As an important part and the core link of a terrestrial ecosystem, terrestrial vegetation is the main means for human to regulate climate and mitigate the increase in atmospheric CO₂ concentration. The Yangtze River Delta (YRD) region is an urban agglomeration with the strongest comprehensive strength among developing countries (China). In the context of global climate change, a rapid, comprehensive, and detailed understanding of the spatio-temporal characteristics and variation tendency of the net ecosystem productivity (NEP) of vegetation and its response to climate during the rapid development of the YRD region is important for protecting ecological land, strengthening land management, and optimizing urban planning. The monthly mean temperature and rainfall data from 63 meteorological stations, the MODIS net primary productivity product, and a land cover product in the YRD region were used to estimate the NEP from 2000 to 2019 based on the soil respiration model, and the correlation between NEP and meteorological factors (such as temperature and rainfall) was analyzed. The results showed that: (1) From 2000 to 2019, the carbon sink area was much larger than the carbon source area in terrestrial vegetation in the Yangtze River Delta, the mean NEP of the vegetation ecosystem in the past 20 years was 253.2 g C·m⁻²·a⁻¹, and the spatial distribution presented a trend that was higher in the south and lower in the north, higher in the east and lower in the west, and that gradually increased from northwest to southeast; moreover, the NEP of mountain areas was generally higher than that of river courses and urban surroundings. The interannual fluctuation of NEP was small, but presented a slightly increasing trend, and the interannual variation of NEP was significantly correlated with the maximum NEP in this region. (2) The carbon sink capacity of different vegetation cover types was (from strong to weak): forestlands > grasslands > wetlands ≈ croplands. (3) The area with the NEP change rate (θ_slope) > 0 accounted for 69.0%; however, there was certain spatial difference, the proportions of the areas with θ_slope < 0 were (from large to small) 14.50% (Zhejiang Province, China), 9.10% (Anhui Province, China), 6.65% (Jiangsu Province, China), and 0.79% (Shanghai, China). In terms of the individual changes of these provinces and municipalities, Shanghai > Zhejiang Province > Jiangsu Province ≈ Anhui Province. (4) There was a correlation between NEP and the annual mean temperature and annual precipitation in some regions.

Vegetation dynamics in arid and semi-arid regions have an important impact on carbon cycle, water cycle, and energy exchange at local, regional, and global scales. Therefore, it is of great significance for scientists to grasp the changes of vegetation cover in arid and semi-arid regions timely and accurately. Based on this, the applicability of ESTARFM model in the complex terrain area of arid and semi-arid Xinjiang was explored using Landsat and MODIS data fusion, and the overall change characteristics of vegetation cover (FVC) and the distribution and change patterns of different terrains in the study area in the past 15 years were analyzed by combining the dimidiate pixel model, unary linear regression and digital elevation model. The results show that: (1) the NDVI data fused by ESTARFM Model has high consistency with the real NDVI data, and it can be used for subsequent FVC estimation. (2) From 2006 to 2020, the inter FVC was at a high level as a whole, and the average annual FVC showed a weak increasing trend in fluctuation; there are obvious differences in spatial distribution, which is characterized by high distribution in the north and low in the south. (3) The improved area of vegetation cover in the study area is greater than the degraded area, accounting for 52.3% and 47.7% respectively; (4) In the elevation range of 2000 to 3500 m, the FVC showed a slight degradation trend on 25° to 45° slopes and south and southeast slopes, and the rest showed a slight improvement trend. ESTARFM-based model enables monitoring of vegetation cover changes in complex terrain areas of the arid and semi-arid regions in Xinjiang over a long time series. The overall FVC level in the study area is high, and there both are serious degradation and improvement phenomena.

Forest biomass estimation is an important parameter for calculating forest carbon storage, which is of great significance for formulating carbon-neutral strategies and forest resource management measures. We aimed at solving the problems of low estimation accuracy of forest biomass with complex canopy structure and high canopy density, and large differences in the estimation results of the same estimation model under complex forest conditions. The Huangfu Mountain Forest Farm in Chuzhou City was used as the research area. As predictors, we used Gaofen-1(GF-1) and Gaofen(GF-6) satellite high-resolution imaging satellite data, combined with digital elevation model (DEM) and forest resource data. Multiple stepwise regression, BP neural network and random forest estimation models were used to construct a natural subtropical secondary forest biomass estimation model with complex canopy structure and high canopy closure. We extracted image information as modeling factors, established multiple stepwise regression models of different tree types with a single data source and a comprehensive data source and determined the optimal modeling factors. On this basis, the BP neural network and random forest biomass estimation model were established for Pinus massoniana, Pinus elliottii, Quercus acutissima and mixed forests, with the coefficient of determination n (R²) and root mean square error (RMSE) as the judgment indices. The results show that the random forest model had the best biomass estimation effect among different forest types. The R² of Quercus acutissima was the highest, reaching 0.926, but the RMSE was 11.658 t/hm². The R² values of Pinus massoniana and mixed forest were 0.912 and 0.904, respectively. The RMSE reached 10.521 t/hm² and 6.765 t/hm², respectively; the worst result was the estimation result of Pinus elliottii, with an R² of 0.879 and an RMSE of 14.721 t/hm². The estimation result of the BP neural network was second only to that of the random forest model in the four forest types. From high precision to low precision, the order was Quercus acutissima, Pinus massoniana, mixed forest and Pinus elliottii, with R²s of 0.897, 0.877, 0.825 and 0.753 and RMSEs of 17.899 t/hm², 10.168 t/hm², 18.641 t/hm² and 20.419 t/hm², respectively. In this experiment, the worst biomass estimation performance was seen for multiple stepwise regression, which ranked the species in the order of Quercus acutissima, Pinus massoniana, mixed forest and Pinus elliottii, with R²s of 0.658, 0.622, 0.528 and 0.379 and RMSEs of 29.807 t/hm², 16.291 t/hm², 28.011 t/hm² and 23.101 t/hm², respectively. In conclusion, GF-1 and GF-6 combined with data and a random forest algorithm can obtain the most accurate results in estimating the forest biomass of complex tree species. The random forest estimation model had a good performance in biomass estimation of primary secondary forest. High-resolution satellite data have great application potential in the field of forest parameter inversion.