A series of cobalt ferrite thin films was prepared via pulsed spray evaporation chemical vapour deposition (PSE-CVD). The samples were comprehensively characterised in terms of structure, surface, morphology, and optical and redox properties. Both X-ray diffraction (XRD) and Raman analysis show that all samples exhibited an inverse spinel structure. X-ray photoelectron spectroscopy (XPS) results indicate that the films were mainly composed of Co, Fe and O species, and an increase in the Co : Fe ratio with Fe substitution by Co was observed. Helium ion microscopy (HIM) images show the film morphology to be dependent on the Co : Fe ratio. The investigation of the optical property using ultraviolet-visible spectroscopy reveals that the increase in the Co content results in an increase in the band gap energy. In situ emission FTIR spectroscopy was used to evaluate the redox properties of the samples, and a shift of the redox temperature to higher values was observed upon increase in the Co content. The effect of Fe substitution by Co in the mixed oxide systems on their catalytic performance for CO oxidation was investigated. Co–Fe oxides exhibit substantially better catalytic performance than the single α-Fe2O3. The catalytic performance of the Co–Fe oxides towards CO oxidation was discussed with respect to the participation of surface and lattice oxygen in the oxidation process. According to XPS and temperature-programmed reduction/oxidation (TPR/TPO) results, a suprafacial mechanism where CO molecules react with surface-adsorbed oxygen functions to form CO2 was proposed as the dominant mechanism.
In situ emission and absorption FTIR methods were employed to characterize the spatially resolved structure of binary Co–Cu oxides for low-temperature oxidation of CO and propene. Co–Cu oxide catalysts were controllably synthesized by pulsed-spray evaporation chemical vapor deposition. XRD, FTIR, XPS, UV-vis and helium ion microscopy (HIM) were employed to characterize the as-prepared thin films in terms of structure, composition, optical and thermal properties as well as morphology. In situ emission FTIR spectroscopy indicates that Co 3 O 4 , CuCo 2 O 4 and CuO are thermally stable at 650, 655 and 450 °C, respectively. The catalytic tests with absorption FTIR display that the involvement of Co–Cu oxides can initiate CO and C 3 H 6 oxidation at lower temperatures. The results indicate that in situ emission and absorption FTIR are useful techniques to explore the thermal properties and catalytic performance of functional materials, allowing many potential applications in tailoring their temporally and spatially resolved structure-property relationships.
3 February 2025 in Environmental Chemistry Letters
The aviation sector is a major emitter of fossil fuel-derived carbon dioxide contributing to global warming. For instance, jet fuel consumed by the aviation industry is 1.5–1.7 billion barrels per year, resulting in 705 million metric tons of carbon dioxide emissions. Aircraft manufacturers have set ambitious goals, aiming for carbon-free growth post-2020 and a 50% reduction in greenhouse gas emissions by 2030. This issue can be solved by replacing fossil fuels with biofuels produced from modern biomass, thus meeting the carbon neutral objective. Here, we review the technologies to convert biomass into jet biofuel with focus on reactants, catalysts, and the chemistry of combustion. Reactants include alcohols, oil, esters, fatty acids, gas and sugars. Catalysts include Fischer–Tropsch catalysts, palladium, platinum, ruthenium, nickel, and molybdenum. The utilization of jet biofuels could potentially reduce greenhouse gas emissions by up to 80%. We also discuss economic implications.
28 March 2022 in Industrial & Engineering Chemistry Research