Latifah Jasmani

Dr. Latifah Jasmani

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 January 2022 in Polymers
Verified
Journal Article
Open access
PDF file
NRNur Amirah Mamat Razali
Nur Amirah Mamat Razali
RSrisby sohaimi
risby sohaimi
RORaja Nor Izawati Raja Othman
Raja Nor Izawati Raja Othman
NANorli Abdullah
Norli Abdullah
SDS. Z. N. Demon
S. Z. N. Demon
NHNorhana Abdul Halim
Norhana Abdul Halim
Inspired by nature, cellulose extracted from plant wastes has been explored, due to its great potential as an alternative for synthetic fiber and filler that contributes to structural performance. The drive of this study was to extract, treat, and evaluate the characteristics of rice straw (RS) (Oryza sativa L.) cellulose as a biodegradable reinforcement to be utilized in polymer base materials. Two routes of extraction and treatment were performed via the pulping (Route 1) and chemo-mechanical methods (Route 2), in order to discover comparative characteristics of the synthesized cellulose fiber. Comprehensive characterization of RS cellulose was carried out to determine crystallinity, surface morphology, and chemical bonding properties, using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and Fourier transform infra-red (FTIR), respectively. The XRD test results showed that the crystallinity index (CI) of cellulose powder (CP) decreased after the surface modification treatment, Route 2, from 64.50 to 50.10% CI for modified cellulose powder (MCP), due to the surface alteration of cellulose structure. From Route 1, the crystallinity of the fibers decreased up to 33.5% (dissolve cellulose, DC) after the pulp went through the surface modification and dissolution processes, resulting from the transformation of cellulose phase into para-crystalline structure. FESEM micrographs displayed a significant reduction of raw RS diameter from 7.78 µm to 3.34 µm (treated by Route 1) and 1.06 µm (treated by Route 2). The extracted and treated cellulose via both routes, which was considerably dominated by cellulose II because of the high percentage of alkaline used, include the dissolve cellulose (DC). The dissolution process, using NMMO solvent, was performed on the pulp fiber produced by Route 1. The fiber change from cellulose I to cellulose II after undergoes the process. Thus, the dissolution process maintains cellulose II but turned the pulp to the cellulose solution. The acquired characteristics of cellulose from RS waste, extracted by the employed methods, have a considerably greater potential for further application in numerous industries. It was concluded that the great achievement of extracted RS is obtained the nanosized fibers after surface modification treatment, which is very useful for filler in structural composite applications.

4 November 2020 in Discover Nano
Verified
Journal Article
Open access
PDF file
LJLatifah Jasmani
Latifah Jasmani
RRRafeadah Rusli
Rafeadah Rusli
TKtumirah khadiran
tumirah khadiran
RJRafidah Jalil
Rafidah Jalil
SASharmiza Adnan
Sharmiza Adnan
Wood-based industry is one of the main drivers of economic growth in Malaysia. Forest being the source of various lignocellulosic materials has many untapped potentials that could be exploited to produce sustainable and biodegradable nanosized material that possesses very interesting features for use in wood-based industry itself or across many different application fields. Wood-based products sector could also utilise various readily available nanomaterials to enhance the performance of existing products or to create new value added products from the forest. This review highlights recent developments in nanotechnology application in the wood-based products industry.

18 June 2019 in Sensors
Verified
Journal Article
Open access
PDF file
WKWan Elina Faradilla Wan Khalid
Wan Elina Faradilla Wan Khalid
MAMohamad Nasir Matr Arip
Mohamad Nasir Matr Arip
LJLatifah Jasmani
Latifah Jasmani
LHLee Yook Heng
Lee Yook Heng
A new cellulose nanocrystal–reduced graphene oxide (CNC–rGO) nanocomposite was successfully used for mediatorless electrochemical sensing of methyl paraben (MP). Fourier-transform infrared spectroscopy (FTIR) and field-emission scanning electron microscopy (FESEM) studies confirmed the formation of the CNC–rGO nanocomposite. Cyclic voltammetry (CV) studies of the nanocomposite showed quasi-reversible redox behavior. Differential pulse voltammetry (DPV) was employed for the sensor optimization. Under optimized conditions, the sensor demonstrated a linear calibration curve in the range of 2 × 10−4–9 × 10−4 M with a limit of detection (LOD) of 1 × 10−4 M. The MP sensor showed good reproducibility with a relative standard deviation (RSD) of about 8.20%. The sensor also exhibited good stability and repeatability toward MP determinations. Analysis of MP in cream samples showed recovery percentages between 83% and 106%. Advantages of this sensor are the possibility for the determination of higher concentrations of MP when compared with most other reported sensors for MP. The CNC–rGO nanocomposite-based sensor also depicted good reproducibility and reusability compared to the rGO-based sensor. Furthermore, the CNC–rGO nanocomposite sensor showed good selectivity toward MP with little interference from easily oxidizable species such as ascorbic acid.

29 August 2016 in Cellulose
Verified
Journal Article
Closed access
PDF file
LJLatifah Jasmani
Latifah Jasmani
SESamuel Eyley
Samuel Eyley
CSChristina Schütz
Christina Schütz
HGHans Van Gorp
Hans Van Gorp
SFSteven De Feyter
Steven De Feyter
WTWim Thielemans
Wim Thielemans

28 October 2022 in Polymers
Verified
Journal Article
Open access
PDF file
LJLatifah Jasmani
Latifah Jasmani
NJNurul Ain Nadirah Jamaluddin
Nurul Ain Nadirah Jamaluddin
RRRafeadah Rusli
Rafeadah Rusli
SASharmiza Adnan
Sharmiza Adnan
SZSarani Zakaria
Sarani Zakaria
Nanocellulose is a versatile cellulosic nanomaterial that can be used in many application areas. Applying different preparation strategies leads to different types of nanocellulose. In this study, nanocrystalline cellulose (NCC) and nanofibrillated cellulose (NFC) were prepared from lesser known wood species, viz., Macaranga gigantea, using sulfuric acid hydrolysis and enzymatic pretreatment with ultrafine grinding approaches, respectively. The respective nanocellulose was characterized by means of Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) analysis, thermogravimetric analysis (TGA), atomic force microscopy (AFM). It was then converted into a thin film to assess its performance which includes tensile test, transparency, air permeance, water vapor transmission rate (WVTR), and water vapor permeability (WVP) properties. NCC and NFC produced from the raw material of Macaranga had average widths of 6.38 ± 3.92 nm and 13.17 ± 12.71 nm, respectively. Peaks in FTIR spectra showed the conversion of Macaranga wood to nanocellulose by the presence of cellulose fingerprint as well as absence of lignin and hemicellulose after alkaline treatment. The successful conversion was also supported by XRD analysis which displayed the increased crystallinity value from 54% to 70%. TGA decomposition pattern at 200–490 °C revealed the thermal stability of the samples. The thin film produced from nanocelluloses had WVTR values of 4.58 and 12.14 g/(day·m2) for NFC and NCC, respectively, comparable to those of films from polyester and oriented polypropylene. Nanocellulose-based thin film has the potential to be used as sustainable and biodegradable packaging.

13 June 2018 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
LJLatifah Jasmani
Latifah Jasmani
SAS Adnan
S Adnan
ZAZ M A Ainun
Z M A Ainun
Nanostructured cellulose has received tremendous attention due to its inherent unique properties. Being the most abundant organic polymer on earth, cellulose is the most suitable candidate for alternative replacement of petroleum-based products. Nanofibrillated cellulose (NFC) can be converted into thin films, aerogels and hydrogels. In particular, nanofibrillated cellulose suspension can form a neat and transparent thin film that has good film properties. Subsequently, this thin film can have numerous potential application areas such as in packaging, electronic etc. The objective of the study was to prepare nanofibrillated cellulose from local forest species namely Mahang gajah. After successful production of NFC, thin film was prepared from NFC and compared with commercial NFC. NFC was successfully produced from Mahang gajah possessing 19.7±17 nm width. Thin film produced from Mahang NFC showed comparable properties with commercial NFC such as thermal stability, porosity and wettability.