With World oil demand increasing in the face of limited supplies, increasing attention is turning towards non-conventional oil sources as a means to relieve the pressure exerted on conventional stocks. However, non-conventional oils are hard to extract, process and transport. Several technologies are already at work with differing levels of success, recovery ranging from as low as 5% through to more than 70%. This paper reviews the range of Enhanced Oil Recovery techniques, broadly classified into either thermal or non-thermal methods, and their applicability to the extraction of heavy oils and bitumens. Advantages and disadvantages are presented in terms of their recovery factors, requirements, limitations and economics. The potential benefits of additional downhole catalytic upgrading of heavy oils are also explored.

Hydrolysis of the DMF or DEF solvent influences the nature of the product observed in the reaction between zinc(II) nitrate and 1,4-benzenedicarboxylic acid, with dialkylammonium cations able to template the formation of anionic networks.

This document deals with the characterization of porous materials having pore widths in the macropore range of 50 nm to 500 μm. In recent years, the development of advanced adsorbents and catalysts (e.g., monoliths having hierarchical pore networks) has brought about a renewed interest in macropore structures. Mercury intrusion–extrusion porosimetry is a well-established method, which is at present the most widely used for determining the macropore size distribution. However, because of the reservations raised by the use of mercury, it is now evident that the principles involved in the application of mercury porosimetry require reappraisal and that alternative methods are worth being listed and evaluated. The reliability of mercury porosimetry is discussed in the first part of the report along with the conditions required for its safe use. Other procedures for macropore size analysis, which are critically examined, include the intrusion of other non-wetting liquids and certain wetting liquids, capillary condensation, liquid permeation, imaging, and image analysis. The statistical reconstruction of porous materials and the use of macroporous reference materials (RMs) are also examined. Finally, the future of macropore analysis is discussed.