With the recent push for a transition towards a climate-resilient economy, the demand on marine resources is accelerating. For many economic exploits, a comprehensive understanding of environmental parameters underpinning seabed morphodynamics in tidally-dominated shelf seas, and the relationship between local and regional scale sediment transport regimes as an entire system, is imperative. In this paper, high-resolution, time-lapse bathymetry datasets, hydrodynamic numerical modelling outputs and various theoretical parameters are used to describe the morphological characteristics of sediment waves and their spatio-temporal evolution in a hydrodynamically and morphodynamically complex region of the Irish Sea. Analysis reveals sediment waves in a range of sizes (height = 0.1 to 25.7 m, and wavelength = 17 to 983 m), occurring in water depths of 8.2 to 83 mLAT, and migrating at a rate of 1.1 to 79 m/yr. Combined with numerical modelling outputs, a strong divergence of sediment transport pathways from the previously understood predominantly southward flow in the south Irish Sea is revealed, both at offshore sand banks and independent sediment wave assemblages. This evidence supports the presence of a semi-closed circulatory hydrodynamic and sediment transport system at Arklow Bank (an open-shelf linear sand bank). Contrastingly, the Lucifer–Blackwater Bank complex and associated sediment waves are heavily influenced by the interaction between a dominant southward flow and a residual headland eddy, which also exerts a strong influence on the adjacent banner bank. Furthermore, a new sediment transfer system is defined for offshore independent sediment wave assemblages, whereby each sediment wave field is supported by circulatory residual current cells originating from offshore sand banks. These new data and results improve knowledge of seabed morphodynamics in tidally-dominated shelf seas, which has direct implications for offshore renewable developments and long-term marine spatial planning.

Offshore sand banks are an important resource for coastal protection, marine aggregates, and benthic habitats and are the site of many offshore wind farms. Consequently, a comprehensive understanding of the baseline processes controlling sand bank morphodynamics is imperative. This knowledge will aid the development of a long-term robust marine spatial plan and help address the environmental instability arising from anthropogenic activities. This study uses a validated, dynamically coupled, two-dimensional hydrodynamic and sediment transport model to investigate the hydrodynamic processes controlling the highly mobile upper layer of Arklow Bank, while maintaining overall long-term bank base stability. The results reveal a flood and ebb tidal current dominance on the west and east side of the bank, respectively, ultimately generating a large anticlockwise residual current eddy encompassing the entire bank. This residual current flow distributes sediment along the full length of the sand bank. The positioning of multiple off-bank anticlockwise residual current eddies on the edge of this cell is shown to influence east–west fluctuations of the upper slopes of the sand bank and act as a control on long-term stability. These off-bank eddies facilitate this type of movement when the outer flows of adjacent eddies, located on both sides of the bank, flow in a general uniform direction. Whereas they inhibit this east–west movement when the outer flows of adjacent eddies, on either side of the bank, flow in converging directions towards the bank itself. These residual eddies also facilitate sediment transport in and out of the local sediment transport system. Within Arklow Bank’s morphological cell, eight morphodynamically and hydrodynamically unique bank sections or ‘sub-cells’ are identified, whereby a complex morphodynamic–hydrodynamic feedback loop is present. The local east–west fluctuation of the upper slopes of the bank is driven by migratory on-bank stationary and transient clockwise residual eddies and the development of ‘narrow’ residual current cross-flow zones. Together, these processes drive upper slope mobility but maintain long-term bank base stability. This novel understanding of sand bank morphodynamics is applicable to bedforms in tidally dominated continental shelf seas outside the Irish Sea.

Offshore anthropogenic activities such as the installation of Offshore Renewable Energy (ORE) developments and sediment extraction for marine aggregates have been shown to disrupt current flow, wave propagation, and sediment transport pathways, leading to potential environmental instability. Due to the complexity of the interconnected sediment transport pathways in the south-western Irish Sea combined with an increase in planned anthropogenic activities, the assessment of this risk is imperative for the development of a robust marine spatial plan. Subsequently, this study uses two-dimensional morphological modelling to build upon previous studies to assess the dependency of Arklow Bank’s local sediment transport regime on external sediment sources. Additionally, scenario modelling is used to identify vulnerable areas of this offshore linear sand bank to wind and wave-forcing and to examine the nature of this impact. A sediment budget is estimated for Arklow Bank, whereby seven source and nine sink pathways are identified. New evidence to support the exchange of sediment between offshore sand banks and offshore independent sand wave fields is also provided. The areas of the bank most vulnerable to changes in external sediment sources and the addition of wind- and wave-induced flow are analogous. These high vulnerability zones (HVZs) align with regions of residual cross-flow under pure current conditions. The restriction of sediment sources off the southern extent of Arklow Bank impacts erosion and accretion patterns in the mid- and northern sections of the bank after just one lunar month of simulation. Where tidal current is the primary driver of sand bank morphodynamics, wind- and wave-induced flow is shown to temporarily alter sediment distribution patterns. Wind and wave-induced flow can both accelerate and decelerate the east-west fluctuation of the upper slopes of the bank, yet the nature of this impact is inconsistent due to the misalignment of the directionality of these two forces. The methods and new knowledge derived from this study are directly applicable to tidally-dominated environments outside the Irish Sea.

Reliable coastal and offshore sediment transport data is a requirement for many engineering and environmental projects including port and harbour design, dredging and beach nourishment, sea shoreline protection, inland navigation, marine pollution monitoring, benthic habitat mapping, and offshore renewable energy (ORE). Novel sediment transport numerical modelling approaches allow engineers and scientists to investigate the physical interactions involved in these projects both in the near and far field. However, a lack of confidence in simulated sediment transport results is evident in many coastal and offshore studies, mainly due to limited access to validation datasets. This study addresses the need for cost-effective sediment validation datasets by investigating the applicability of four new suspended load validation techniques to a 2D model of the south-western Irish Sea. This involves integrating an estimated spatial time series of suspended solids concentration (${SSC}_{solids}$) derived from acoustic Doppler current profiler (ADCP) acoustic backscatter with several in situ water sample-based ${SSC}_{solids}$ datasets. Ultimately, a robust spatial time series of ADCP-based ${SSC}_{solids}$ was successfully calculated in this offshore, tidally dominated setting, where the correlation coefficient between estimated ${SSC}_{solids}$ and directly measured ${SSC}_{solids}$ is 0.87. Three out of the four assessed validation techniques are deemed advantageous in developing an accurate 2D suspended sediment transport model given the assumptions of the depth-integrated approach. These recommended techniques include (i) the validation of 2D modelled suspended sediment concentration (${SSC}_{sediment}$) using water sample-based ${SSC}_{solids}$, (ii) the validation of the flood–ebb characteristics of 2D modelled suspended load transport and ${SSC}_{sediment}$ using ADCP-based datasets, and (iii) the validation of the 2D modelled peak ${SSC}_{sediment}$ over a spring–neap cycle using the ADCP-based ${SSC}_{solids}$. Overall, the multi-disciplinary method of collecting in situ metocean and sediment dynamic data via acoustic instruments (ADCPs) is a cost-effective in situ data collection method for future ORE developments and other engineering and scientific projects.