SUMMARY: Cotton–wheat (CW) is an important cropping system in South Asia. Wheat yields under a conventional CW system are generally lower compared to a rice–wheat system due to delayed seeding. Relay seeding of wheat can help timely sowing, capturing residual soil moisture of last irrigation to cotton, and increase the productivity and profitability of CW system. The field experiment included two Bt-cotton genotypes having different canopy cover (RCH 776 and MRC 7017), two types of relay seeders (RSs) for cotton planted at 67.5-cm and 101-cm row spacing and four types of relay seeding methods (manual broadcast, strip rotor (SR) and zero-till double disc and conventional till). Relay planting of wheat allowed one additional boll picking, which increased seed cotton yield by 12% compared with conventional tillage wheat. Cotton genotypes and RSs had no effect on emergence and yield of wheat. The RSs with SR and zero till double disc furrow openers performed better in terms of wheat emergence and grain yield compared to zero-till tine openers. Under relay seeding, wheat sowing was advanced by 31 days, which increased grain yield by 18.8% compared with conventional tillage practice. Net returns from the CW system with relay seeding of wheat were higher by US$ 311 to 425 ha−1 compared with the conventional CW system.
Large-scale burning of rice straw causes air pollution and deterioration of soil health, which challenges the sustainability of the rice–wheat system (RWS) in north-western India. In a field experiment on sandy loam (Typic Ustochrept) soil at Punjab Agricultural University, India, with split plot design, effects of four nitrogen (N) levels (0, 90, 120, and 150 kg N ha−1) in main plots and four levels of rice straw (RS) incorporation (0, 5, 7.5, and 10 Mg ha−1) in wheat in sub-plots were studied after 7 years on carbon (C) pools at maximum tillering (MT) and flowering (FL) stages of wheat and crop yields. Rice straw (RS) incorporation at 10 Mg ha−1 with N application at 120 kg N ha−1 in wheat not only increased labile C pools significantly especially at MT but also increased the wheat yield compared with no straw incorporation. Principal component analysis suggests that total polysaccharide carbon, basal soil respiration, and pH can be used as sensitive parameters for assessing soil quality in RWS.
A study was conducted to measure the effect of different rice straw load conditions on the operational and performance characteristics of three different straw chopping machines available in the region. The field capacity of reel type straw chopper was higher (0.39 ha/h) compared with mulcher (0.31 ha/h) and stud type chopper (0.31 ha/h) under low straw load conditions. However, when operating in high rice straw load condition (9.5 t/ha), field capacity of reel type chopper (0.2 ha/h) was significantly lesser than mulcher (0.28 ha/h) and stud type chopper (0.26 ha/h). The fuel consumption of mulcher was lower by 28.8 and 30.9% over reel and stud type choppers and was independent of straw load conditions. On the other hand, field capacity and fuel consumption of reel and stud type chopper were significantly affected by straw load condition. Also, while choking of bruising system of reel type choppers was recorded when operating in high straw load condition, the operation of the mulcher remained unaffected. However, material handling capacity was better for stud type chopper (91.7 to 96.1%) compared with reel type chopper (66.9 to 88.3%) and mulcher (76.2 to 87.9%). Under low straw load condition, weighted mean size (WMS) of straw was similar for mulcher, reel and stud type chopper. However, under high rice straw load condition, WMS of straw for reel and stud type chopper was smaller compared with mulcher. For achieving better size reduction of rice residue, one could prefer stud type chopper over mulcher and reel type chopper. However, to achieve high field capacity, fuel efficiency, maneuverability, economics and lesser choking; mulcher was preferable over stud and reel type chopper. The repair and maintenance cost of reel and stud type chopper was more compared with mulcher due to a greater number of moving parts/components. In conclusion, mulcher was found to be a robust machine, which is capable of performing well in varied straw load conditions.
The super straw management system (SMS) is fitted at the back of the combine harvester and below the straw walkers. Thus, it is not possible for the operator to monitor the working of SMS. The rotor of SMS operates at a high speed (1800 rpm) and any reduction in the rotor speed can cause straw blockage in the combine harvester. The blockage of straw can damage/break the straw walkers of the harvester, which adversely affect the performance of the system. Therefore, to cope with this serious problem, an automatic low-cost safety alarm was designed to prevent the damage to the combine harvester and SMS. The safety alarm works in the range of 1000 to 1800 rpm of the SMS rotor. A microcontroller based on open source software was used in the safety alarm. The safety alarm consists of Arduino microcontroller, proximity sensor, relay module, and a light switch and 12 V battery. Two proximity sensors of different makes (8 mm and 4 mm sensing distance) were used to measure the rotational speed of the SMS rotor. The safety alarm triggers a light signal whenever rpm of the straw management rotor falls below 1000 rpm. A contact and non-contact type tachometer (make) having a least count of 0.1 rpm was used to compare speed of the rotor measured using microcontroller. The average variation compared to contact tachometer was 2.1% and 1.1% for sensor1, and sensor2, respectively. Similarly, the average variation compared to non-contact tachometer was 1.8% and 0.6% for sensor1 and sensor2, respectively. Therefore, proximity sensor2 (of 4 mm sensing distance) was recommended for use in the commercial version of low-cost safety alarm. The provision of safety alarm on the SMS attachment makes the system robust against potential threat of straw blockage, thereby, will increase the life span and rate of adoption of SMS attachment in the region.
About Me
Working at the Department of Soil Science, Punjab Agricultural University, Ludhiana, India 141004.
Working at the Department of Soil Science, Punjab Agricultural University, Ludhiana, India 141004.