The article presents the original results of the investigation of sulfide-bearing mine tailings dumps (Ursk, Western Siberia, Russia), the adjacent territory, and acid mine drainage flows. The novelty of this study is related to integration of geophysical and geochemical data. The geoelectrical structure of the dump and the drainage valley was determined using the electrical resistivity tomography (ERT) method. Magnetic anomalies above the surface of the site were identified using ground magnetic surveys. The orthophotomap and a digital elevation model were obtained on the basis of aerial photography from an unmanned aircraft. The model of thermal imaging allows us to identify a number of temperature anomalies in the upper part of the dump slope and filtration zone in the drainage valley, caused by exothermic reactions. The digital relief model was constructed comprising three zones: (1) oxidation, (2) leaching, and (3) mixing and dilution. The oxidation zone is marked by low electrical resistivity (1–10 Ω·m), low pH values of the drainage waters (pH 3.61), low values of the modulus of the magnetic induction vector, and heating by +5 °C compared to the solid dump material that is not actively exposed to water. The oxidative conditions and low pH values favor the dilution of the Fe²⁺ compounds in the drainage solutions, which also contain Cu (3000 μg/L), Pb (1200 μg/L), As (1300 μg/L), and Hg (34 μg/L). The zone of the primary geochemical barrier is formed within the first 400 m, where the major proportion of dissolved elements if deposited. The second iron–aluminum sorption geochemical barrier is formed at a distance of 1000 m at the mixing zone with the Ur River. The stable geochemistry of surface waters, formed due to the inflow of drainage waters into the Ur River and further into the reservoir, persists at a distance of up to 7.7 km from the dump.

This study describes the distribution of arsenic mobile species in the tailings of Cu–Co–Ni–arsenide using the sequential extraction and determining the contents of arsenate (As^V) and arsenite (As^III). The object of this study is the tailings ponds of the Tuvakobalt plant, which contains waste from the hydrometallurgical arsenide ore processing of the Khovu-Aksy deposit (Republic of Tuva, Russia). A procedure of sequential extraction for arsenic was applied, and it includes the extraction of the following forms: water-soluble, potentially water-soluble and exchangeable, easily sorbed on the surface of carbonates, associated with Fe/Mn oxides/hydroxides, associated with easily oxidized minerals, and accounted for by non-oxidized arsenic minerals. This procedure, which takes into account the peculiarities of the physical and chemical composition of the waste, was supplemented by the analytical determination of the arsenite and arsenate content by using the methods of inductively coupled plasma atomic emission spectrometry (ICP-AES) combined with the hydride generation technique (HG-ICP-AES). The content of the most mobile forms of arsenic, which are water-soluble, potentially water-soluble, and exchangeable species, is equal to 56% of the total arsenic content, 23% and 33% of which are arsenite and arsenate, respectively. Unlike arsenic, the mobile forms of metals have been determined in small quantities. The largest proportion of water-soluble and exchangeable forms is formed by Mg, Ca, and Sr at 11, 9.4, and 20%, respectively (residual and redeposited carbonates). The proportion of water-soluble forms of other metals (Cu, Zn, Co, and Ni) is < 1% or 0. The main part of the metals is adsorbed on the surface of Fe and Mn hydroxides, enclosed in easily and hardly oxidized minerals. In addition to geochemical studies, the presence of leaks from the tailing ponds into ground waters was determined by using electrical resistivity tomography. The data obtained indicate a high environmental hazard of tailings and the possibility of water-soluble and highly toxic arsenic compounds entering ground waters and aquifers.

Tailings represent a significant risk to the environment globally, but very little is known about the composition of the near-surface air. We conducted laboratory experiments to determine the sizes of the particles and the chemical composition of the flow above the mine waste. A condensate of vapor–gas flow was collected in parallel with particle control by an aerosol diffusion spectrometer (ADS). We reveal that there were no aerosol particles bigger than 3 nm in the flow. The collected condensate contained chemical elements, ions of sulfates, chlorides, phosphates, and formates and a wide range of sulfur-, selenium-, and carbon-containing gases. The main findings of the study are the presence of the metals Zn, Cu, Fe, Al, Cd, Ni, and Ba and the metalloids As, Sb, Se, Ag, Co, Ti, and V in the true-gas phase or in the form of particles smaller than 3 nm in the air above the mine tailings. The surprising fact is that the migration of metals and metalloids in a true-gas form or in ultrafine particles (<3 nm) is possible, which opens up a new research direction on the volatile forms of chemical elements in various climatic conditions and their bioavailability and toxicity.