Riya Catherine George

Dr. Riya Catherine George

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 March 2022 in IEEE Sensors Journal
Verified
Journal Article
Closed access
SSSarvesh Kumar Sonkar
Sarvesh Kumar Sonkar
PKPrashant Kumar
Prashant Kumar
RGRiya Catherine George
Riya Catherine George
DPDeepu Philip
Deepu Philip
AGAjoy Kanti Ghosh
Ajoy Kanti Ghosh
Presently, unmanned aerial vehicles (UAVs) have a broad spectrum of applications, in which regular monitoring of critical infrastructure assets is an important risk mitigation usage. This paper presents a novel approach for modeling leakage from natural gas pipelines using machine learning algorithms operating on the gas leakage detection (Methane) data collected using an UAV having a gas sensor and a light detecting and ranging (LIDAR) payload. The detection system has a lightweight design along with a small form factor to ensure compatibility with most autonomous mobile platforms like UAVs or wheeled robots. Two experiments were conducted to collect the gas leakage detection data at various loitering heights in real atmospheric conditions before applying the estimation algorithms. The first experiment measured natural gas leakage data in varying loitering radiuses and altitudes for leakage pressures around one pound per square inch (PSI), while the second experiment did the same for leakage pressures around two PSI. Real atmospheric conditions were incorporated along with additional aspects of propeller down-wash and environmental air movements that can influence leakage detection. Two estimation algorithms, viz., reduced support vector machine (RSVM) and artificial neural network (ANN) were applied to the leakage data collected from the UAV experiments. It was found that the ANN approach resulted in more faster and accurate detection than RSVM that heavily depended on the kernel function for its performance. The efficacy of leakage detection of natural gas using a UAV payload was demonstrated, which is a faster and cost-effective alternative to the manual inspection process.

19 September 2022 in IEEE Sensors Journal
Verified
Journal Article
Closed access
SSSarvesh Sonkar
Sarvesh Sonkar
PKPrashant Kumar
Prashant Kumar
RGRiya Catherine George
Riya Catherine George
TYT. P. Yuvaraj
T. P. Yuvaraj
DPDeepu Philip
Deepu Philip
AGA. K. Ghosh
A. K. Ghosh
This research aimed to identify objects from a real-time video (30Hz) stream transmitted from a Low Altitude Long Endurance (LALE) fixed-wing hybrid Vertical Take-off and Landing (VTOL) Unmanned Aerial Vehicle (UAV) designed for asset monitoring. Illumination, rotation, and scale variations complicate the video frames created by UAVs optical payload, requiring pre-processing. Detection, identification, and classification of different objects (or targets) from a real-time video feed require fast and reliable detection algorithms, models, and computation. The weight restrictions and the onboard power supply only allowed for a Raspberry Pi onboard the UAV, thereby seriously limiting computational power. Image frames were created from the video data after enhancing its quality using image processing algorithms. Then, anchor-based object detection algorithms were applied on the processed and enhanced image frames. The Raspberry Pi at airspeeds of 16-18m/s requires fast object detection algorithms having minimal computational overhead. A supervised learning technique using a supporting library further augmented the real-time detection at Ground Control Station (GCS). Four scenarios trained the candidate algorithms, viz., (i) helipad, (ii) green area, (iii) burnt area, and (iv) under construction area. The Single Shot Multi-box Detector (SSD) aided the supervised learning process during trials utilizing the labeled image datasets. The comparison of detection and identification performance of the SSD with ResNet-50 and ResNet-101 backbone with other methods like faster-RCNN with four backbone architecture, viz., (i) ResNet-101, (ii) ResNet-50, (iii) deformable ResNet, and (iv) FPN in four detection scenarios indicated better precision and reduced detection delays.

9 May 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
TUTomoya Uenaga
Tomoya Uenaga
POPedram Omidian
Pedram Omidian
RGRiya Catherine George
Riya Catherine George
MMMohsen Mirzajani
Mohsen Mirzajani
NKNaser Khaji
Naser Khaji
Curved bridges are commonly used for logistics and emergencies in urban areas such as highway interchange bridges. These types of bridges have complicated dynamic behaviors and also are vulnerable to earthquakes, so their functionality is a critical parameter for decision makers. For this purpose, this study aims to evaluate the bridge seismic resilience under the effects of changes in deck radius (50, 100, 150 m, and infinity), pier height irregularity (Regular and Irregular), and incident seismic wave angle (0°, 45°, and 90°) under short- and long-period records. In the first step, fragility curves are calculated based on the incremental dynamic analysis and probabilistic seismic demand models. Finally, seismic resilience curves/surfaces are constructed and their interpolated values of the log-normal distribution function presented for assessing system resilience. It is found that when long-period records are applied in one given direction, the angle of incidence has the most significant effect on seismic resilience, and bridges are most vulnerable when the angle of incidence tends to 0°. The effect of deck radius on seismic resilience became more remarkable as the angle of incidence increased. Additionally, results indicate that the bridge vulnerability in long-period records is more significant than that under short-period records.

28 March 2024 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
Verified
Journal Article
Open access
PDF file
SSSarvesh Sonkar
Sarvesh Sonkar
PKPrashant Kumar
Prashant Kumar
RGRiya Catherine George
Riya Catherine George
TYT. P. Yuvaraj
T. P. Yuvaraj
DPDeepu Philip
Deepu Philip
AGA. K. Ghosh
A. K. Ghosh
Fixed-wing hybrid vertical take-off and landing (VTOL) unmanned aerial vehicles (UAV) are popular due to their interoperability in the military and civilian domains, primarily where significant terrain difficulties exist for humans. Additionally, they can operate without requiring any runway infrastructure and have extended air endurance and efficiency. Since the hybrid UAV operates in distinct flight modes, viz., (a) VTOL and (b) fixed-wing cruise, carrying different payloads, the airframe structure requires careful design and manufacturing to realize sufficient strength. This experimental study aimed to identify the best combinations of various composite materials for manufacturing a lightweight, low-altitude long endurance (LALE) hybrid VTOL UAV. Primary materials include carbon fiber, Kevlar, fiber-reinforced plastic (FRP), resins, etc. Different rectangular test specimens of 120 × 5 mm size were made from ten different grades of carbon fiber, FRP, and resins using vacuum bagging. After properly curing these test specimens, we quantified their dynamic mechanical characteristics using various bending load experiments on a universal testing machine (UTM). An analysis of the experimental data facilitated the identification of the best composite combinations that provide maximum strength while reducing overall weight. Thus, we could understand the dynamic interplay between peak stress and test specimen weight. We also manufactured a UAV prototype using the identified combination and instrumented and flight-tested it to substantiate the experimental findings.

1 January 2023 in Journal of Aerospace Technology and Management
Verified
Journal Article
Open access
PDF file
SSSarvesh Sonkar
Sarvesh Sonkar
PKPrashant Kumar
Prashant Kumar
YPYuvaraj Tanjore Puli
Yuvaraj Tanjore Puli
RGRiya Catherine George
Riya Catherine George
DPDeepu Philip
Deepu Philip
AGAjoy Kanti Ghosh
Ajoy Kanti Ghosh
Fixed-wing unmanned aerial vehicles (UAVs) offer the best aerodynamic efficiency required for long-distance or high-endurance applications, albeit their runway requirement for take-off and landing in comparison with quadcopters, helicopters, and flapping-wing UAVs that can perform vertical take-off and landing (VTOL). Integrating a multirotor system with a fixed-wing UAV imparts VTOL capabilities without significantly compromising fixed-wing aerodynamic efficiency, endurance, payload capacity or range. Documented system design approaches to address various challenges of such fusion processes are sparse. This research proposes a holistic approach for designing, prototyping, and testing an electric-powered fixed-wing hybrid VTOL UAV. The proposed system design approach augments the standard aircraft design process with additional steps to integrate VTOL capabilities. Separate fixed-wing and multirotor designs were derived from the frozen mission requirements, which were then fused. The process used simulation for modeling and evaluating alternatives for the hybrid UAV created using standard aircraft design equations. We prototyped and instrumented the final design to validate operational capabilities through test flights. Multiple flight trials identified the ideal combination of Lithium-Polymer (Li-Po) batteries for VTOL (8000mAh) and fixed-wing (14000mAh) modes to meet the endurance and range requirements. The redundant power supplies also increased the survivability chances of the hybrid UAV during failures.

1 September 2024 in Journal of Aerospace Engineering
Verified
Journal Article
Closed access
PKPrashant Kumar
Prashant Kumar
SSSarvesh Sonkar
Sarvesh Sonkar
RGRiya Catherine George
Riya Catherine George
DPDeepu Philip
Deepu Philip
AGA. K. Ghosh
A. K. Ghosh