Fossil-fuel (FF) burning releases carbon dioxide (CO2) together with many other chemical species, some of which, such as nitrogen dioxide (NO2) and carbon monoxide (CO), are routinely monitored from space. This study examines the feasibility of estimation of FF CO2 emissions from large industrial regions by using NO2 and CO column retrievals from satellite measurements in combination with simulations by a mesoscale chemistry transport model (CTM). To this end, an inverse modeling method is developed that allows estimating FF CO2 emissions from different sectors of the economy, as well as the total CO2 emissions, in a given region. The key steps of the method are (1) inferring "top-down" estimates of the regional budget of anthropogenic NOx and CO emissions from satellite measurements of proxy species (NO2 and CO in the case considered) without using formal a priori constraints on these budgets, (2) the application of emission factors (the NOx-to-CO2 and CO-to-CO2 emission ratios in each sector) that relate FF CO2 emissions to the proxy species emissions and are evaluated by using data of "bottom-up" emission inventories, and (3) cross-validation and optimal combination of the estimates of CO2 emission budgets derived from measurements of the different proxy species. Uncertainties in the top-down estimates of the NOx and CO emissions are evaluated and systematic differences between the measured and simulated data are taken into account by using original robust techniques validated with synthetic data. To examine the potential of the method, it was applied to the budget of emissions for a western European region including 12 countries by using NO2 and CO column amounts retrieved from, respectively, the OMI and IASI satellite measurements and simulated by the CHIMERE mesoscale CTM, along with the emission conversion factors based on the EDGAR v4.2 emission inventory. The analysis was focused on evaluation of the uncertainty levels for the top-down NOx and CO emission estimates and "hybrid" estimates (that is, those based on both atmospheric measurements of a given proxy species and respective bottom-up emission inventory data) of FF CO2 emissions, as well as on examining consistency between the FF NO2 emission estimates derived from measurements of the different proxy species. It is found that NO2 measurements can provide much stronger constraints to the total annual FF CO2 emissions in the study region than CO measurements, the accuracy of the NO2-measurement-based CO2 emission estimate being mostly limited by the uncertainty in the top-down NOx emission estimate. Nonetheless, CO measurements are also found to be useful as they provide additional constraints to CO2 emissions and enable evaluation of the hybrid FF CO2 emission estimates obtained from NO2 measurements. Our most reliable estimate for the total annual FF CO2 emissions in the study region in 2008 (2.71 ± 0.30 Pg CO2) is found to be about 11 and 5 % lower than the respective estimates based on the EDGAR v.4.2 (3.03 Pg CO2) and CDIAC (2.86 Pg CO2) emission inventories, with the difference between our estimate and the CDIAC inventory data not being statistically significant. In general, the results of this study indicate that the proposed method has the potential to become a useful tool for identification of possible biases and/or inconsistencies in the bottom-up emission inventory data regarding CO2, NOx, and CO emissions from fossil-fuel burning in different regions of the world.
29 January 2021 in Atmospheric Chemistry and Physics
We developed a high-resolution surface flux inversion system based on the global Eulerian–Lagrangian coupled tracer transport model composed of the National Institute for Environmental Studies (NIES) transport model (TM; collectively NIES-TM) and the FLEXible PARTicle dispersion model (FLEXPART). The inversion system is named NTFVAR (NIES-TM–FLEXPART-variational) as it applies a variational optimization to estimate surface fluxes. We tested the system by estimating optimized corrections to natural surface CO2 fluxes to achieve the best fit to atmospheric CO2 data collected by the global in situ network as a necessary step towards the capability of estimating anthropogenic CO2 emissions. We employed the Lagrangian particle dispersion model (LPDM) FLEXPART to calculate surface flux footprints of CO2 observations at a spatial resolution of . The LPDM is coupled with a global atmospheric tracer transport model (NIES-TM). Our inversion technique uses an adjoint of the coupled transport model in an iterative optimization procedure. The flux error covariance operator was implemented via implicit diffusion. Biweekly flux corrections to prior flux fields were estimated for the years 2010–2012 from in situ CO2 data included in the Observation Package (ObsPack) data set. High-resolution prior flux fields were prepared using the Open-Data Inventory for Anthropogenic Carbon dioxide (ODIAC) for fossil fuel combustion, the Global Fire Assimilation System (GFAS) for biomass burning, the Vegetation Integrative SImulator for Trace gases (VISIT) model for terrestrial biosphere exchange, and the Ocean Tracer Transport Model (OTTM) for oceanic exchange. The terrestrial biospheric flux field was constructed using a vegetation mosaic map and a separate simulation of CO2 fluxes at a daily time step by the VISIT model for each vegetation type. The prior flux uncertainty for the terrestrial biosphere was scaled proportionally to the monthly mean gross primary production (GPP) by the Moderate Resolution Imaging Spectroradiometer (MODIS) MOD17 product. The inverse system calculates flux corrections to the prior fluxes in the form of a relatively smooth field multiplied by high-resolution patterns of the prior flux uncertainties for land and ocean, following the coastlines and fine-scale vegetation productivity gradients. The resulting flux estimates improved the fit to the observations taken at continuous observation sites, reproducing both the seasonal and short-term concentration variabilities including high CO2 concentration events associated with anthropogenic emissions. The use of a high-resolution atmospheric transport in global CO2 flux inversions has the advantage of better resolving the transported mixed signals from the anthropogenic and biospheric sources in densely populated continental regions. Thus, it has the potential to achieve better separation between fluxes from terrestrial ecosystems and strong localized sources, such as anthropogenic emissions and forest fires. Further improvements in the modelling system are needed as our posterior fit was better than that of the National Oceanic and Atmospheric Administration (NOAA)'s CarbonTracker for only a fraction of the monitoring sites, i.e. mostly at coastal and island locations where background and local flux signals are mixed.
Despite a rapid development of Nature-Based Solutions (NBS) for carbon removal in recent years, the methods for evaluating NBS still have certain gaps. We propose an approach based on a combination of remote sensing data and meteorological variables to reconstruct the spatiotemporal variation of net ecosystem exchange from eddy-covariance stations. A Lagrangian particle dispersion model was used for upscaling satellite images and flux towers. We trained data-driven models based on kernel methods separately for each selected land-cover class. The results suggest that the proposed approach to quantifying carbon exchange on a medium-to-large scale by blending eddy covariance flux data with moderate resolution satellite and weather data provides a set of key advantages over previously deployed methods: (1) scalability, achieved via the validation design based on a separate set of eddy covariance stations; (2) high spatial and temporal resolution thanks to the use of Landsat imagery; and (3) robust and accurate predictions due to improved data quality control, advanced machine learning techniques, and rigorous validation. The machine learning models yielded high cross-validation results. Stratification that uses separate Fluxnet stations for each fold of validation ensures that the models are accurate across the area covered by the Fluxnet sites. Overall, we present here a globally scaled technology for the land sector based on high resolution remote sensing imagery, meteorological variables, and direct carbon flux measurements of eddy covariance flux stations.
3 January 2017 in Atmospheric Chemistry and Physics
The Total Carbon Column Observing Network (TCCON) is a network of ground-based Fourier transform spectrometers (FTSs) that record near-infrared (NIR) spectra of the sun. From these spectra, accurate and precise observations of CO2 column-averaged dry-air mole fractions (denoted XCO2) are retrieved. TCCON FTS observations have previously been used to validate satellite estimations of XCO2; however, our knowledge of the short-term spatial and temporal variations in XCO2 surrounding the TCCON sites is limited. In this work, we use the National Institute for Environmental Studies (NIES) Eulerian three-dimensional transport model and the FLEXPART (FLEXible PARTicle dispersion model) Lagrangian particle dispersion model (LPDM) to determine the footprints of short-term variations in XCO2 observed by operational, past, future and possible TCCON sites. We propose a footprint-based method for the collocation of satellite and TCCON XCO2 observations and estimate the performance of the method using the NIES model and five GOSAT (Greenhouse Gases Observing Satellite) XCO2 product data sets. Comparison of the proposed approach with a standard geographic method shows a higher number of collocation points and an average bias reduction up to 0.15 ppm for a subset of 16 stations for the period from January 2010 to January 2014. Case studies of the Darwin and Reunion Island sites reveal that when the footprint area is rather curved, non-uniform and significantly different from a geographical rectangular area, the differences between these approaches are more noticeable. This emphasises that the collocation is sensitive to local meteorological conditions and flux distributions.
We developed a high-resolution surface flux inversion system based on the global Lagrangian–Eulerian coupled tracer transport model composed of National Institute for Environmental Studies Transport Model (NIES-TM) and FLEXible PARTicle dispersion model (FLEXPART). The inversion system is named NTFVAR (NIES-TM-FLEXPART-variational) as it applies variational optimisation to estimate surface fluxes. We tested the system by estimating optimized corrections to natural surface CO2 fluxes to achieve best fit to atmospheric CO2 data collected by the global in-situ network, as a necessary step towards capability of estimating anthropogenic CO2 emissions. We employ the Lagrangian particle dispersion model (LPDM) FLEXPART to calculate the surface flux footprints of CO2 observations at a 0.1° × 0.1° spatial resolution. The LPDM is coupled to a global atmospheric tracer transport model (NIES-TM). Our inversion technique uses an adjoint of the coupled transport model in an iterative optimization procedure. The flux error covariance operator is being implemented via implicit diffusion. Biweekly flux corrections to prior flux fields were estimated for the years 2010–2012 from in-situ CO2 data included in the Observation Package (ObsPack) dataset. High-resolution prior flux fields were prepared using Open-Data Inventory for Anthropogenic Carbon dioxide (ODIAC) for fossil fuel combustion, Global Fire Assimilation System (GFAS) for biomass burning, the Vegetation Integrative SImulator for Trace gases (VISIT) model for terrestrial biosphere exchange and Ocean Tracer Transport Model (OTTM) for oceanic exchange. The terrestrial biospheric flux field was constructed using a vegetation mosaic map and separate simulation of CO2 fluxes at daily time step by the VISIT model for each vegetation type. The prior flux uncertainty for terrestrial biosphere was scaled proportionally to the monthly mean Gross Primary Production (GPP) by the Moderate Resolution Imaging Spectroradiometer (MODIS) MOD17 product. The inverse system calculates flux corrections to the prior fluxes in the form of a relatively smooth field multiplied by high-resolution patterns of the prior flux uncertainties for land and ocean, following the coastlines and vegetation productivity gradients. The resulting flux estimates improve fit to the observations at continuous observations sites, reproducing both the seasonal variation and short-term concentration variability, including high CO2 concentration events associated with anthropogenic emissions. The use of high-resolution atmospheric transport in global CO2 flux inversion has the advantage of better resolving the transport from the mix of the anthropogenic and biospheric sources in densely populated continental regions and shows potential for better separation between fluxes from terrestrial ecosystems and strong localised sources such as anthropogenic emissions and forest fires. Further improvements in the modelling system are needed as the posterior fit is better than that by the National Oceanic and Atmospheric Administration (NOAA) CarbonTracker only for a fraction of the monitoring sites, mostly at coastal and island locations experiencing mix of background and local flux signals.
17 October 2011 in Atmospheric Chemistry and Physics
In this work we propose an approach to solving a source estimation problem based on representation of carbon dioxide surface emissions as a linear combination of a finite number of pre-computed empirical orthogonal functions (EOFs). We used National Institute for Environmental Studies (NIES) transport model for computing response functions and Kalman filter for estimating carbon dioxide emissions. Our approach produces results similar to these of other models participating in the TransCom3 experiment. Using the EOFs we can estimate surface fluxes at higher spatial resolution, while keeping the dimensionality of the problem comparable with that in the regions approach. This also allows us to avoid potentially artificial sharp gradients in the fluxes in between pre-defined regions. EOF results generally match observations more closely given the same error structure as the traditional method. Additionally, the proposed approach does not require additional effort of defining independent self-contained emission regions.