The development of efficient, non-noble metal electrocatalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is crucial for their application in energy storage devices, such as fuel cells and metal–air batteries. In this study, SrTi0.3Fe0.6Ni0.1O3−δ (STFN) perovskite was synthesized using the sol–gel method, and its electrocatalytic activity was evaluated using a rotating disk electrode (RDE) in an alkaline medium. STFN synthesized at the optimum synthesis temperature of 800 °C exhibited good ORR and OER performances. To further improve electrocatalytic activity, a series of Sr1−xTi0.3Fe0.6Ni0.1O3−δ (x = 0, 0.05, and 0.1) perovskites with A-site vacancies were synthesized at 800 °C. Material characterization results showed that the removal of the A-site from the perovskite led to an increase in surface oxygen vacancies, resulting in higher ORR and OER activities. The results of this study indicate that Sr1−xTi0.3Fe0.6Ni0.1O3−δ (x = 0.1) is a promising bifunctional oxygen electrocatalyst for Zn–air batteries.
Metastable Cu2O is an attractive material for the architectural design of integrated nanomaterials. In this context, Cu2O was used as the sacrificial agent to form the core–shell structure of Cu2O@HKUST-1 by in situ growth technology. The MOFs with BOPs adsorption property were gathered together by a Cu2O etching method, and the hollow structure of the HKUST-1 shell material with fast BOP adsorption was successfully constructed. The adsorption experiments showed that the HKUST-1 shell has a good adsorption effect on nitrobenzene pollutants in wastewater. The investigation of various factors affecting the adsorption, thermodynamic and kinetic equations was carried out. The adsorption equilibrium was reached within 30 min, and the maximum adsorption capacity was 94.67 mg g−1 at 298 K. The adsorption capacity of nitrobenzene by the HKUST-1 shell is in good agreement with the Freundlich model and the second-order kinetic model. The possible mechanism of adsorption of nitrobenzene by the HKUST-1 shell was discussed. The experimental results suggested that Cu-BTC materials have potential applications for wastewater treatment involving benzene pollutants.
Metal-supported solid oxide fuel cells (MSCs) are optimized via cathode and full-cell impregnation with La0.4Sr0.6Co0.2Fe0.7Nb0.1O3−δ (LSCFN). Full-cell impregnation enhances stability in CH4 and boosts performance. Analyses include EIS, XPS, and SEM.
Solid Oxide Fuel Cell (SOFC) cathodes operating in ambient atmospheric conditions inevitably encounter CO2 contamination, leading to sustained performance deterioration. In this investigation, we examined the impact of CO2 on three variants of (La,Sr)(Co,Fe)O3-δ cathodes and employed the distribution of relaxation times method to distinguish distinct electrochemical processes based on impedance spectra analysis. We meticulously analyzed and discussed the corrosion resistance of these (La,Sr)(Co,Fe)O3-δ cathodes under high CO2 concentrations, relying on the experimental data. Electrochemical impedance spectroscopy results revealed that La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF−6428), La0.4Sr0.6Co0.2Fe0.8O3-δ (LSCF−4628), and La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ (LSCFN−46271) cathodes exhibited persistent degradation when exposed to CO2 at temperatures of 650 °C or 800 °C during the durability-testing period. An increase in electrode polarization resistance was observed upon CO2 introduction to the electrode, but electrode performance recovered upon returning to a pure air environment. Furthermore, X-ray diffraction and scanning electron microscopy analyses confirmed that CO2 did not cause permanent damage to the (La,Sr)(Co,Fe)O3-δ cathodes. These findings indicate that the (La,Sr)(Co,Fe)O3-δ cathodes exhibit excellent resistance to CO2-induced corrosion.