Pebax-based composite hollow fibre membranes are promising candidates for industrial gas separation, but their application is limited by the inherent separation performance of the polymeric materials and the poor operational stability especially under elevated pressures. The incorporation of metal–organic frameworks (MOFs) has been extensively investigated as a potential solution to these problems. However, the major challenges are to control the microvoids in the interfacial region and to improve the effective MOF loading within the selective layer. In this work, we applied a zirconium-based rigid MOF (UiO-66) to fabricate a nanocomposite hollow fibre membrane, and (–COOH) and (–NH2) modified UiO-66 were applied to investigate the effect of surface functionalization. Up to 80 wt% UiO-66 was incorporated into the thin Pebax selective layer, and both improved CO2 permeance and selectivity were obtained simultaneously with the (–NH) functionalized UiO-66. In addition, the presence of UiO-66 in Pebax significantly improved the membrane's operational stability under high pressure.
Graphene oxide (GO) has been considered as a promising candidate for molecular separation because of its capability to form highly efficient gas flow intergalleries. However, a major challenge is the lack of a facile, scalable, low-cost membrane fabrication approach, especially for the hollow fiber composite membrane with a thin selective layer. By using a facile dip-coating technique, we prepared a shear-aligned GO/Pebax composite hollow fiber membrane on a porous polymeric support. The incorporation of the aligned GO laminates significantly improved the original Pebax (polyethylene oxide–polyamide block copolymer) membrane permeance without compromising the CO2/N2 selectivity, and the composite membrane had good operational stability and enhanced mechanical strength. We further investigated the formation mechanism of the shear-aligned GO structure and discovered that the control of the withdrawal speed and liquid film thickness was a key factor. This dip-coating technique offers significant opportunities to exploit the GO-based membrane for industrial CO2 capture.
1 October 2004 in Separation and Purification Technology