The variation in road cross slope with service life affects the pavement drainage and has an adverse effect on vehicle operation safety. This paper describes a cross-slope variation prediction method influenced by the coupling effect of traffic load and soil consolidation, considering characteristics of embankment to cover the shortage for insufficient consideration of compacted embankment. First, the traffic load-induced settlement equation of a highway on soft soil foundation was introduced, which considers the effects of traffic load stress, confining pressure, soil structure, strength weakening and cyclic loading times on different positions along the cross-section. Then, the finite element model of a highway on soft soil foundations under soil consolidation is established, considering the influence of soil seepage. Finally, predictions of long-term settlement and cross-slope variation generated by coupling action of traffic load and soil consolidation were carried out with contrastive analysis with measured data. We find the following: (1) the long-term settlement was mostly from the consolidation of natural soft subsoil, while the cross-slope variation was mainly affected by traffic load; (2) variation in the cross slope of highway in soft soil areas mainly occurs within 1 year of operation. The effect of passenger cars and trucks on cross-slope variation shows diametrically opposite results, as the passenger car lane decreases while the truck lane increases; (3) the relative error of the cross-slope variation prediction results with the measured data are 2.86% and 2.5% for the left and right lane cross slopes, respectively.
Although road horizontal curves are high-risk sections for accidents, current road safety assessments often neglect the dynamic evolution of superelevation and the friction factor. The connotation for road safety level was clarified by examining the significance of road factors in traffic safety through the systemic characteristics of roads. Among these characteristics, curve safety level is determined by the ratio of the supply and demand of the lateral friction factor. On the basis of international standards and specifications, this study clarified the design supply and demand of friction factors for curve by considering the distribution of tangential and lateral friction factors. Expanding on the steady-state bicycle model while accounting for road geometric parameters and vehicle operation characteristics, the lateral friction factor demanded for vehicles was quantified. Meanwhile, the characteristics of the friction factor supplied and the superelevation variation were analyzed by using the road service life as a variable, along with their influence on the actual supply of the friction factor and the curve safety level. The results of the analysis indicate a rapid decrease in curve safety level during the first two years of road utilization, followed by a slower declining trend, with a significant 27% reduction in curve safety level by the end of the second year. Furthermore, the decline in the curve safety level is mainly attributed to variations in the road surface friction factor, whereas the influence of superelevation variation on the curve safety level is restricted. In the absence of maintenance interventions, the curve safety level will decrease by over 30% after three years of operation. Controlling operational speed is one of the effective measures for ensuring traffic safety. Meanwhile, the impact of the friction factor and the superelevation variation on the curve safety level accumulates over time, thus causing drivers to have difficulty perceiving these alterations. Therefore, dynamic safety evaluations that account for the fluctuation in the friction factor and superelevation induced by repetitive vehicle loading must be undertaken.