A nano-dual-phase powder with ultra-fine grain size was synthesized by the liquid precursor method at 1200 °C. A series of single-phase high-entropy ceramic powders ((Ti, Zr, Hf, Nb)B₂, (Ti, Zr, Hf, Nb, Ta)B₂, (Ti, Zr, Hf, Nb, Mo)B₂, (Ti, Zr, Hf, Nb, Ta, Mo)B₂) with high purity (C content less than 0.9 wt% and O content less than 0.7 wt%) and ultrafine (average grain sizes of 340–570 nm) were successfully synthesized at 1800 °C. The sample of (TiZrHfNbTa)B₂ exhibited a hexagonal close-packed (HCP) structure, and the metal elements were uniformly distributed at the nanoscale, microscale, and macroscale. This method did not apply to the preparation of all high-entropy ceramic powders and was unfavorable for the formation of single-phase high-entropy borides when the size difference factor exceeded 3.9%. The present work provides a guide for the development of ceramic-based composites through precursor impregnation pyrolysis.

Aerospace vehicle connection constructions are in urgent need of joint structures with excellent aerodynamic profiles and environmental adaptability. To address issues such as poor aerodynamic profile, material thermal expansion coefficient mismatch, and limited joint structure evaluation indexes, a multi-bolt, countersunk C/SiC composite joint structure is presented in this study. The development of a 3D Hashin progressive damage model and its dedicated solver code is presented. The validity of the model is confirmed by comparing simulation results with experimental data. Three evaluation indexes are proposed, peak load, weight increment efficiency, and bolt load distribution, to thoroughly evaluate the mechanical performance of multi-bolt, countersunk C/SiC composite joint structures. Using the proposed model and evaluation indices, we evaluate sixteen different designs of multi-bolt, countersunk C/SiC composite joint structures and analyze how design parameters affect their mechanical properties and damage patterns. The results show that the best mechanical properties of the joint structure are achieved when the ratio of bolt pitch to through hole diameter is 3, the ratio of bolt spacing between columns to through hole diameter is 4, the ratio of the distance between the free edge of the substrate to through hole diameter is 1.5, the ratio of through hole diameter to specimen thickness is 1.7, and the ratio of the distance between the edge of the substrate to through hole diameter is 1.5.

Molecular simulations are currently receiving significant attention for their ability to offer a microscopic perspective that explains macroscopic phenomena. An essential aspect is the accurate characterization of molecular structural parameters and the development of realistic numerical models. This study investigates the surface morphology and elemental distribution of silicon nitride fibers through TEM and EDS, and SEM and EDS analyses. Utilizing a customized molecular dynamics approach, molecular models of amorphous and multi-interface silicon nitride fibers with complex structures were constructed. Tensile simulations were conducted to explore correlations between performance and molecular structural composition. The results demonstrate successful construction of molecular models with amorphous, amorphous–crystalline interface, and mixed crystalline structures. Mechanical property characterization reveal the following findings: (1) The nonuniform and irregular amorphous structure causes stress concentration and crack formation under applied stress. Increased density enhances material strength but leads to higher crack sensitivity. (2) Incorporating a crystalline reinforcement phase without interfacial crosslinking increases free volume and relative tensile strength, improving toughness and reducing crack susceptibility. (3) Crosslinked interfaces effectively enhance load transfer in transitional regions, strengthening the material’s tensile strength, while increased density simultaneously reduces crack propagation.

In this work, a novel ceramic precursor containing boron, silicon, and nitrides (named SiBCN) was synthesized from liquid ceramic precursors. Additionally, its pyrolysis, microstructure, and chemical composition were studied at 1600 °C. The results showed that the samples with different boron contents had similar structural composition, and both of the two precursors had stable amorphous SiBN structures at 1400 °C, which were mainly composed of B-N and Si-N and endowed them with excellent thermo-oxidative stability. With the progress of the heating process, the boron contents increased and the structures became more amorphous, significantly improving the thermal stability of the samples in high-temperature environments. However, during the moisture treatment, the introduction of more boron led to worse moisture stability.

This study presents the development and validation of an elementary reaction pathway tracking algorithm based on reactive force field simulations, enabling the dynamic monitoring of cracking products at the 20,000-atom scale, the accurate identification of chain reaction pathways, and the comprehensive tracking of large carbon chain formation. The research demonstrates that the differences between methane and propylene cracking–polymerization reactions primarily stem from disparities in bond dissociation energies, radical stabilities, and molecular topologies, and the operation of molecular dynamics relies on LAMMPS 3 March 2020. The cracking pathway of methane is relatively straightforward, predominantly involving the homolytic cleavage of C–H bonds, followed by radical chain propagation leading to the formation of large carbonaceous species. In contrast, propylene, owing to its unsaturated structure and multiple reactive sites, exhibits more complex reaction networks and a wider diversity of products. Furthermore, the study elucidates the reaction pathways of intermediate species during methane and propylene cracking and investigates the effect of reaction temperature on carbon sheet development. In conclusion, the algorithm established in this work offers a detailed mechanistic insight into the gas-phase cracking of methane and propylene, providing a new theoretical basis for the optimization of gas-phase deposition processes and the rational design of carbon-based materials.