graphene demonstrated a more stable enhancement in asphalt’s water stability during the aging stage.
USP (usual temperature pitch)-modified asphalt optimizes its rheological properties through reactions between the modifier and the asphalt. This significantly enhances the high- and low-temperature adaptability and environmental friendliness of asphalt. It has now become an important research direction in the field of highway engineering. This article systematically investigates the impact of different dosages of USP warm mix modifier on asphalt binders through rheological and microstructural analysis. Base asphalt and SBS-modified asphalt were blended with USP at varying ratios. Conventional tests (penetration, softening point, ductility) were combined with dynamic shear rheometry (DSR, AASHTO T315) and bending beam rheometry (BBR, AASHTO T313) to characterize temperature/frequency-dependent viscoelasticity. High-temperature performance was quantified via multiple stress creep recovery (MSCR, ASTM D7405), while fluorescence microscopy and FTIR spectroscopy elucidated modification mechanisms. Key findings reveal that (1) optimal USP thresholds exist at 4.0% for base asphalt and 4.5% for SBS modified asphalt, beyond which the rutting resistance factor (G*/sin δ) decreases by 20–31% due to plasticization effects; (2) USP significantly improves low-temperature flexibility, reducing creep stiffness at −12 °C by 38% (USP-modified) and 35% (USP/SBS composite) versus controls; (3) infrared spectroscopy displays that no new characteristic peaks appeared in the functional group region of 4000–1300 cm−1 for the two types of modified asphalt after the incorporation of USP, indicating that no chemical changes occurred in the asphalt; and (4) fluorescence imaging confirmed that the incorporation of USP led to disintegration of the spatial network structure of the control asphalt, explaining the reason for the deterioration of high-temperature performance.
As a new binder, polyurethane (PU) is used to overcome the poor durability of porous pavement. This study focuses on the fatigue performance of a porous polyurethane mixture (PPM) under immersion conditions and compares it with a porous asphalt mixture (PAM). The results showed that under the immersion conditions, the initial stiffness of the PPM decreased by approximately 50%. However, the initial stiffness of the PAM was almost unaffected by the immersion conditions. In addition, the PPM exhibited a longer fatigue life under immersion conditions. In comparison, the fatigue life of the PAM decreased. The cracking propagation rate of the PPM decreased under immersion conditions, while the cracking propagation rate of the PAM increased. The fatigue termination condition for the PPM was set to S1 = 0.45S0 (S0 is the initial stiffness, and S1 is the termination stiffness), and that of the PAM was set to S1 = 0.4S0. Compared to the Weibull function, the Chaboche function provides a more accurate description of fatigue damage in the PPM and PAM. From the obtained data, it can be inferred that the fatigue performance of the PPM is far superior to that of the PAM. Therefore, polyurethane has broad application prospects in long-life permeable pavements.