Increases in the mining depth of coal pose a significant challenge to the conventional loop source time-domain electromagnetic (TEM) method that requires significant enlargement of the loop size and transmitting current to realize the deeper sounding results required. As an alternative, TEM devices based on a grounded wire source are generally used to solve detections deeper than several hundred meters. To map the water-enriched zones buried underneath approximately 1000 m at a coal mine in Shaanxi, China, loop TEM and short-offset transient electromagnetic (SOTEM) measurements were conducted. We carried out 1D forward modeling and inversion constrained by drilling informa-tion, and the results reveal that the resolution capability of loop TEM and SOTEM is almost the same in detecting a conductive layer in the absence of any noise. However, for a given noise level and decay time, the SOTEM method provides a deeper investigation than loop TEM without compromising sensitivity. The field examples validated the synthetic results. The loop TEM with dimensions of [ ] realized a maximum depth of 1000 m, whereas the reliable detection depth of 1500 m was achieved by using a 723 m long grounded wire source using the SOTEM method. Moreover, the labor required is significantly reduced, and the efficiency is dramatically raised using the SOTEM method. Our results predict that the SOTEM method should play a more important role in deep hydrogeophysical investigations.

Long-offset transient electromagnetic (LOTEM) has received great attention in mineral, hydrocarbon and hydrogeological investigations for the last several years. Conventionally, TEM soundings have been presented as apparent resistivity curves as function of time. With development of sophisticated computational algorithms, it became possible to extract more realistic geoelectric information by applying inversion programs to 1-D and 3-D problems. Here, we analyze LOTEM data by carrying out analysis in time, frequency and pseudo-seismic domain supported by borehole information. At first, H, K, A & Q type geoelectric models are processed using a proven inversion program (1-D Occam inversion). Second, time-to-frequency transformation is conducted from TEM ρa(f) curves for the same models based on all-time apparent resistivity curves. Third, 1-D Bostick's algorithm was applied to the transformed resistivity. Finally, EM diffusion field is transformed into propagating wave field and constructed pseudo-seismic section. The transformed seismic-like wave indicates that some reflection and refraction phenomena appear when the EM wave field interacts with a geoelectric interface at different depth intervals due to contrast in resistivity. In all three cases, synthetic tests showed that conductive anomaly in resistive host environment can be retrieved more clearly than resistive target. A case study illustrates the successful application of proposed approach in recovering a water-filled mined-out area in a coal field located in Ye county, Henan province, China. The results support the introduction of pseudo-seismic imaging technology in long-offset version of TEM which can also be an useful aid if integrated with seismic reflection technique to explore possibilities for high resolution EM imaging in future.