As modern devices and systems continue to advance, device wear remains a key factor in limiting their performance and lifetime, as well as environmental and health effects. Traditional approaches often rely on wear prediction based on physical models, but due to device complexity and uncertainty, these methods often fail to provide accurate predictions and accurate wear identification. Machine learning, as a data-driven approach based on its ability to discover patterns and correlations in complex systems, has enormous potential for monitoring and predicting device wear. Here, we review recent advances in applying machine learning for predicting the wear of mechanical components. Machine learning for wear prediction shows significant potential in optimizing material selection, manufacturing processes, and equipment maintenance, ultimately enhancing productivity and resource efficiency. Successful implementation relies on careful data collection, standardized evaluation methods, and the selection of effective algorithms, with artificial neural networks (ANNs) frequently demonstrating notable success in predictive accuracy.

Hybrid electric vehicles (HEVs) are set to play a critical role in the future of the automotive industry. To operate efficiently, HEVs require a robust energy management strategy (EMS) that decides whether the vehicle is powered by the engine or electric motors while managing the battery’s state of charge. The EMS must rapidly adapt to driver demands and optimize energy usage, ideally predicting battery charge rates and fuel consumption to adjust the powertrain in real time, even under unpredictable driving conditions. As HEVs become more prevalent, EMS technologies will advance to improve predictive capabilities. This analysis provides an overview of current EMS systems, including both rule-based and optimization-based approaches. It explores the evolution of EMS development through a technology roadmap, highlighting the integration of advanced algorithms such as reinforcement learning and deep learning. The analysis addresses the technologies that underly this evolution, including machine learning, cloud computing, computer vision, and swarm technology. Key advances and challenges in these technologies are discussed, along with their implications for the next generation of EMS systems for HEVs. The analysis of these technologies indicates that they will play a key role in the evolution of EMS technology, allowing it to better optimize driver needs and fuel economy.

The rapid growth and widespread availability of technology has allowed enemies to dynamically develop countermeasures to military systems. Therefore, it is imperative that military systems be designed to account for these countermeasures. As such, technology roadmapping should be a critical activity in the acquisition of defense systems. Technology roadmaps provide a strategic vision for a system that accounts for the operational context, including evolving needs and technology changes. However, the operational context can be difficult to predict. This article suggests using wargaming coupled with combat simulation to better understand the operational context to allow for testing and refining technology roadmaps. Wargaming requires teams to roleplay friendly and enemy units to determine how each side adapts with the implementation of a new military system. Computer-based simulations can then convert the qualitative results from the wargame into quantitative metrics that further inform the roadmap. A case study is presented for a technology roadmap associated with an armored exoskeleton. Wargaming forecasted the countermeasures implemented by the enemy and the associated responses. The wargame results were coupled with models to quantitatively forecast the change in the warfighter's survivability and lethality. The wargame was then used to inform the technology roadmap.

Recent advances in all-solid-state battery (ASSB) research have significantly addressed key obstacles hindering their widespread adoption in electric vehicles (EVs). This review highlights major innovations, including ultrathin electrolyte membranes, nanomaterials for enhanced conductivity, and novel manufacturing techniques, all contributing to improved ASSB performance, safety, and scalability. These developments effectively tackle the limitations of traditional lithium-ion batteries, such as safety issues, limited energy density, and a reduced cycle life. Noteworthy achievements include freestanding ceramic electrolyte films like the 25 μm thick Li_0.34La_0.56TiO₃ film, which enhance energy density and power output, and solid polymer electrolytes like the polyvinyl nitrile boroxane electrolyte, which offer improved mechanical robustness and electrochemical performance. Hybrid solid electrolytes combine the best properties of inorganic and polymer materials, providing superior ionic conductivity and mechanical flexibility. The scalable production of ultrathin composite polymer electrolytes shows promise for high-performance, cost-effective ASSBs. However, challenges remain in optimizing manufacturing processes, enhancing electrode-electrolyte interfaces, exploring sustainable materials, and standardizing testing protocols. Continued collaboration among academia, industry, and government is essential for driving innovation, accelerating commercialization, and achieving a sustainable energy future, fully realizing the transformative potential of ASSB technology for EVs and beyond.

Vibration-based predictive maintenance is an essential element of reliability engineering for modern automotive powertrains including internal combustion engines, hybrids, and battery-electric platforms. This review synthesizes advances in sensing, signal processing, and artificial intelligence that convert raw vibration into diagnostics and prognostics. It characterizes vibration signatures unique to engines, transmissions, e-axles, and power electronics, emphasizing order analysis, demodulation, and time–frequency methods that extract weak, non-stationary fault content under real driving conditions. It surveys data acquisition, piezoelectric and MEMS accelerometry, edge-resident preprocessing, and fleet telemetry, and details feature engineering pipelines with classical machine learning and deep architectures for fault detection and remaining useful life prediction. In contrast to earlier reviews focused mainly on stationary industrial systems, this review unifies vibration analysis across combustion, hybrid, and electric vehicles and connects physics-based preprocessing to scalable edge and cloud implementations. Case studies show that this integrated perspective enables practical deployment, where physics-guided preprocessing with lightweight models supports robust on-vehicle inference, while cloud-based learning provides cross-fleet generalization and model governance. Open challenges include disentangling overlapping sources in compact e-axles, coping with domain and concept drift from duty cycles, software updates, and aging, addressing data scarcity through augmentation, transfer, and few-shot learning, integrating digital twins and multimodal fusion of vibration, current, thermal, and acoustic data, and deploying scalable cloud and edge AI with transparent governance. By emphasizing inverter-aware analysis, drift management, and benchmark standardization, this review uniquely positions vibration-based predictive maintenance as a foundation for next-generation vehicle reliability.

In gasoline engines, the combustion process involves a flame’s propagation from the spark plug to the cylinder walls, resulting in the localized heating and pressurization of the cylinder content ahead of the flame, which can lead to the autoignition of the gasoline and air. The energy release from the autoignition event causes the engine cylinder to resonate, causing an unpleasant noise and eventual engine damage. This process is termed as knock. Avoiding knock has resulted in limiting the maximum engine pressures, and hence limiting the maximum efficiencies of the engine. Modern engines employ knock sensors to detect resonances, adjusting the spark plug timing to reduce pressures and temperatures, albeit at the expense of engine performance. This paper sets out to review the different signals that can be measured from an engine to detect the start of knock. These signals traditionally consist of the in-cylinder pressure, the vibrations of the engine block, and acoustic noise. This paper reviews each of these techniques, with a focus on recent advances. A number of novel methods are also presented, including identifying perturbations in the engine speed or exhaust temperature; measuring the ion charge across the spark plug leads; and using artificial intelligence to build models based on engine conditions. Each of these approaches is also reviewed and compared to the more traditional approaches. This review finds that in-cylinder pressure measurements remain as the most accurate for detecting knock in modern engines; however, their usage is limited to research settings. Meanwhile, new sensors and processing techniques for vibration measurements will more accurately detect knock in modern vehicles in the short term. Acoustic measurements and other novel approaches are showing promise in the long term.