Sakhob Khumkoa

Dr. Sakhob Khumkoa

Suranaree University of Technology, Nakhon Ratchasima, Thailand
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 November 2024 in ACS Omega
Verified
Journal Article
Open access
NWNatcha Wongnaree
Natcha Wongnaree
TPTapany Patcharawit
Tapany Patcharawit
TYTanongsak Yingnakorn
Tanongsak Yingnakorn
Sakhob KhumkoaSakhob Khumkoa
Sakhob Khumkoa
This study aimed to investigate the leaching kinetics of valuable metals contained in the calcined black mass derived from the incineration of spent lithium-ion battery (LIB) modules. The effects of sulfuric acid (H2SO4) concentration (0.5-3 M), hydrogen peroxide (H2O2) concentration (0.5-2.0 vol %), solid/liquid (S/L) ratio (25-75 g/L), leaching time (10-120 min), and leaching temperature (30 °C-70 °C) on metal leaching efficiency from black mass were investigated. The optimal leaching conditions were achieved with 1 M H2SO4, 1 vol % H2O2, and a S/L ratio of 50 g/L at 60 °C for 60 min. Under these conditions, Li, Ni, and Mn had leaching efficiencies of 100%, with Co at 97.17%, respectively. An investigation of the leaching kinetics utilizing H2O2 as an additive revealed that the Avrami model fits the metal leaching process. The results of this study suggested that diffusion and surface chemical reactions controlled the leaching mechanisms of these metals, with activation energies of 7.829, 5.646, and 5.077 kJ mol-1 for Li, Ni, and Co, respectively.

15 October 2024 in Results in Engineering
Verified
Journal Article
Open access
TCThanapon Chandakhiaw
Thanapon Chandakhiaw
NTNeung Teaumroong
Neung Teaumroong
PPPongdet Piromyou
Pongdet Piromyou
PSPongpan Songwattana
Pongpan Songwattana
WTWaraporn Tanthanuch
Waraporn Tanthanuch
Sakhob KhumkoaSakhob Khumkoa
Sakhob Khumkoa

28 January 2025 in Results in Engineering
Verified
Journal Article
Open access
NWNatcha Wongnaree
Natcha Wongnaree
TYTanongsak Yingnakorn
Tanongsak Yingnakorn
NMNatthicha Ma-Ud
Natthicha Ma-Ud
LSLoeslakkhana Sriklang
Loeslakkhana Sriklang
Sakhob KhumkoaSakhob Khumkoa
Sakhob Khumkoa

6 February 2026 in Scientific Reports
Verified
Journal Article
Open access
PDF file
SSSirunya Somla
Sirunya Somla
TYTanongsak Yingnakorn
Tanongsak Yingnakorn
TCThanapon Chandakhiaw
Thanapon Chandakhiaw
CLChaiyasit Longbutsri
Chaiyasit Longbutsri
LSLoeslakkhana Sriklang
Loeslakkhana Sriklang
Sakhob KhumkoaSakhob Khumkoa
Sakhob Khumkoa
This study presents a sustainable, value-added approach to synthesizing high-quality zinc oxide nanoparticles (ZnO NPs) by utilizing ZnO recovered from industrial electric arc furnace dust (EAFD) waste. The integrated two-stage process involved selective acid leaching for precursor purification, followed by hydrothermal synthesis for morphology control. Optimized leaching using 2 M H2SO4 achieved a high zinc recovery rate of over 90% while effectively minimizing lead contamination. Subsequently, key hydrothermal parameters—including pH (7–12), temperature 100–200 °C, reaction time (1–24 h), and NaOH concentration (0.5–6 M)—were systematically varied. This optimization successfully produced ZnO NPs with diverse, tunable morphologies, including nanorods, nanoplates, and nanogranules. XRD confirmed the high crystallinity and phase purity (wurtzite structure), and UV-Visible spectroscopy showed a strong UV absorption with a calculated band gap of 3.34 eV. The antibacterial activity revealed that the nanoplate morphology produced a larger inhibition zone than the nanorod against both Staphylococcus aureus and Escherichia coli. These findings demonstrate the viability of upcycling industrial waste into high-performance, morphology-controlled nanomaterials, paving the way for sustainable and environmentally friendly production.

19 September 2022 in Recycling
Verified
Journal Article
Open access
PDF file
Tapany PatcharawitTapany Patcharawit
Tapany Patcharawit
WKWoranittha Kritsarikan
Woranittha Kritsarikan
TYTanongsak Yingnakorn
Tanongsak Yingnakorn
Sakhob KhumkoaSakhob Khumkoa
Sakhob Khumkoa
This research investigated recycling of manufacturing NdFeB magnet wastes in as-sintered and powder forms which contained high carbon via pyro-hydro metallurgy process. Effects of oxidative roasting on selective leaching of the magnet wastes were the main focus in comparison to recycling via whole leaching without oxidative roasting. The process started from oxidative roasting at 600 °C, sulfuric leaching, drying, roasting at 750 °C for powder and 800 °C for sintered wastes, water leaching, oxalic acid precipitation and calcination at 1000 °C to obtain neodymium oxides. Oxidative roasting was found to reduce carbon and resulted in neodymium and iron oxide formation with a minimum amount of neodymium iron oxide. This provided effective selective leaching of neodymium. For whole leaching, a significant loss of neodymium into leached residue was observed. Oxidative roasting-selective leaching provided significant recovery in the amount of 75.46% while whole leaching resulted in only 31.62 wt.% in the case of sintered waste. The final composition via oxidative roasting-selective leaching consisted of 68.11 wt.% neodymium, 19.83 wt.% praseodymium and 0.31 wt.% iron, while whole leaching resulted in a higher amount of iron at 1.20 wt.%. Similar results were obtained for powder magnet waste.

20 February 2025 in Metals
Verified
Journal Article
Open access
PDF file
JTJirapracha Thampiriyanon
Jirapracha Thampiriyanon
Sakhob KhumkoaSakhob Khumkoa
Sakhob Khumkoa
High-entropy alloys (HEAs) are a novel class of materials that exhibit exceptional mechanical, thermal and corrosion-resistant properties, making them highly promising for various industrial applications. The complex and variable compositions of HEAs present significant challenges in accurately predicting their phase structures, which is crucial for tailoring their properties for specific applications. This study proposes a machine learning (ML)–based approach to predict HEA phase structures using experimentally validated datasets containing chemical composition–derived features. A Boolean vector technique was employed to encode multiphase classifications, allowing the model to accurately capture complex phase relationships. Four ML algorithms consisting of support vector machine (SVM), k-nearest neighbors (KNN), random forest (RF) and neural network (NN) were utilized to develop predictive models. The models were evaluated using rigorous cross-validation (CV) and tested on unseen data samples. The results demonstrate that NN and KNN outperform other models, achieving an impressive test accuracy of 84.85%. Feature importance analysis reveals that valence election concentration and melting temperature are the most influential factors governing phase formation. This study highlights the effectiveness of ML in accelerating HEA design by significantly reducing reliance on experimental trial-and-error approaches. The predictive models can be applied in alloy design to rapidly screen compositions with desired phase structures, guiding experimental synthesis and optimizing material properties for advanced application. The findings underscore the potential of ML in computational materials science and open new avenues for integration artificial intelligence–driven approaches with conventional metallurgical techniques to enhance HEA development.