Shikhar Verma

Dr. Shikhar Verma


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 April 2017 in IEEE Communications Surveys & Tutorials
Verified
Journal Article
Closed access
SVShikhar Verma
Shikhar Verma
YKYuichi Kawamoto
Yuichi Kawamoto
ZFZubair Md. Fadlullah
Zubair Md. Fadlullah
HNHiroki Nishiyama
Hiroki Nishiyama
NKNei Kato
Nei Kato
With the widespread adoption of the Internet of Things (IoT), the number of connected devices is growing at an exponential rate, which is contributing to ever-increasing, massive data volumes. Real-time analytics on the massive IoT data, referred to as the “real-time IoT analytics” in this paper, is becoming the mainstream with an aim to provide an immediate or non-immediate actionable insights and business intelligence. However, the analytics network of the existing IoT systems does not adequately consider the requirements of the real-time IoT analytics. In fact, most researchers overlooked an appropriate design of the IoT analytics network while focusing much on the sensing and delivery networks of the IoT system. Since much of the IoT analytics network has often been taken as granted, the survey, in this paper, we aim to review the state-of-theart of the analytics network methodologies, which are suitable for real-time IoT analytics. In this vein, we first describe the basics of the real-time IoT analytics, use cases, and software platforms, and then explain the shortcomings of the network methodologies to support them. To address those shortcomings, we then discuss the relevant network methodologies which may support the real-time IoT analytics. Also, we present a number of prospective research problems and future research directions focusing on the network methodologies for the real-time IoT analytics.

19 December 2023 in IEEE Communications Surveys & Tutorials
Verified
Journal Article
Closed access
SVShikhar Verma
Shikhar Verma
TRTiago Koketsu Rodrigues
Tiago Koketsu Rodrigues
YKYuichi Kawamoto
Yuichi Kawamoto
Mostafa M. FoudaMostafa M. Fouda
Mostafa M. Fouda
NKNei Kato
Nei Kato
Recent advancements in wireless local area network (WLAN) technology include IEEE 802.11be and 802.11ay, often known as Wi-Fi 7 and WiGig, respectively. The goal of these developments is to provide Extremely High Throughput (EHT) and low latency to meet the demands of future applications like as 8K videos, augmented and virtual reality, the Internet of Things, telesurgery, and other developing technologies. IEEE 802.11be includes new features such as 320 MHz bandwidth, multi-link operation, Multi-user Multi-Input Multi-Output, orthogonal frequency-division multiple access, and Multiple-Access Point (multi-AP) coordination (MAP-Co) to achieve EHT. With the increase in the number of overlapping APs and inter-AP interference, researchers have focused on studying MAP-Co approaches for coordinated transmission in IEEE 802.11be, making MAP-Co a key feature of future WLANs. Moreover, similar issues may arise in EHF bands WLAN, particularly for standards beyond IEEE 802.11ay. This has prompted researchers to investigate the implementation of MAP-Co over future 802.11ay WLANs. Thus, in this article, we provide a comprehensive review of the state-of-the-art MAP-Co features and their shortcomings concerning emerging WLAN. Finally, we discuss several novel future directions and open challenges for MAP-Co.

18 December 2020 in IEEE Internet of Things Journal
Verified
Journal Article
Closed access
SVShikhar Verma
Shikhar Verma
YKYuichi Kawamoto
Yuichi Kawamoto
NKNei Kato
Nei Kato
Despite unprecedented advancements, wireless local area network (WLAN) technologies for the Internet of Things (IoT), such as IEEE 802.11ah (i.e., WiFi-HaLow), are prone to serious security threats, owing to their constrained computational and memory resources, which limit the use of heavyweight intrusion protection and security protocols. To address this problem, security administrators (sec-admins) must perform regular and comprehensive vulnerability assessments of IoT devices. An Internet-wide port scan (IWPS) is the initial step. However, the medium access control mechanism of IEEE 802.11ah, designed specifically for heterogeneous IoT traffic and low-power operations, can degrade network performance in the case of traditional port-scan traffic. Moreover, Internet-security (IPSec) protocol support is mandatory for IPv6-enabled IoT devices to ensure data confidentiality, integrity, and availability. Although the objective of a port scan is to improve IoT security, the resultant network performance can adversely affect IPSec services. Therefore, in this study, we optimize the IWPS to maximize the IoT security over IEEE 802.11ah WLAN. To this end, we propose novel mathematical models to evaluate IoT security based on port-scan network performance and IPsec services, which derives an optimal scan rate for sec-admins. The effectiveness of the proposed framework is verified by comprehensive numerical analysis, which shows that our approach minimizes the risk to IoT devices while probing them at an optimal scan rate.

4 December 2023 in IEEE Internet of Things Journal
Verified
Journal Article
Closed access
YKYuichi Kawamoto
Yuichi Kawamoto
MTMasaki Takahashi
Masaki Takahashi
SVShikhar Verma
Shikhar Verma
NKNei Kato
Nei Kato
HTHiroyuki Tsuji
Hiroyuki Tsuji
AMAmane Miura
Amane Miura
Satellite communication is increasingly essential and widely used, especially with the rapid development of the Internet of Things (IoT) and networks beyond fifth-generation (B5G), providing ubiquitous coverage. However, the current reactive approaches to optimize resources have become inadequate due to the massive rise in IoT traffic with varying patterns and limited resources of satellite networks. These approaches fail to predict dynamic traffic and its requirements. To efficiently allocate satellite communication resources as necessary, there is a need to proactively predict traffic demand. We propose utilizing mobile edge computing-enabled high altitude platform stations (HAPS) to predict traffic from ground users to satellite networks at HAPS. However, resource control based on traffic prediction in satellite networks faces challenges such as the wastage of resources or insufficient resource availability due to misaligned traffic variations and resource control timing. To overcome these challenges, we propose a dynamic scheduling strategy for resource control based on traffic demand prediction. This strategy aims to reduce resource wastage in satellite communication systems. Our proposed approach can predict traffic with high accuracy and allocate resources with minimal difference between achievable throughput and required throughput, demonstrating high resource utilization. We evaluated the effectiveness of our scheduling strategy through simulation analysis by comparing it with periodic resource control.

15 July 2019 in IEEE Internet of Things Journal
Verified
Journal Article
Closed access
SVShikhar Verma
Shikhar Verma
YKYuichi Kawamoto
Yuichi Kawamoto
NKNei Kato
Nei Kato
The latest evolution of cellular technologies, i.e. 5G including Long Term Evolution-Advanced (LTE-A) Pro and 5G new radio promises enhancement to mobile technologies for the Internet of Things (IoT). Despite 5G’s vision to cater to IoT, yet some aspects of it are still optimized for Human-to-Human (H2H) communication. More specifically, the existing group paging mechanism in LTE-A Pro has not yet clearly defined approaches to group Mobile IoT Devices (MIDs) having diverse characteristics such as Discontinuous Reception (DRX) and Data Transmission Frequency (DTF) with various mobility patterns. Inappropriate grouping of MIDs may lead to increased energy consumption and degraded quality of service, especially in terms of packet arrival delay (PAD) and packet loss rate (PLR). Therefore, in this paper, we devise novel models to estimate PAD, PLR and energy consumption for MIDs, specifically for the group paging mechanism. Based on the proposed models, we formulate an optimization problem with the objective to minimize energy consumption of MIDs while providing required PAD and PLR. The non-linear convex optimization problem addressed herein is solved using the Lagrangian approach, and the Karush-Kuhn-Tucker conditions have been applied to derive optimal characteristics for MIDs to join the group, namely DRX and DTF. Extensive numerical results presented verify the effectiveness of the proposed method, and the mathematical models demonstrate the superiority of our proposed approach over random grouping approach concerning significant energy consumption of MIDs.

3 December 2021 in IEEE Internet of Things Journal
Verified
Journal Article
Closed access
SVShikhar Verma
Shikhar Verma
YKYuichi Kawamoto
Yuichi Kawamoto
NKNei Kato
Nei Kato
The Internet of Things (IoT) has created acute network security concerns owing to their weak protocols and limited system resources. Vulnerable IoT devices increase the risk of compromising other devices connected to the network. Hence, vulnerability and risk assessments are necessary for IoT devices. Correspondingly, the Internet-wide port scan (IWPS) technique has garnered significant attention for its ability to discover and probe Internet-wide connected IoT devices. However, IWPS performance depends on the end wireless local area network (WLAN) state (e.g., congestion and signal-to-interference-plus-noise ratio). Scans oblivious to such dynamic WLAN factors can cause probe packet loss while increasing port-scan delays, which reduces the discovery rate, which misses the point of network security. Therefore, in this study, we propose a novel holistic approach to identifying WLAN environmental states based on round-trip time and probe-packet responses. To demonstrate the effectiveness of the proposed approach, we perform extensive experiments on real WLAN environments with various devices. The accuracy of the estimated states was validated at greater than 90% by analyzing the captured probe data at each WLAN.