This paper presents a novel spline couplings test rig. Its peculiarity is to allow angular misalignments between hub and shaft in order to investigate the behavior of spline couplings in real working conditions, in particular, to investigate fretting wear phenomena. A preliminary experimental activity has been carried out showing a correct behavior of the test rig from all points of view. A preliminary approximated estimation of the test articles fretting wear has been obtained by means of two experimental parameters: Ra roughness and the amount of angular rotation clearance. An estimation of the Ruiz parameter has also been obtained.
9 August 2023 in The International Journal of Advanced Manufacturing Technology
The non-destructive full-field non-contact thermographic technique is applied for non-destructive flaw detection of the welded joints, in real-time and offline configuration. In this paper, a thermographic procedure for real-time flaw detection in manual arc welding process is presented. Surface temperature acquisitions by means of an IR camera were performed during arc welding process of 8 specimen both for calibration and validation of the numerical model. The investigated variables are the technique (manual stick arc (SMAW) and gas arc (GMAW) welding) and the joint shape (butt and T joint) for steel joints, in sound conditions and with artificial flaws. Numerical simulation of welding thermal transients was run to obtain the expected surface temperature fields and thermal behavior for different welding parameter configurations. Hardness measurement and micro-graphic analysis were performed to validate numerical simulation results. The real-time thermographic study of the weld pool gives direct indications of anomalies; local studies of the thermal transient and thermal profiles can detect some kind of flaws; microstructural analysis of Heat-Affected Zone (HAZ) and surrounding areas higlights the presence of austenite and martensite distribution which justifies the thermal transients and thermal profiles for different welding configurations. Comparing real-time IR acquisition of the welding process with simulated thermal contours of sound processes provides information of presence of some kind of flaws. Since most of the flaws are generated in the weld pool, it is possible to recognize anomalies directly from the thermal acquisitions or with post-processing the acquired data.
8 August 2023 in The International Journal of Advanced Manufacturing Technology
In the present paper, the results of a research focused on microstructure investigation of steel welded joints by means of non destructive thermographic technique are presented. In particular, two rough joints obtained by means of irregular manual welding are analyzed. Active lock in thermography phase analysis is applied, basing on the evidence that thermal diffusivity is related to the thermal diffusion length, using the phase contrast trend as a function of the distance from the laser spot. Diffusivity is expected to be dependent on the local microstructure and vary through different directions. By the variation in diffusivity, it is possible to investigate the level of anisotropy.The results are compared with micrographic analysis. The proposed method provides an active lock-in infrared thermography analysis by means of a thermal camera and an exciting laser head to evaluate thermal diffusivity.
Spline couplings are often used in aerospace industry for the purpose of power and torque transfer. A spline coupling typically consists of a hub and shaft with internal and external teeth respectively. As the teeth are engaged and the spline coupling is put into operation, repeated relative surface movement of teeth begins and results in fretting wear. Principal component analysis (PCA) is a statistical technique to identify the important parameters and their relationships with each other. This work deals with the characterization of fretting wear by the help of principal component analysis. PCA has been applied to the experimental data obtained from fretting wear tests in the lab and important variables with respect to fretting wear identified. This serves as a new tool to interpret the experimental results and hypothesis generation in the field of fretting wear
The aim of this paper is to define and set up an experimental procedure, based on active thermography, for the characterization of coatings for industrial applications. This procedure is intended to be a fast and reliable method, alternative to the consolidated one described in International Standards. In more detail, a classical active thermographic set up, and not a dedicated apparatus, was used for that aim, and data processing techniques referred to the analytical approach described in Standards. The active thermography procedure provided the measurement of the surface temperature of specimens undergoing a thermal excitation, applied by means of a laser pulse (Pulsed Technique). Temperature data processing, according to and adapting the Standard procedures, allowed to obtain thermal conductivity and diffusivity information. In particular, two coating processes (Atmospheric and Suspension Plasma Spray) applied to the same base material, Inconel 601, and the same coating material were investigated. These results were compared in terms of thermal properties variation with respect to base and coated materials, and in terms of different coating processes (APS and SPS). Obtained results were also compared to those available in literature.